Brands Guides About
Kupo KG012412 5/8in Baby Stud with 1/4in-20 Male Adapter — main product image
Kupo KG012412 5/8in Baby Stud with 1/4in-20 Male Adapter
Kupo KG012412 5/8in Baby Stud with 1/4in-20 Male Adapter
Kupo KG012412 5/8in Baby Stud with 1/4in-20 Male Adapter
Kupo

Kupo KG012412 5/8in Baby Stud with 1/4in-20 Male Adapter

★★★★★4.8 (27 reviews)
8in4in

One compact stud, two essential standards — this Kupo baby pin bridges 5/8" grip hardware and 1/4"-20 accessories so your monitor mounts exactly where the shot needs it.

$9.95*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Kupo KG012412 occupies a critical but often overlooked position in a working grip kit — it's the bridge piece that lets your 5/8" grip infrastructure support the 1/4"-20 accessory world of monitors, articulating arms, and camera accessories. On a stills set, it means your C-stand can hold a monitor arm base without a chain of adapters. On a video rig, it seats cleanly into any baby receiver and offers an immediate, standardized attachment point for a wide range of on-set accessories. The 3.5" length is well-chosen: enough to clear the knuckle assembly without adding unnecessary rig depth.

What separates the Kupo from economy alternatives is the material choice: solid steel holds its geometry through the repetitive tightening and releasing cycles that accumulate fast on a busy production. Aluminum adapters in this role tend to develop micro-play over time as the receiver contact surfaces wear — steel resists that drift. It's a small detail that matters when you're trusting a monitor's position to stay where you aimed it through a full day of shooting. For photographers and videographers building a reliable grip kit, stocking several of these in different setups pays dividends every time you need a clean, fast mounting solution.

Key Features

SPECIFICATIONS: Steel baby stud mounting pin with standard 5/8" interface, 3.5" length, and integrated 1/4"-20 male thread for monitor and grip mounting in photography and video production.

COMPACT MOUNTING SOLUTION: 3.5" length provides sufficient reach while maintaining a low profile for clean, controlled setups.

STANDARD THREAD INTERFACE: 1/4"-20 male thread supports direct attachment of monitors, accessories, or mounting hardware.

DURABLE STEEL BUILD: Solid steel construction ensures strength and long term reliability during repeated professional use.

ESSENTIAL GRIP COMPONENT: Ideal for photographers and videographers needing dependable mounting pins for monitors and grip accessories.

Specifications

Stud Diameter
5/8" Baby Stud
Thread
1/4"-20 Male
Length
3.5 inches
Material
Steel
Compatible Interface
5/8" Baby Receiver (grip heads, C-stands, light stands)

Pros & Cons

👍 Pros

  • The dual-standard interface solves a real on-set compatibility problem in a single 3.5" component — no additional adapters needed to bridge grip hardware to camera accessories.
  • Solid steel construction maintains tight, play-free fit in baby receivers even after hundreds of repositioning cycles across long productions.
  • The 3.5" length hits the practical sweet spot — enough reach to clear arm hardware cleanly without extending the rig further than necessary.
  • The 5/8" baby stud interface means this works with virtually every grip stand, arm, and C-stand knuckle already on your gear list.
  • Compact enough to carry multiples in a pocket pouch, making it easy to stage monitor and accessory mounts quickly anywhere on set.

👎 Cons

  • Steel construction adds slightly more weight per unit than aluminum alternatives — a minor consideration when carrying a full grip package over a long shooting day.
  • The 1/4"-20 male thread end limits direct mounting to 1/4"-20 female accessories only; heavier accessories or 3/8" threaded gear require an additional adapter.
  • No rubber or knurled grip surface on the stud shaft, which means it relies entirely on receiver tightening for lock — verify your knuckle is fully engaged before trusting weight to it.
  • At 3.5" fixed length, rigs requiring more extension or a shorter profile will need a different stud length rather than an adjustable alternative.

Frequently Asked Questions

Yes. The 5/8" baby stud is the universal grip standard — it seats directly into any baby receiver on a C-stand arm, grip head, or light stand. That's the broad end of the stud, and it locks in with the same knuckle tightening you already use for every other grip component on set.
Any accessory with a 1/4"-20 female receiver — small monitors, magic arm bases, articulating arms, cold shoe adapters, and a wide range of camera accessories. It's the same thread as a standard tripod mount, so the compatibility list is extremely wide.
For most single-monitor arms and articulating arm bases, yes. The 3.5" length provides enough reach to clear a knuckle assembly while keeping the rig compact. If you need extended reach away from the stand or into a tight rig configuration, an additional arm extension may be needed.
The solid steel construction handles the repeated tightening, repositioning, and load cycles of a working production without developing the play that aluminum develops over time. For a component that gets touched dozens of times a day, steel construction directly affects how long the stud stays tight and precise in a receiver.
Yes, provided the boom stand or arm has a baby receiver. The stud seats into the receiver and the 1/4"-20 thread accepts most small light bases, shoe adapters, or lightweight accessory mounts. Confirm the weight rating of your specific arm for heavier accessories.

Related Products