Tether Tools
Tether Tools StrapMoore 3-Pack Accessory Mount
★★★★★
Stop hunting for your power brick mid-shoot — the Tether Tools StrapMoore keeps it locked to your stand, exactly where you need it.
$56.99*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Protect valuable power bricks and cables by securing them to your C-Stand, tripod or light stand
Keep important items close at hand and secure
Internal GripperElastic prevents slipping
Strong hook-and-loop fasteners allow for a secure hold and quick release
Compact and portable taking up almost no space in your bag or by leaving it secured to your stand
Specifications
Brand
Tether Tools
Model
StrapMoore
Quantity
3 Pack
Attachment
Hook-and-Loop Fasteners
Interior Lining
GripperElastic
Compatible Supports
C-Stands, Tripods, Light Stands
Ideal For
Power Bricks, Cables, Chargers, Accessories
Pros & Cons
👍 Pros
- Keeping a power brick strapped to the stand leg instead of resting on the floor eliminates the tripping hazard cable run and reduces the chance of accidentally kicking the adapter during a shoot.
- The GripperElastic lining holds accessories securely through stand movement and repositioning, which matters when you're adjusting lights quickly on a busy set without wanting to check that the brick is still seated.
- Hook-and-loop fasteners provide genuinely fast attachment and release — swapping out accessories between setups takes seconds rather than the tool-dependent process of some cable management solutions.
- The compact, lightweight design means StrapMoores live on the stand permanently without adding any meaningful weight or bulk to your kit.
- Three units per pack provides enough coverage for a standard three-light portrait setup without needing to order separately for each stand.
👎 Cons
- No published weight capacity means photographers need to exercise judgment on heavier accessories — using it for anything significantly heavier than a standard power brick is an untested application.
- The hook-and-loop fastener, while fast, accumulates lint, sawdust, and debris over time in location shooting environments, gradually reducing grip strength if not cleaned periodically.
- The StrapMoore is designed for Tether Tools' own ecosystem use case — powering tethered shooting setups — so photographers with non-standard cable management needs may find the form factor doesn't suit every workflow.
- Grip strength of the GripperElastic lining depends on the surface of the accessory being held — very smooth or tapered power bricks may seat less securely than rectangular ones.
- The strap system relies on adequate stand tube clearance to close fully — on stands with large leg spread attachments or bulky collars, the strap may not cinch as tightly as on bare tube sections.
Frequently Asked Questions
What types of gear can the StrapMoore actually hold, and is there a weight limit?
The StrapMoore is designed to hold power bricks, chargers, cables, and similar accessories that can be strapped to a cylindrical stand or support. Tether Tools does not publish a specific weight rating — it is optimized for lightweight accessories like power adapters and battery packs rather than heavy equipment, so it's best evaluated for standard power supply items rather than heavy gear.
Will the StrapMoore fit on any stand diameter, or are there size restrictions?
The adjustable hook-and-loop straps accommodate a range of stand tube diameters including typical C-stand, tripod, and light stand tubing. The adjustability is the key feature — it wraps around the stand and cinches to fit rather than relying on a fixed clamp size.
How does the GripperElastic lining prevent accessories from slipping out?
The interior of the StrapMoore is lined with GripperElastic material that grips the surface of whatever is placed inside it. This prevents power bricks and adapters — which tend to be smooth-sided — from sliding out when the stand is moved, tilted, or bumped during a shoot.
Can the StrapMoore stay attached to the stand between shoots, or does it need to be removed each time?
It can stay attached permanently — the hook-and-loop design is made for repeated cycles of attachment and removal, but there is no reason it cannot remain on the stand between sessions. Many photographers leave it in place and simply swap out the accessory being held.
Is the 3-pack intended for three separate stands, or are multiple units used on a single stand?
Either configuration is practical. Most photographers use each StrapMoore on a separate stand — one for the key light stand, one for the fill, one for a background stand. But you could mount two on a single heavy-duty stand if you need to organize multiple accessories at one location.
Related Products
