Brands Guides About
Nikon 1 NIKKOR VR 10-30mm Aperture and VR Flex Cable Repair Part — main product image
Nikon 1 NIKKOR VR 10-30mm Aperture and VR Flex Cable Repair Part
Nikon 1 NIKKOR VR 10-30mm Aperture and VR Flex Cable Repair Part
Nikon 1 NIKKOR VR 10-30mm Aperture and VR Flex Cable Repair Part
Generic

Nikon 1 NIKKOR VR 10-30mm Aperture and VR Flex Cable Repair Part

Restore both aperture control and image stabilization in a 1 NIKKOR VR 10-30mm lens by replacing a single torn internal flex cable

$44.18*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Aug 03, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

This replacement flex cable is a focused repair part for one job: restoring the internal aperture and image stabilizer functions of a 1 NIKKOR VR 10-30mm lens. When the original cable tears, wears, or stops transmitting signals, the aperture may stop responding or stabilization may fail, even though the optics remain fine. Rather than buying a whole new lens, this part lets a repairer address the specific fault. It is aimed squarely at technicians and hands-on enthusiasts who are diagnosing an internal flex cable problem during a teardown.

What sets this part apart is that it covers two functions at once, connecting the aperture and image stabilizer sections within the lens through a single component. Compatibility is listed for the 1 NIKKOR VR 10-30mm f/3.5-5.6 and PD-ZOOM lens models, so matching the exact model and cable position is essential before ordering. Installation is not casual work. It means opening the lens assembly, routing the cable correctly, and reassembling with care. For the right owner, though, it turns a dead aperture or a failed stabilizer into a solvable, part-level repair.

Key Features

Lens aperture and image stabilizer flex cable repair part to restore internal lens functions on the listed 10-30mm and PD-ZOOM lens models.

Made for lens repair work where the flex cable is torn, worn, or no longer transmitting the needed signals inside the lens assembly.

Covers two key lens functions in one part by connecting the aperture and image stabilizer sections within the compatible lens structure.

Matches 1 NIKKOR VR 10-30mm f/3.5-5.6 and PD-ZOOM lens listings; compare the exact lens model and cable position before ordering.

Useful for maintenance or parts replacement during lens disassembly when targeting an internal flex cable fault rather than changing the full lens assembly.

Specifications

Part Type
Aperture and image stabilizer flex cable
Brand
Generic
Functions Covered
Aperture and image stabilizer
Compatible Lens
1 NIKKOR VR 10-30mm f/3.5-5.6
Also Compatible
PD-ZOOM lens models
Intended Use
Internal lens repair and parts replacement
Installation
Requires lens disassembly
Addresses
Torn, worn, or non-transmitting flex cable

Frequently Asked Questions

It restores the aperture and image stabilizer functions by carrying the signals those sections need. It is meant for cases where the original cable is torn, worn, or no longer transmitting.
It is listed for the 1 NIKKOR VR 10-30mm f/3.5-5.6 and PD-ZOOM lens models. Compare your exact lens model and the cable position before ordering to confirm the match.
It requires opening the lens assembly and positioning the cable correctly, so it is best suited to technicians or experienced hobbyists comfortable with lens disassembly rather than first-time repairers.
No. It specifically addresses an internal aperture and image stabilizer flex cable fault. Other failures within the lens would not be resolved by this part.
It is listed under the Generic brand as a compatible repair part rather than a Nikon original. Confirm the exact lens model and cable position to ensure it matches your assembly.
If the fault is limited to this flex cable, a targeted replacement can restore aperture control and stabilization at part level, avoiding the cost of swapping the entire optical assembly.

Related Products