Neewer

Neewer 10100850 39.4" Motorized Camera Slider Wireless Control

Name: Neewer 10100850 39.4" Motorized Camera Slider Wireless Control
Brand: Neewer
SKU: 10100850

★★★★★4.0 (56 reviews)

2600mAh11lb5.5lb

A 39.4" carbon fiber motorized slider with wireless control for smooth video tracking, time-lapses, and 120° panoramic shots.

Check availability

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Neewer 10100850 is a 39.4-inch (100 cm) motorized camera slider built around a carbon fiber and aluminum alloy frame with four roller bearings for smooth, shake-free travel. Its ultra-silent stepper motor driver provides precise positioning while keeping operational noise to a minimum — an important consideration for video shoots where audio is being captured simultaneously. The 2.4G wireless remote control lets you define start and end points, after which the slider automatically runs back and forth at a constant speed for video or at programmable intervals for time-lapse sequences. Adjustable red knobs on each end of the carriage switch between horizontal tracking, standard tracking, and 120° panoramic shooting modes, giving you a range of dynamic angles from a single piece of equipment.

Power comes from an included 2600mAh NP-F550 rechargeable battery with a USB charger, or you can connect a USB power bank rated at 5V/2A for extended shooting sessions. The slider handles up to 11 lb (5 kg) horizontally and 5.5 lb (2.5 kg) at a 45° tilt, accommodating most mirrorless and DSLR setups. Standard 1/4-inch and 3/8-inch threaded holes on the bottom and sides allow secure tripod mounting. The kit ships with a ball head, hex key, mounting screw, and six shutter release cables for Canon, Nikon, Sony, Samsung, and Pentax cameras, making it a comprehensive package for filmmakers and photographers who want to add motorized motion to their work without assembling components from multiple vendors.

Key Features

【Lightweight & Balanced Design】 This 100cm motorized camera slider is made of carbon fiber and aluminum alloy with 4 roller bearings with balanced operation which are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 1/4” and 3/8” threaded holes for mounting on a tripod.

【Supports Multiple Shooting Modes】 It can achieve multi-angle shooting effects via adjusting the red knobs on both sides of the camera slider to capture horizontal, tracking, and 120° panoramic shots. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120° panoramas, and resume both knobs to their middle positions for horizontal shots. (Note：For faster running speeds, please upgrade the motor program)

【Ultra-Silent Stepper Motor Driver & Power Options】 Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. One rechargeable 2600mAh NP-F550 lithium-ion replacement batteries and a USB battery charger are included to power the remote control and motor. Or use a USB power bank (with 5V 2A output, Not included) as the power source to power them

【Complete Functions】 With 2.4G Wireless remote Control, this camera slider automatically goes back and forth by setting the start point and end point. Supports video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb/5kg when shooting horizontally; when the slider is tilted at 45°, the maximum load capacity becomes 5.5lb/2.5kg

【Camera Slider Kit】 (1) Motorized Camera Slider, (1) 2.4G Wireless remote control, (1) NP-F550 replacement batteries, (1) USB battery charger, (1) Ball head, (1) Hex key, (1) Screw, (6) Shutter release cables (C1, C3, N1, N3, S1, S2). Compatible with Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras and most camcorders and miniature cameras. Other camera models require an additional shutter release cable (not included)

Specifications

Brand

Neewer

Model

10100850

Slider Length

39.4 inches / 100 cm

Material

Carbon Fiber, Aluminum Alloy

Motor Type

Ultra-silent stepper motor

Remote Control

2.4G Wireless

Shooting Modes

Video, Time-lapse, 120° Panoramic, Horizontal Tracking

Max Load (Horizontal)

11 lb / 5 kg

Max Load (45° Tilt)

5.5 lb / 2.5 kg

Battery

NP-F550, 2600mAh (included)

Alternate Power

USB power bank (5V/2A, not included)

Mounting Threads

1/4" and 3/8" (bottom and sides)

Compatible Brands

Canon, Nikon, Sony, Panasonic, Samsung, Pentax

Pros & Cons

👍 Pros

Carbon fiber and aluminum alloy construction keeps the slider lightweight yet rigid
Ultra-silent stepper motor allows use during live audio recording
Wireless 2.4G remote enables start/end point programming without touching the slider
Supports video, time-lapse, and 120° panoramic shooting modes from a single unit
Includes NP-F550 battery, charger, ball head, and six shutter cables for a complete kit

👎 Cons

Load capacity drops to 5.5 lb when the slider is tilted, limiting use with heavier camera rigs at angles
At 39.4 inches, the slider is bulky to transport and may not fit in standard camera bags
Firmware update may be needed to unlock faster motor speeds, adding an extra setup step
Wireless remote uses a small screen that can be difficult to read in bright sunlight
Ball head included in the kit is basic and may need upgrading for heavier or larger cameras

Frequently Asked Questions

How loud is the motor during operation?

The slider uses an ultra-silent stepper motor driver designed to minimize noise during recording. It is quiet enough for most video shoots, though extremely close microphone placement may still pick up faint motor sound.

What is the maximum weight this slider can support?

It supports up to 11 lb (5 kg) when positioned horizontally. When tilted to 45°, the maximum load capacity drops to 5.5 lb (2.5 kg).

Which camera brands are compatible with the included shutter release cables?

The kit includes six shutter release cables covering Canon (C1, C3), Nikon (N1, N3), Sony (S1), and Samsung/Pentax (S2). Other camera models may require an additional cable purchased separately.

How is the slider powered?

It comes with a rechargeable 2600mAh NP-F550 battery and USB charger. You can also power it from a USB power bank with at least 5V/2A output.

Can I set automatic back-and-forth movement?

Yes. Using the 2.4G wireless remote, you set a start point and end point, and the slider will automatically travel back and forth between them at your chosen speed.