Fujifilm
Fujifilm Prescale Medium MS Pressure Mapping Film
10.6 in
Instantly visualize surface pressure distribution from 1,400 to 7,100 PSI with Fujifilm Prescale film.
$171.00*
Check availability
*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Characterize surface pressure between any two mating, touching, or impacting surfaces. The dimensions of this film are 3ft. x 10.6 in.
Prescale provides a surface pressure “map” that illuminates actual pressure magnitude (in precise PSI or kg/cm^2) and distribution between your two surfaces. The pressure range of this film is 1,400 - 7,100 PSI (100 - 500 kg/cm²)
Prescale reveals the contact surface pressure by virtue of a color change. This color change is instantaneous (less than a millisecond) and permanent
Prescale comes on a roll, is super thin, and can easily be cut from the supplied roll with scissor or laser to your precise application requirement
The color intensity of the film is directly related to the amount of pressure applied to it
All films guaranteed to have 18 months of shelf life available.
Specifications
Brand
Fujifilm
Model
Prescale Medium (MS)
Pressure Range
1,400–7,100 PSI (10–50 MPa)
Dimensions
3 ft. x 10.6 in.
Film Type
Pressure Indicating Film (Two-Sheet System)
Application
Surface Pressure Mapping
Pros & Cons
👍 Pros
- Provides an instant visual map of pressure distribution without electronic sensors or complex setup
- Paper-thin profile fits between mating surfaces without altering the contact dynamics being measured
- No power source, wiring, or data acquisition equipment needed for basic visual analysis
- Results are permanently recorded on the film for documentation and comparison purposes
- Can be cut to any shape to match irregular contact surfaces
👎 Cons
- Each piece of film is single-use, so repeated testing requires additional material
- The 1,400–7,100 PSI range requires purchasing different Prescale grades for pressures outside this band
- Results are sensitive to temperature and humidity, which can affect color development accuracy
- Quantitative analysis requires separate digitizing software or equipment not included with the film
- The 3-foot roll length may be insufficient for large-scale or high-volume testing applications
Frequently Asked Questions
How does Fujifilm Prescale pressure film work?
The film contains microencapsulated color-forming layers. When pressure is applied, the capsules rupture proportionally to the force, producing a color intensity map — darker areas indicate higher pressure, lighter areas indicate lower pressure.
What pressure range does the Medium (MS) grade measure?
The Medium grade measures pressures between 1,400 and 7,100 PSI (10 to 50 MPa), making it suitable for moderate-pressure applications like bolted joint analysis and seal verification.
Is this a single-sheet or two-sheet system?
The Prescale Medium (MS) is a two-sheet system consisting of a transfer sheet (C-film) and a developer sheet (D-film) that must be used together to produce the pressure image.
Can the results be quantified or is it only a visual indicator?
While the film provides an immediate visual map, the results can be digitized and quantified using Fujifilm's FPD-8010E analysis system or compatible third-party software to obtain precise pressure values and distribution data.
What are the dimensions of this roll?
This roll measures 3 feet long by 10.6 inches wide, which can be cut to size for specific applications.
Related Products
