Brands Guides About
Monoprice 601600 3-Pin DMX Terminator - Black — main product image
Monoprice 601600 3-Pin DMX Terminator - Black
Monoprice 601600 3-Pin DMX Terminator - Black
Monoprice 601600 3-Pin DMX Terminator - Black
Monoprice 601600 3-Pin DMX Terminator - Black
Monoprice

Monoprice 601600 3-Pin DMX Terminator - Black

★★★★★4.6 (205 reviews)

Keep your DMX chain clean and error-free with this rugged 3-pin terminator from Monoprice.

$7.53*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 601600 3-Pin DMX Terminator is a small but essential piece of gear for anyone running DMX-controlled lighting. It plugs into the DMX output of the last fixture in a daisy chain and absorbs the signal with a 120-ohm resistor soldered between pins 2 and 3, preventing reflections that can cause flickering, random color changes, or unresponsive fixtures. While some setups may appear to work without termination, the problems tend to show up at the worst times — longer cable runs and larger fixture counts make proper termination critical.

Built with an anodized aluminum shell and 100% shield coverage on the internal conductors, this terminator is designed for professional use. It resists electromagnetic interference and holds up to the physical demands of live event work, touring rigs, and permanent installations alike. The black finish keeps it visually unobtrusive on stage or in a rack, and the 3-pin XLR connector fits the most common DMX cabling standard.

Key Features

A 120-ohm has been soldered between pins 2 and 3 allowing it to terminate DMX daisy chains

The two shield layers combine to provide 100% shield coverage for the conductors

This cable is designed for accurate transmission of digital audio and DMX lighting control data

Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

Service & Support : You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale.

Specifications

Connector Type
3-Pin XLR
Impedance
120 ohm
Body Material
Anodized Aluminum
Shielding
100% shield coverage
Color
Black
Model
601600

Pros & Cons

👍 Pros

  • Anodized aluminum construction is more durable than plastic-bodied terminators
  • 120-ohm impedance matches the DMX-512 specification for proper signal termination
  • 100% shield coverage prevents electromagnetic interference from corrupting the signal
  • Compact, lightweight design that adds no significant bulk to your cable runs

👎 Cons

  • Only available in a 3-pin configuration, so 5-pin DMX setups require an adapter or different terminator
  • No strain relief or lanyard loop to prevent accidental disconnection on active rigs
  • Single-unit packaging means you need to buy multiples if you run several independent DMX chains

Frequently Asked Questions

Without a terminator, DMX signals can reflect back through the chain, causing flickering lights, erratic fixture behavior, or data errors. The 120-ohm resistor in this terminator absorbs the signal at the end of the line.
No, this is a 3-pin XLR terminator. If your fixtures use 5-pin DMX connectors, you would need a 5-pin terminator or a 3-to-5-pin adapter.
No, it is a passive device. It simply plugs into the last DMX output in your chain and works through an internal 120-ohm resistor soldered between pins 2 and 3.
Yes, the anodized aluminum body is durable and designed to withstand repeated use in live event and touring environments.

Related Products