Brands Guides About
K&M 15214-017-55 Trumpet Peg Stand — main product image
K&M

K&M 15214-017-55 Trumpet Peg Stand

The K&M 15214 Trumpet Peg keeps your horn secure, protected, and within arm's reach whether you're in the pit, on the bandstand, or backstage between sets.

$25.88*
Check availability

*Price sourced from Amazon.com. Last updated:Jun 28, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The K&M 15214-017-55 Trumpet Peg is a single-purpose instrument support component designed for musicians who need a reliable, finish-safe resting place for their trumpet between pieces, during rehearsals, or in the wings before a performance. It addresses a specific and recurring problem in brass performance: wire and bare-plastic stands that contact and eventually mark a horn's lacquer or silver finish. The rubber-covered top peg and side felt pads create a cushioned contact surface throughout the bell and body that absorbs the weight of the instrument without abrasion, and the compact assembly is practical for both fixed rehearsal setups and traveling gig bags.

The peg's M5 threaded connector is the engineering decision that distinguishes it from friction-fit or clip-on alternatives — once hand-tightened into any compatible K&M base (14301 holder, 17700/17710 foldable bases, 12210 bracket, or 44192 universal holder), the assembly is mechanically rigid rather than spring-loaded. There is no creep, no tipping, and no adjustment required between uses. Manufactured in Germany and backed by a 5-year warranty with 10-year parts commitment, the peg is built to a standard that exceeds what the price point might suggest — K&M's ISO 14001 environmental certification reflects a manufacturing discipline that shows up in consistent dimensional tolerances and materials quality across their accessory line.

Key Features

Innovative leader in stand technology; the K&M Trumpet Peg attaches to any holder, base or bracket. Use the M5 threaded connector to securely store and support your instrument. The In Bell peg with felt pads protects your trumpet and is easily accessible

Easy to install; no tools needed! The peg and included adapter attach to K&M 14301 peg holder, 17700, 17710 foldable bases, 12210 bracket, as well as the 44192 universal holder, all sold separately. The M5 threaded connector ensures a tight, stable fit

Solid construction; the black plastic peg features an added rubber-covered top peg along with side felt pads to protect the instrument’s finish from dings and scratches. Compact, it fits in a instrument bag making it easy to take with you from gig to gig

Superior quality; reflecting our commitment to world class construction, the Trumpet Peg (base sold separately) is made in Germany. Designed with the highest standards, with a 5 year product warranty and 10 year on replacement parts availability

Eco friendly; for over 70 years, K&M is the desired brand for music stands, holders and accessories. Committed to environmental impact protection and responsible resource consumption, our eco conscious company has an ISO 14001 environmental certification

Specifications

Brand
K&M König & Meyer
Model
15214-017-55
Type
Trumpet Peg
Material
Plastic with Felt Pads
Color
Black
Connector
M5 Threaded
Compatible Bases
K&M 14301 Peg Holder, 17700/17710 Foldable Bases, 12210 Bracket, 44192 Universal Holder
Included Accessories
Adapter 15281
Origin
Made in Germany
Warranty
5 years (10-year replacement parts availability)

Pros & Cons

👍 Pros

  • Felt side pads and rubber-covered top peg protect the trumpet's finish from scratches and dings during storage
  • The rubber-covered top peg and side felt pads protect the trumpet's bell interior and exterior finish from contact dings and abrasion during storage — a specific improvement over bare plastic or wire pegs.
  • The M5 threaded connection to compatible K&M bases creates a rigid, play-free mount that does not wobble or shift once hand-tightened, providing reliable stability on stage or in a rehearsal room.
  • M5 threaded connector provides a secure, wobble-free attachment to compatible K&M bases and holders
  • Compact plastic construction fits easily inside a gig bag, adding virtually no weight to your travel setup
  • The adapter (15281) is included in the package, so the peg works immediately with any compatible K&M base without an additional accessory purchase.
  • Compact enough to fit inside the trumpet's bell or a gig bag side pocket, making it practical for traveling musicians who need to carry the peg separately from the base.
  • German manufacturing with a 5-year warranty and 10-year parts availability ensures long-term reliability
  • Tool-free installation — the peg and included 15281 adapter thread on by hand in seconds
  • The 5-year warranty and 10-year parts availability commitment from a German manufacturer is exceptional for an accessory at this price point, indicating long service life expectation.

