Brands Guides About
Allen & Heath AH-IP-6 OLED Remote Controller — main product image
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath AH-IP-6 OLED Remote Controller
Allen & Heath

Allen & Heath AH-IP-6 OLED Remote Controller

The Allen & Heath IP-6 puts six dedicated rotary controls and an OLED display on any AHM-64 or dLive/Avantis zone — precise remote level management from the room itself.

$1,199.00*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Allen & Heath AH-IP-6 is a networkable hardware remote controller providing six rotary knobs and an OLED parameter display for AHM-64 matrix processors and dLive/Avantis mixing systems. In fixed-install audio contexts — conference centres, theatres, houses of worship, distributed background music systems — the IP-6 solves the problem of remote zone control without requiring a full mixing surface or a dedicated laptop at every control point. Each knob is assignable to send levels, pans, or channel routing within the connected system, and the OLED screen confirms the identity and current value of each assignment. Communication runs over standard TCP/IP Ethernet, meaning the controller integrates directly into building network infrastructure without proprietary transport layers or additional interface hardware.

The IP-6 is an integrator's tool — it is configured at the system level and deployed at operator positions where a simplified, dedicated physical interface is more appropriate than a full mixing console. Typical deployments include room volume controls in multi-zone paging systems, monitor mix send trims at stage-side positions, and presentation audio control at lecterns. The ergonomic hardware form factor and OLED confirmation display are specifically designed for operators who are not audio engineers — the physical knob provides intuitive control, and the screen removes ambiguity about what is being adjusted. For any installation built around the AHM-64 or dLive/Avantis ecosystem that requires distributed control points, the IP-6 provides the hardware interface layer at a purpose-built, install-grade build quality.

Specifications

Brand
Allen & Heath
Model
AH-IP-6
Compatible Systems
AHM-64, dLive, Avantis
Controls
6 rotary knobs
Display
OLED
Connectivity
Ethernet (TCP/IP)
Weight
5 pounds

Pros & Cons

👍 Pros

  • Six dedicated hardware knobs provide direct, one-to-one tactile control of send levels and pans without navigating software menus — critical in live zone control scenarios.
  • OLED display confirms parameter values and assignments at the controller location, enabling confident independent operation away from the main mix position.
  • Standard TCP/IP Ethernet connectivity integrates into existing network infrastructure without proprietary cabling or additional interface hardware.
  • Compatible with both AHM-64 matrix processing and dLive/Avantis mixing platforms, covering Allen & Heath's primary professional install and live product lines.
  • Ergonomic hardware form factor is designed for permanent mounting in operator positions, lecterns, or wall panels in fixed-install environments.

👎 Cons

  • Compatibility is limited to AHM-64, dLive, and Avantis systems — the IP-6 cannot function with any other Allen & Heath platform or third-party mixing system.
  • Ethernet-only connectivity with no battery option makes the unit unsuitable for portable or touring applications.
  • Six knobs is a fixed physical count — installations requiring simultaneous control of more than six parameters require additional IP-6 units or a different control solution.
  • At 5 pounds, the unit is heavier than its small control surface footprint would suggest, which may require planning for secure wall or furniture mounting.

Frequently Asked Questions

The IP-6 is designed for use with the AHM-64 matrix processor and dLive and Avantis mixing systems. It connects over standard TCP/IP Ethernet and does not require proprietary cabling — any Cat5e or Cat6 network run will carry the control connection. It is not compatible with other Allen & Heath platforms such as the SQ or Qu series.
Each knob can be assigned to control send levels, pans, or channel assignments on the connected AHM-64 or dLive/Avantis system. Assignment is made at the system level, so the IP-6 can be configured as a zone volume controller, an output matrix trim controller, or a monitor mix remote depending on the installation's requirements.
The OLED display provides visual confirmation of parameter values and channel labels at the controller itself, so the operator does not need to reference the main mixing surface or a laptop to confirm what a knob is controlling or what its current position is. In a fixed-install environment where the IP-6 may be wall-mounted away from the main console, this is the difference between confident and approximate operation.
The IP-6 communicates via standard TCP/IP, meaning it can operate on a shared managed network provided sufficient bandwidth and QoS prioritization are in place for control traffic. For professional install applications, a dedicated VLAN for audio control is recommended to prevent latency spikes from competing network traffic from affecting controller response time.
The IP-6 is purpose-designed for fixed-install applications — conference rooms, houses of worship, theatres, and distributed audio systems where remote zone control is needed at a permanent location. Its Ethernet-only connectivity and lack of a portable enclosure or battery option make it impractical as a touring accessory.

Related Products