Miller
Miller MFLC-4-Z7/6FT Twin Turbo 6ft Fall Protection System
★★★★★
Uncompromising Fall Protection for Ultimate Safety The Miller by Honeywell MFLC-4-Z7/6FT Twin Turbo Fall Protection System provides continuous 100% tie-off, enhancing safety and productivity. This system offers a safer alternative to double-leg shock-absorbing lanyards, reducing fall clearance r...
$604.00*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Uncompromising Fall Protection for Ultimate Safety
The Miller by Honeywell MFLC-4-Z7/6FT Twin Turbo Fall Protection System provides continuous 100% tie-off, enhancing safety and productivity. This system offers a safer alternative to double-leg shock-absorbing lanyards, reducing fall clearance requirements and maximizing worker mobility.
- Type: Twin Turbo Fall Protection System
- Length: 6 Feet
- Connector: G2 Connector
- Material: Plastic
- Features: 100% Tie-Off, Swiveling PFLs, Webbing Retainer Clip
- Lanyard End Connector Options: Steel & Aluminum Locking Snap Hooks, Steel & Aluminum Locking Rebar Hooks
- Standards: Meets OSHA, ANSI, and CSA Requirements
Key Features
CONTINUOUS 100% TIE-OFF FALL PROTECTION: G2 connector attaches to harness webbing below the D-ring, and connects to two Miller TurboLite PFLs (6ft or 9ft) for continuous 100% tie-off fall protection
SAFER ALTERNATIVE TO DOUBLE-LEG LANYARDS: Reduces fall clearance requirements for use in more applications than double-leg lanyards; PFLs swivel to prevent webbing from twisting & binding inside unit
LIGHTWEIGHT G2 TWIN CONNECTOR: Twin Turbo G2 Connector is extremely lightweight to reduce worker fatigue and increase productivity; webbing retainer clip rotates freely to prevent gate activation
GREATER MOBILITY & PRODUCTIVITY: PFLs swivel independently in multiple directions to optimize worker mobility and versatility; this eliminates equipment switch-outs and increases overall productivity
MULTIPLE LANYARD END CONNECTOR OPTIONS: Lanyard end connector options include steel & aluminum locking snap hooks and steel & aluminum locking rebar hooks
Specifications
System Type
Twin Turbo Fall Protection System
Connector Type
G2 Twin Connector
Tie-Off Capability
Continuous 100%
Lanyard Compatibility
Two Miller TurboLite PFLs (6ft or 9ft)
Included Length
6ft
Lanyard End Connector Options
Steel/Aluminum locking snap hooks, Steel/Aluminum locking rebar hooks
Pros & Cons
👍 Pros
- Enables continuous 100% tie-off fall protection, enhancing safety by connecting two Miller TurboLite PFLs.
- Significantly reduces fall clearance requirements compared to traditional double-leg lanyards, expanding application possibilities.
- Features a lightweight G2 Twin Connector, designed to minimize worker fatigue and enhance productivity during extended use.
- PFLs swivel independently in multiple directions, optimizing worker mobility and versatility without equipment switch-outs.
- The webbing retainer clip on the G2 connector rotates freely, which helps prevent unintended gate activation for added security.
- Offers multiple lanyard end connector options, including various steel and aluminum locking snap hooks and rebar hooks, for adaptability.
👎 Cons
- Requires the separate purchase of two Miller TurboLite PFLs (6ft or 9ft) to achieve its full continuous tie-off functionality.
- The system is an advanced fall protection component, requiring users to be properly trained in its correct installation and use.
- The description does not specify the maximum weight capacity, which is a critical safety consideration for users.
- While lightweight, the overall system with two PFLs will still add weight and bulk compared to a single lanyard setup.
- Specific compatibility with different harness types and D-ring designs is not detailed, potentially requiring user verification.
Frequently Asked Questions
How does the G2 connector attach to a harness?
The G2 connector is designed to attach to the harness webbing located below the D-ring.
What is the purpose of the G2 connector in this system?
The G2 connector connects two Miller TurboLite PFLs (Personal Fall Limiters) to enable continuous 100% tie-off fall protection.
How does this system compare to double-leg lanyards in terms of fall clearance?
This fall protection system reduces fall clearance requirements, making it suitable for a wider range of applications compared to traditional double-leg lanyards.
Does the Miller Twin Turbo G2 Connector help with worker fatigue?
Yes, the Twin Turbo G2 Connector is designed to be extremely lightweight, which helps in reducing worker fatigue and potentially increasing productivity.
Can the PFLs in this system twist or bind?
The PFLs are designed to swivel independently in multiple directions, which prevents the webbing from twisting and binding inside the unit.
What are the available options for lanyard end connectors?
Lanyard end connector options include steel and aluminum locking snap hooks, as well as steel and aluminum locking rebar hooks, providing versatility.
Related Products