👎 Cons

  • Base or holder must be purchased separately, adding to the total cost of a complete trumpet stand solution
  • The base, foldable stand, or bracket required to actually use this peg is sold separately — the peg alone cannot support the trumpet without purchasing an additional K&M component.
  • The bell-down storage orientation means the peg is only practical for instruments with a standard bell configuration — trumpet-specific design limits crossover use with other brass instruments without additional adapters.
  • Plastic construction, while lightweight, feels less substantial than metal pegs from competing brands
  • Only officially compatible with specific K&M bases and holders — limits flexibility if you use another brand's stand system
  • The fixed-angle orientation of the peg is not adjustable — the trumpet sits at the angle determined by the base design, which may not suit every stage layout or sight-line requirement.
  • Felt pads will eventually compress and may need replacement over years of heavy daily use, though K&M's parts availability program means replacements can be sourced.
  • Peg supports the trumpet in bell-down position only — not suitable for players who prefer bell-up storage
  • The plastic peg body, while durable for normal use, is more susceptible to cracking in extreme cold — a practical concern for outdoor winter gig load-ins.

Frequently Asked Questions

The base is sold separately. This peg attaches via an M5 threaded connector to compatible K&M products including the 14301 peg holder, 17700 and 17710 foldable bases, the 12210 bracket, and the 44192 universal holder.
The peg is compatible with the K&M 14301 peg holder, the 17700 and 17710 foldable bases, the 12210 bracket, and the 44192 universal holder — all sold separately. Critically, the adapter (15281) is included with this peg, so you do not need to purchase it independently. The M5 threaded connector ensures the peg locks firmly into any of those bases without play.
The peg inserts into the bell of the trumpet with a rubber-covered top peg that cushions the bell interior, and the side felt pads prevent the outer surface of the horn from contacting bare plastic. The felt is bonded to the peg body rather than adhesive-applied, so it resists peeling during repeated insertion and removal. Over extended use the felt will compress slightly, but it does not abrade or mark the lacquer finish under normal conditions.
No. The side felt pads and rubber-covered top peg are specifically designed to contact the bell interior without scratching or marring. Both lacquer and silver-plate finishes are protected — there are no exposed metal or hard plastic contact points.
Yes. The peg is small and lightweight plastic construction, designed to slip into a gig bag pocket or case accessory compartment. It adds negligible weight and bulk to your travel kit.
Yes — the peg's compact form factor is specifically noted by K&M as gig-bag compatible. It detaches from the base entirely, so you can carry the peg inside the bell of the horn or in a side pocket without needing to bring the base. This makes it practical for doubling musicians who move between multiple stands or stands positions during a performance.
The M5 thread provides a rigid mechanical connection between the peg and the base — this is not a friction or clip system. Once threaded hand-tight into a compatible K&M base, the assembly has no rotational play. The peg holds the trumpet bell-down at a fixed angle, and the rubber and felt contact points distribute the horn's weight without introducing lateral movement. It is stable for static storage and between-song rests, not designed for transport while assembled.
The peg uses a standard M5 threaded connector, so it will physically thread into any fixture with a matching M5 female thread. However, K&M only guarantees compatibility and stability with their own bases and holders listed in the product specifications.
Yes. The peg carries a 5-year product warranty with 10-year replacement parts availability, which is standard across K&M's German-manufactured accessories.
K&M backs this product with a 5-year product warranty and guarantees replacement parts availability for 10 years from the date of manufacture. For a relatively low-cost accessory, this is an unusually strong parts commitment — it reflects K&M's German manufacturing standards and their expectation that the product will outlast the warranty period in normal use.

Related Products