Brands Guides About
Global Truss Snap Clamp Medium Duty 50mm Tubing — main product image
Global Truss

Global Truss Snap Clamp Medium Duty 50mm Tubing

★★★★★5.0 (2 reviews)

A medium-duty hook clamp rated to 440 lbs keeps your fixtures locked solid on 50mm truss without adding bulk to your rig.

$24.00*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Global Truss Snap Clamp is a medium-duty hook-style mounting clamp rated to 440 lbs, designed to secure lighting fixtures to standard 50mm truss tubing. Its low-profile hook mechanism allows fixtures to be added to any point along a truss span without disassembling the rig from the end — a meaningful time advantage during stage turnarounds and multi-show tour schedules. The clamp's geometry keeps the fixture body sitting close to the tube, which reduces the rotational stress that a long standoff arm would introduce at full load.

Construction is consistent with Global Truss's hardware lineup: the clamp is built to handle the physical demands of repeated touring use, with a snap closure that engages quickly during setup and releases cleanly during breakdown. As with all hook-style clamps, pre-rig inspection of the closure is essential — confirm the hook is fully seated and that a rated safety cable is attached directly to every fixture before any truss is raised. The Snap Clamp is sized specifically for 50mm tube and will not fit smaller diameter profiles, so verify your truss spec before ordering.

Key Features

Medium-duty Low-profile Hook-style Lighting Clamp for 50mm Tubing

Specifications

Type
Medium Duty Hook-Style Clamp
Compatible Tubing
50mm diameter
Load Capacity
440 lbs (200 kg)
Brand
Global Truss
Model
Snap Clamp

Pros & Cons

👍 Pros

  • 440 lb load rating provides substantial holding strength for most stage and studio lighting fixtures on 50mm truss.
  • Hook-style snap closure speeds up mid-span fixture placement without disassembling the truss run.
  • Low-profile design keeps the clamped fixture sitting close to the tube, reducing lever-arm stress on the mount.
  • Compatible with any standard 50mm round tube, making it useful across multi-brand rig systems.
  • Medium-duty construction balances weight savings with the structural integrity needed for repeated setup and teardown cycles.

👎 Cons

  • Designed exclusively for 50mm tubing — not usable on 35mm, 40mm, or non-round tube profiles without a separate adapter.
  • Hook-style closure requires careful inspection before each use to confirm full engagement; a partially seated hook is a rigging hazard.
  • No integrated safety cable attachment point on the clamp body itself — you must rig safety cables directly to the fixture.
  • Medium-duty rating means it is not the right choice for heavier moving head fixtures or densely packed fixture runs that push the clamp's limits.

Frequently Asked Questions

The Snap Clamp is engineered specifically for 50mm tubing — the standard diameter used in most Global Truss and compatible truss systems. It will not seat correctly on 35mm or 40mm tube.
The medium-duty Snap Clamp is rated to 440 lbs (200 kg). Always factor in a safety margin and verify that your truss system's own load rating supports the combined fixture weight before rigging.
The hook-style design lets you clip the clamp onto tubing without threading it from the end — useful when fixtures need to be added mid-span on an already-assembled rig. The snap closure secures the clamp around the tube quickly during setup and breakdown.
The Snap Clamp is rated for medium-duty applications. For overhead or flown truss rigs, always consult your local rigging standards, use rated safety cables on all fixtures, and confirm that the clamp's load rating meets the requirements for your specific installation.
Yes — the clamp is compatible with any 50mm-diameter tube, regardless of brand, as long as the tube is round and within the standard 50mm spec. Verify fitment on square or non-standard profiles before use.

Related Products