Elite Screens

Elite Screens ETB115HD5-E8 Evanesce Tab-Tension ALR Projector Screen

4.1 (169 reviews)
4K

A 115-inch CineGrey 5D ALR screen that disappears into the ceiling when the session ends and rejects ambient light when it's deployed.

$2,999.00*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Elite Screens Evanesce ETB115HD5-E8 is a 115-inch, in-ceiling motorized projection screen built around CineGrey 5D angular-reflective ALR material — a screen surface engineered specifically for installations where ambient light control is incomplete. At 1.5 gain with an 80-degree viewing angle, the CineGrey 5D rejects off-axis ceiling and ambient light while directing the projector's output toward the seated audience, producing contrast levels in mixed-light environments that a standard white screen cannot achieve. The tab-tension system runs tensioned cables along both side edges of the screen, holding the 100.4-inch-wide surface flat under its own weight — essential at this diagonal size where an untensioned screen would develop visible undulation that distorts projected geometry.

The in-ceiling recessed installation is the signature design feature: when the screen is raised, it disappears entirely into the ceiling cavity, leaving no visual indication of a projection system in the room. The quiet tubular motor deploys and retracts the screen smoothly, and the included IR and RF remotes handle basic control — but the 5-12V projector trigger input is where this screen earns its place in integrated AV environments, enabling fully automated deployment tied directly to projector state. GREENGUARD GOLD certification and NFPA 701 flame retardant compliance confirm this is a screen built to specification for permanent installation in occupied commercial and residential spaces, not a consumer-grade product that happens to be large.

Key Features

115" Diag. 16:9 Aspect Ratio. View Size: 56.6" H x 100.4" W. with Concealed Installation - White Casing

Screen Material: CineGrey 5D, 1.5 Gain a 4K Ultra HD and Active 3D Projection Ready Screen Surface. Angular-Reflective Ceiling/Ambient Light Rejecting (CLR/ALR) FRONT Projection Material with an 80° Viewing Angle. Easy to Clean and Care For. Not Recommended for Ultra Short or Short Throw Projectors. GREENGUARD and GREENGUARD GOLD UL 2818 Certified for Safety Indoor Emissions free

In Ceiling Concealed Installation Kit for Disapearing Effect , Can Be Installed Below Ceiling If Preferred. Quite Tubular Motor with Superior Weight Tolerance Easily Lowers and Raises the Screen at the Push of a Button. Flame Retardant, Complies with NFPA 701 Standards and is GREENGUARD GOLD Certified

Internal Infrared and Radio Frequency receivers with IR/RF remotes included, 5-12V Projector Trigger, Complete Installation Kit

2-Year / 3-Year ENR-G, Manufactures Warranty by Elite Screens' an ISO9001 manufacturer since 2004 and Lifetime Tech Support by Email, Web Chat or Toll Free Phone Call by Elite's Professional Service Team.

Specifications

Diagonal Size
115 inches
Aspect Ratio
16:9
Viewable Height
56.6 inches
Viewable Width
100.4 inches
Screen Material
CineGrey 5D
Gain
1.5
Viewing Angle
80°
Casing Color
White
Certifications
GREENGUARD, GREENGUARD GOLD UL 2818, NFPA 701

Pros & Cons

👍 Pros

  • The CineGrey 5D ALR material rejects ceiling and off-axis ambient light at a 1.5 gain rating, enabling usable image contrast in lit rooms where a standard white screen would wash out completely.
  • Tab-tension construction keeps the 100.4-inch-wide screen surface flat across its full width, eliminating the wave and sag distortion that untensioned screens develop at this diagonal size.
  • In-ceiling concealed installation makes the screen invisible when not in use — a critical advantage in multi-purpose rooms where a permanently visible screen would compromise the space aesthetically.
  • Both IR and RF remote operation plus a 5-12V projector trigger allow full integration into AV control systems for automated screen deployment tied to projector power state.
  • The quiet tubular motor lowers and raises the screen without distracting mechanical noise — relevant in conference and screening environments where a loud motor creates friction at the start and end of sessions.

👎 Cons

  • CineGrey 5D's 80-degree viewing angle means viewers seated sharply off-axis will see a significant drop in brightness compared to center-seat positions — seating layout must be planned around the screen's angular performance.
  • Short-throw and ultra-short-throw projectors are explicitly incompatible with this screen material — any future projector upgrade toward a UST unit requires a full screen replacement.
  • In-ceiling installation requires a recessed ceiling cavity of sufficient depth and clean access for electrical and trigger wiring — this is not a simple DIY install in most finished rooms.
  • At 115 inches diagonal, the screen's 100.4-inch width demands careful room geometry planning; throw distance requirements for standard projectors at this size can exceed comfortable living room or conference room depths.
  • The 1.5 gain characteristic narrows the sweet-spot viewing cone relative to lower-gain screens — viewers outside the central viewing zone will experience brightness falloff that a unity-gain screen would not produce.

Frequently Asked Questions

CineGrey 5D is an angular-reflective ambient light rejecting material — it redirects light from a ceiling-mounted projector toward the viewing audience while rejecting off-axis ambient light from windows, overhead fixtures, and room lighting. In a media room or screening space with unavoidable ambient light, this translates directly to higher perceived contrast and image pop compared to standard gain screens in the same environment.
No — the CineGrey 5D material is explicitly not recommended for short-throw or ultra-short-throw projectors. The angular-reflective optics require a standard throw angle from a ceiling-mounted or longer-throw projector to function correctly. Using a short-throw source with this screen will produce uneven brightness and hotspotting.
The screen includes both IR and RF remotes for direct control, and it also supports a 5-12V projector trigger input — meaning a compatible projector or automation controller can raise and lower the screen automatically when the projector powers on or off. This is the correct integration path for AV control systems and home automation setups.
Tab-tension systems use tensioned side cables to keep the screen surface uniformly flat across the entire viewing area. At 115 inches diagonal, an untensioned screen would show visible waves or sag under its own weight over time — tab-tension eliminates that, producing a flat, consistent surface that prevents image distortion at the edges and corners.
GREENGUARD and GREENGUARD GOLD (UL 2818) certification verifies that the screen material meets strict chemical emission standards for indoor air quality. This is relevant for permanent installation in occupied spaces — classrooms, conference rooms, and residential media rooms — where long-term off-gassing from materials is a health consideration.