Brands Guides About
Peavey TransTube 03376410 Special 212 Guitar Amplifier Footswitch — main product image
Peavey

Peavey TransTube 03376410 Special 212 Guitar Amplifier Footswitch

★★★★★3.7 (28 reviews)

Instant channel and effects switching at your feet — the Peavey TransTube 03376410 footswitch puts amp control where it belongs during a live set.

$57.29*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jun 04, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

Halfway through a set, when you need to move from a clean rhythm part to the amp's UltraLead channel without walking back to the head, the Peavey 03376410 footswitch is doing exactly the job it was designed for. The three-button layout maps directly to the TransTube Special 212 and its platform siblings — UltraLead for the saturated high-gain voice, Bypass Clean for the uncolored clean channel, and Select Effects for the onboard effects loop. Channel transitions are controlled through the amp's own switching circuitry via the 7-pin DIN link, which means the response is immediate and the switching is handled by the same electronics that define each channel's character. The LED indicators confirm your active state clearly, which matters when stage lighting is unpredictable and you can't trust a quick glance at the amp head.

The 7-pin DIN connection does more than carry a simple on/off signal — it handles multiple control lines and returns LED power back to the footswitch, all in a single 15-foot cable run. That architecture is what eliminates the battery compartment and keeps the footswitch passive-fail resistant. The housing is straightforward black construction without the reinforced metal chassis of boutique pedalboard controllers, but for a dedicated amp footswitch that lives at the end of its cable rather than being stomped constantly in a chain, it's functional for regular gigging use. Keep the DIN connector clean and avoid sharp kinks in the cable near the connectors — the DIN jack is the most vulnerable point in the signal chain over years of use.

Key Features

7-pin DIN with LEDs, UltraLead, Bypass Clean, Select Effects

Three buttons

Use with TransTube Special 212, Revolution 112, Special 212 II, Revolution 112 II and XXL

15' 7 Pin Din cable

Specifications

Brand
Peavey
Model
03376410
Number of Buttons
3 (UltraLead, Bypass Clean, Select Effects)
Connector
7-pin DIN
LED Indicators
Yes (amp-powered via DIN connection)
Cable Length
15 ft
Compatible Amplifiers
TransTube Special 212, Revolution 112, Special 212 II, Revolution 112 II, XXL
Color
Black

Pros & Cons

👍 Pros

  • The 7-pin DIN connection carries both control signals and LED power in a single cable, eliminating the battery dependency and dim-LED frustrations of passive footswitches.
  • Three dedicated buttons for UltraLead, Bypass Clean, and Select Effects give you instant access to the amp's core tonal functions without menu-diving or tap-dancing between channels.
  • LED status indicators confirm active channel and effects state at a glance from the floor — essential in stage lighting where you can't always see the amp's own indicators.
  • 15-foot cable provides adequate stage reach for most setups without the latency or signal degradation concerns of longer passive cable runs.
  • Genuine Peavey OEM hardware means connector fit, pin configuration, and control logic are exactly matched to the intended amplifiers.

👎 Cons

  • Compatibility is hard-locked to five specific Peavey amplifier models — the 7-pin DIN connector makes this footswitch useless with any other amp, including other Peavey series.
  • The cable is not user-detachable at the footswitch end on most units — a damaged cable near the footswitch housing requires professional repair rather than a simple swap.
  • Three buttons cover the amp's main functions, but there is no dedicated reverb or EQ bypass switch, which limits tonal flexibility mid-set compared to more comprehensive multi-button controllers.
  • The footswitch housing is basic in construction — gigging musicians who subject gear to heavy stage use may find the chassis less robust than purpose-built boutique alternatives.
  • No MIDI integration — channel switching is hardwired analog, with no option to sync to a MIDI pedalboard or looper for automated switching.

Frequently Asked Questions

This unit is engineered for the Peavey TransTube Special 212, Revolution 112, Special 212 II, Revolution 112 II, and XXL amplifiers. The 7-pin DIN connector is proprietary to those Peavey models — it will not function with amplifiers using standard 1/4" TRS footswitch jacks or different DIN configurations.
The three buttons are labeled UltraLead, Bypass Clean, and Select Effects. UltraLead engages the amp's high-gain lead channel; Bypass Clean switches to the clean channel; Select Effects toggles the amp's onboard effects loop. The LED indicators on the footswitch show which state is active at a glance from the stage floor.
The included cable is 15 feet of 7-pin DIN, which is sufficient for most stage setups where the amp is behind or beside the performer. The cable is attached via the 7-pin DIN connector — a replacement 7-pin DIN cable can be sourced if the original is damaged, but confirm the pin configuration matches the Peavey spec before substituting.
The LEDs are powered through the 7-pin DIN connection from the amplifier itself — no batteries or external power supply required. The amp provides the necessary voltage through the dedicated footswitch port.
No — compatibility is specific to the listed TransTube and Revolution/XXL series. Newer Peavey amplifiers, even those with outwardly similar footswitch jacks, may use different pin assignments or control logic. Use only with the confirmed compatible models to avoid amp damage or non-function.

Related Products