Brands Guides About
Monoprice 109441 1/4
Monoprice 109441 1/4
Monoprice 109441 1/4
Monoprice 109441 1/4
Monoprice

Monoprice 109441 1/4" TRS Right Angle Audio Cable

★★★★★4.8 (723 reviews)

Clean, quiet signal routing for tight pedalboards and rack patches with gold-plated right-angle connectors and 97.5% copper braid shielding.

$11.96*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 109441 is a 6-foot 1/4-inch TRS patch cable built with 16 AWG stranded pure copper conductors and copper braid shielding at 97.5% coverage — specifications you would typically find in cables costing significantly more. The TRS wiring carries two conductors plus a common shield ground, which means it handles both balanced mono connections (for studio monitors, outboard processors, and mixer sends) and unbalanced stereo connections (for headphone extensions or stereo effects loops). The 90-degree right-angle plugs on both ends are gold-plated for corrosion resistance and smooth electrical contact, and they sit flush against gear panels to minimize cable protrusion in tight setups.

This cable is built for working signal chains — pedalboards where every inch of space matters, rack patches behind a console, or insert points on a mixing desk. The heavier 16 AWG conductors keep resistance low over the 6-foot run, which helps maintain signal integrity and low-frequency response without audible loss. The dense copper braid shielding is the real workhorse here, providing the kind of interference rejection that keeps your signal clean when routing near power supplies, transformers, or stage dimmer packs. For studio engineers patching outboard gear and live sound techs wiring up effects racks, this cable delivers professional-grade signal transfer at a fraction of boutique cable pricing.

Key Features

This cable features 90-degree TRS/Stereo plugs on each end. It uses 16 AWG stranded, pure copper conductors and employs copper braid shielding with 97.5% coverage

The plugs are gold plated to provide smooth, corrosion-free connections as well as maximum electrical conductivity.

With two separate conductors and the common shield ground, this cable can be used as an unbalanced stereo patch cable or as a balanced mono patch cable.

Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.

Specifications

Connector Type
1/4" TRS right-angle male to 1/4" TRS right-angle male
Cable Length
6 feet
Conductor
16 AWG stranded pure copper
Shielding
Copper braid, 97.5% coverage
Connector Plating
Gold
Signal Type
Balanced mono or unbalanced stereo
Model
109441

Pros & Cons

👍 Pros

  • 97.5% copper braid shielding provides excellent noise rejection, keeping the signal clean even near power supplies and stage lighting rigs.
  • 16 AWG stranded pure copper conductors deliver lower resistance than typical 20–24 AWG patch cables, preserving signal level and low-end clarity.
  • Dual right-angle connectors fit flush against pedalboard junctions and rack panels without protruding or stressing adjacent jacks.
  • Gold-plated plugs ensure corrosion-free contact and smooth insertion across hundreds of connection cycles.
  • TRS wiring supports both balanced mono and unbalanced stereo configurations from a single cable.

👎 Cons

  • Right-angle connectors on both ends limit versatility — some gear with recessed jacks may require a straight plug for proper seating.
  • At 6 feet, the fixed length may be too long for tight pedalboard patches or too short for studio runs between a rack and a desk.
  • The cable diameter, driven by the 16 AWG conductors and heavy braid shield, is thicker than slim patch cables, which can crowd a dense pedalboard.
  • No strain relief boots visible on the connectors, which could become a durability concern under heavy road use.

Frequently Asked Questions

Yes. The TRS (tip-ring-sleeve) wiring with two separate conductors and a common shield ground supports both balanced mono and unbalanced stereo configurations, making it suitable for connecting balanced gear like studio monitors, outboard processors, or mixer insert points.
The 90-degree TRS plugs are designed for tight spaces where straight plugs would protrude too far — particularly dense pedalboards, rack-mounted gear, and cramped patch bays. The right-angle profile reduces cable strain and keeps your setup compact.
This cable uses 16 AWG stranded pure copper conductors, which is heavier than the 20–24 AWG found in many patch cables. The thicker gauge reduces resistance over the cable run, helping preserve signal level and low-end integrity across the 6-foot length.
The copper braid shielding provides 97.5% coverage, which is well above the 85–90% typical of budget cables. This level of coverage is effective at rejecting electromagnetic and radio-frequency interference from power adapters, dimmers, and other common noise sources in live and studio environments.
The gold-plated connectors resist corrosion and maintain consistent electrical contact over many insertion cycles. Gold plating is softer than nickel, so it seats smoothly and doesn't degrade the jack contacts on your gear.

Related Products