
Tascam
Tascam TM-10LWH White Lavalier Microphone
★★★★★
Tascam's omnidirectional lavalier locks onto the DR-10L with a screw-down connector and delivers clean, consistent speech capture up to 115dB SPL for broadcast and field production.
$79.00*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Secure connection with screw-down connector
Windscreen and clip included
Microphone sensitivity: -42dBv/PA, maximum SPL: 115dB SPL
Omnidirectional lavalier microphone
Cable Length: 160cm
Specifications
Brand
Tascam
Model
TM-10LWH
Color
White
Polar Pattern
Omnidirectional
Sensitivity
-42dBV/Pa
Maximum SPL
115dB SPL
Cable Length
160cm (~63 inches)
Connector
Screw-down locking (Sennheiser style)
Included Accessories
Windscreen, Clip
Pros & Cons
👍 Pros
- Screw-down locking connector eliminates accidental disconnection during movement — a critical reliability feature in field recording and live broadcast where a popped cable means lost audio.
- 115dB SPL maximum input level provides substantial headroom above typical speech levels, handling raised voices and unexpected loud sources without distortion.
- Omnidirectional polar pattern delivers consistent frequency response regardless of head movement or slight clip repositioning — speech intelligibility stays stable as the subject moves.
- White capsule finish is designed for low visual profile against light-colored clothing and broadcast talent wardrobe requirements.
- Included windscreen and clip provide immediate deployment without additional accessory purchases for standard interview scenarios.
👎 Cons
- At -42dBV/Pa sensitivity, the TM-10LWH sits on the lower end of lavalier sensitivity — in environments with significant ambient noise, the preamp gain required may raise the noise floor of the recording chain more than higher-sensitivity alternatives.
- 160cm cable length, while adequate for most lapel-to-bodypack runs, leaves no margin for non-standard placements or longer clothing routes without an extension cable.
- Omnidirectional pattern provides no ambient noise rejection — in genuinely noisy environments, a directional lavalier or boom microphone will outperform it on source isolation.
- Designed specifically as a DR-10L accessory, which narrows its utility as a cross-platform lavalier for engineers who use multiple recorder brands.
- Self-noise specification is not published, making precise noise floor comparisons with competing lavaliers difficult at the specification stage.
Frequently Asked Questions
Is the TM-10LWH exclusively compatible with the Tascam DR-10L, or will it work with other recorders and interfaces?
The TM-10LWH uses a screw-down connector in Sennheiser style — this is a locking 3.5mm format designed primarily for the DR-10L bodypack recorder. It will physically connect to other devices using the same connector standard, but primary design intent and optimization is for the DR-10L. Using it with a standard 3.5mm input requires verifying connector compatibility.
What is the self-noise floor of the TM-10LWH, and does it require bias voltage or phantom power?
Specific self-noise (EIN) figures are not published in the available specifications. The TM-10LWH is a lavalier condenser designed to operate on the plug-in power (bias voltage) supplied by the DR-10L and compatible recorders — not 48V phantom power. Standard lavalier self-noise at this sensitivity tier (-42dBV/Pa) is typically in the 25–35dB SPL range, appropriate for close-mic speech capture.
Does the omnidirectional polar pattern cause rejection problems in noisy interview environments?
Omnidirectional patterns capture sound from all directions by design, which means they do not reject room noise or ambient sources the way a cardioid would. However, at lavalier placement distance (chest or lapel), the proximity advantage over ambient sources is significant. In controlled interview settings and field production, the omni pattern's immunity to handling noise and its consistent off-axis response are practical advantages over directional lavs.
At -42dBV/Pa sensitivity, how much gain is required from the DR-10L preamp?
-42dBV/Pa is a moderate-sensitivity spec for a lavalier — you'll typically dial in 40–50dB of gain on the DR-10L for normal speech levels, keeping headroom before the 115dB SPL ceiling. This leaves substantial room before clipping even in unexpectedly loud environments like crowd noise or raised voices.
Is the 160cm cable length sufficient for most broadcast and ENG clip placement?
160cm (approximately 63 inches) is adequate for lapel-to-bodypack distances in standard broadcast interview setups — the cable routes under clothing from a chest-level clip to a belt-worn DR-10L without being overly slack. For unusual body geometries or theatrical blocking with significant movement, verify the run length before committing.