Shure

Shure UA8-500-560 Instrument Condenser Microphone Antenna

4.6 (3 reviews)
Condenser

A 1/2 wave omnidirectional antenna for the Shure P9T transmitter, tuned for reliable coverage in the 500–560 MHz band.

$33.95*
Check availability

*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Shure UA8-500-560 is a 1/2 wave omnidirectional antenna engineered for the Shure P9T personal monitor transmitter, the transmission component of Shure's PSM 900 in-ear monitoring system. Operating within the 500–560 MHz UHF frequency range, this antenna replaces the standard 1/4 wave antenna that ships with the P9T, providing improved signal strength and more consistent coverage across performance venues. Its omnidirectional radiation pattern sends signal equally in every direction around the antenna's axis, which is particularly beneficial in multi-performer stage setups where receivers are positioned at varying angles relative to the transmitter rack.

The antenna connects to the P9T via a standard BNC connector, making installation straightforward with no additional hardware required. At just over 2 ounces and 14 inches in length, it adds minimal weight to a rack setup but does extend outward more than a stock antenna, which is worth considering in tightly packed equipment racks. The UA8-500-560 is manufactured by Shure to their own specifications, ensuring impedance matching and frequency tuning are optimized for the P9T's output characteristics. For touring productions, houses of worship, theaters, and any venue relying on wireless in-ear monitors, upgrading to a properly matched 1/2 wave antenna is one of the most effective ways to improve transmission reliability without adding complexity to the signal chain.

Key Features

1/2 Wave Omnidirectional Antenna for P9T

Transmitter, (500 560 MHz)

With a history of audio innovation that began in 1925

Shure continues to set the worldwide industry standard for audio electronics

Legendary microphones. Cutting-edge wireless systems

Specifications

Antenna Type
1/2 Wave Omnidirectional
Frequency Range
500–560 MHz
Compatibility
Shure P9T Transmitter (PSM 900)
Connector
BNC
Dimensions
14 x 3.4 x 1.6 inches
Weight
2.04 ounces
Brand
Shure
Model
UA8-500-560

Pros & Cons

👍 Pros

  • 1/2 wave design provides extended range over standard 1/4 wave antennas
  • Omnidirectional radiation pattern delivers even coverage in all directions
  • Lightweight at just over 2 ounces, adding minimal weight to rack setups
  • BNC connector attaches directly to the P9T without adapters
  • Shure-manufactured for guaranteed compatibility with PSM 900 systems

👎 Cons

  • Only covers the 500–560 MHz band, requiring a different model for other frequency blocks
  • At 14 inches long, it protrudes significantly from rack-mounted transmitters
  • Only compatible with the Shure P9T transmitter, not other Shure wireless products
  • Premium price compared to third-party BNC antennas covering the same frequency range
  • Does not include any mounting bracket or right-angle adapter for tight rack spaces

Frequently Asked Questions

The UA8-500-560 is specifically designed for the Shure P9T personal monitor transmitter used in PSM 900 in-ear monitor systems.
It operates within the 500–560 MHz UHF band. It will not function correctly with transmitters operating outside this range, so confirm your system's frequency block before purchasing.
A 1/2 wave design provides a stronger, more consistent signal compared to the shorter 1/4 wave antennas that ship with many transmitters. The omnidirectional pattern radiates signal equally in all directions around the antenna, rather than favoring one direction.
No. This antenna is a transmit antenna designed for the P9T transmitter's BNC connector. Wireless microphone receivers use receive antennas, which serve a different function in the signal chain.
It connects via a standard BNC connector that threads onto the P9T transmitter's antenna port. No adapters or tools are required for installation.