Brands Guides About
Behringer MOTORFADERMF60T Motorized Faders Set of 5 — main product image
Behringer MOTORFADERMF60T Motorized Faders Set of 5
Behringer MOTORFADERMF60T Motorized Faders Set of 5
Behringer MOTORFADERMF60T Motorized Faders Set of 5
Behringer

Behringer MOTORFADERMF60T Motorized Faders Set of 5

★★★★★5.0 (1 reviews)
49999999439W

Five precision-engineered 60mm motorized faders that restore smooth, responsive DAW automation to your Behringer MOTÖR controller.

$119.00*
Check availability

*Price sourced from Amazon.com. Last updated:Jun 19, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Behringer MF60T Motorized Faders set exists to solve a specific, frustrating problem: a MOTÖR keyboard controller that has lost the smooth, precise fader response its automation workflow depends on. Motorized faders take more mechanical stress than passive controls — every automation pass cycles the motor and wiper contact, and over time that translates to scratchy signal output, erratic jumps in your DAW, and motors that hunt or refuse to settle. When that happens in the middle of a session, it's not a minor inconvenience; it breaks the tactile feedback loop that makes hardware control worth using in the first place.

The MF60T units address that directly with phosphor bronze wipers finished in silver coating — a material spec chosen for low contact resistance and long wear life rather than cost minimization. The 60mm travel matches the original MOTÖR fader specification, so motor calibration, DAW resolution, and automation throw all behave as the controller was designed to operate. The five-unit set is practical for targeting multiple degraded faders in a single repair pass. Installation is a soldering job, not a tool-free swap, but for a technician or experienced DIYer the replacement is straightforward and the result — clean, responsive fader control back in the signal chain — is immediately audible in how your automation plays back and how the controller feels under your hand.

Key Features

Set of 5 Motized 60mm Replacement Faders f Behringer Mot61 Mot49 MIDI Controller Keyboards

Item Package Dimension: 9.899999989902L x 5.49999999439W x 1.299999998674H inches

Item Package Weight - 0.80027801106 Pounds

Item Package Quantity - 1

Product Type - AUDIO MIDI CONTROLLER

Specifications

Product Type
AUDIO MIDI CONTROLLER
Fader Type
Motorized
Fader Length
60mm
Quantity
Set of 5
Compatibility
Behringer Mot61, Mot49 MIDI Controller Keyboards
Package Dimensions (L x W x H)
9.9 x 5.5 x 1.3 inches
Package Weight
0.80 pounds

Pros & Cons

👍 Pros

  • Silver-coated phosphor bronze wipers deliver low-resistance contact and clean control signal output.
  • 60mm travel matches the original MOTÖR keyboard fader spec precisely, preserving motor throw and automation accuracy.
  • Five-pack provides enough units for a targeted multi-fader replacement without overpaying for individual units.
  • Motor-driven design supports DAW automation playback and hardware recall, keeping your workflow intact.
  • Purpose-built compatibility with MOTÖR 49 and MOTÖR 61 eliminates guesswork on fitment.

👎 Cons

  • A full nine-fader replacement on the MOTÖR 61 requires purchasing additional sets beyond this five-pack.
  • Installation requires PCB soldering skills — not a plug-and-play swap for users without rework experience.
  • No individual fader sold separately, so minor single-fader failures still require purchasing a set.
  • No documentation or installation guide included in the package.

Frequently Asked Questions

Yes — the MF60T set is designed as a direct replacement for the factory-installed motorized faders in the MOTÖR 49 and MOTÖR 61 series. Each fader retains the same 60mm travel and motor-driven recall behavior the keyboard was built around, so your DAW's automation playback and mix recall will operate as originally intended after installation.
The wipers are phosphor bronze with a silver coating — a professional-grade material choice that minimizes contact resistance and reduces the scratchy, intermittent signal behavior that degrades over time with cheaper carbon wipers. You should hear cleaner, more consistent control signal output compared to worn original faders.
If cleaning with fader lube resolves crackling or jumping, the existing faders may still be serviceable. If you're seeing erratic automation jumps, motor hunting (the fader moving back and forth without settling), or dead zones in the travel, the physical wiper or motor mechanism has likely worn past the point of cleaning. Replacement is the correct fix.
This listing includes five motorized faders. The MOTÖR 61 has nine faders total, so one set will not replace every fader on the unit. You'll need to assess which faders are degraded and purchase accordingly — or order two sets if a full replacement is planned.
Yes — these are PCB-mounted components. Installation requires desoldering the original faders from the controller's main board and reflowing the replacement units. This is a task suited to someone comfortable with SMD or through-hole rework. If you're not experienced with PCB soldering, professional service is recommended to avoid board damage.

Related Products