American Audio
American Audio VLP300 Power Amplifier
★★★★★
150W100W300W20Hz - 20kHz20Hz-20KHz
Reliable Power Amplification for Your Audio SetupThe American Audio VLP300 Amplifier delivers robust power and clean sound reproduction, making it an ideal choice for various audio applications. Its versatile features and rugged design ensure reliable performance. Specifications Output Power: 1...
Check availability
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Reliable Power Amplification for Your Audio Setup
The American Audio VLP300 Amplifier delivers robust power and clean sound reproduction, making it an ideal choice for various audio applications. Its versatile features and rugged design ensure reliable performance.
Specifications
- Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- (Bridge Mode, Mono): 300W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per use
- Damping Factor @ 8 Ohm: 260
- Impedance: 20K Ohms balanced / 10K Ohms unbalanced
- Cooling System: 2 Individual Fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift
- Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)
- Weight: 24 lbs. / 11Kgs
Key Features
300 Watts
Daul Fans
Compact Design
Front LED Meters
Compact Design
Front LED Meters
Compact Design; Daul Fans
300 Watts power
Daul Fans, Compact Design, Front LED Meters
Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono)
300W RMS @ 8 Ohms, 1K Hz, 1% THD
Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
Frequency response: (+ or -01db, @rated output Power, 8 Ohms): 20Hz-20KHz
Damping Factor @ 8 ohm: 260; Slew Rate: 15V per usec
Impedance: 20 Ohms balanced / 10 Ohms unbalanced
Cooling system: 2 individual fans
High/low pass filter; Input sensitivity selector ; Ground lift
Dimensions: 13-1/4"L x 19"W x 1-3/4"H
Specifications
Brand
American Audio
Model
VLP300
Output Power (Stereo @ 4 Ohms)
150W RMS Per Channel
Output Power (Stereo @ 8 Ohms)
100W RMS Per Channel
Output Power (Bridge Mode, Mono @ 8 Ohms)
300W RMS
Total Harmonic Distortion
Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
Frequency Response
(+ or -0.1db, @rated output Power, 8 Ohms): 20Hz-20KHz
Damping Factor @ 8 Ohm
260
Slew Rate
15V per usec
Input Impedance
20 Ohms balanced / 10 Ohms unbalanced
Cooling System
2 individual fans
Special Features
High/low pass filter, Input sensitivity selector, Ground lift, Front LED Meters
Dimensions
13-1/4"L x 19"W x 1-3/4"H
Pros & Cons
👍 Pros
- Offers 300 Watts of total power in Bridge Mode (Mono) at 8 Ohms, suitable for driving various speaker setups.
- Features a compact design with dimensions of 13-1/4"L x 19"W x 1-3/4"H, making it easy to integrate into existing racks.
- Equipped with dual fans for efficient cooling, helping to maintain optimal performance during extended use.
- Includes front LED meters, providing visual feedback on signal levels for monitoring.
- Features high/low pass filters and an input sensitivity selector for enhanced audio control and customization.
- Offers a ground lift switch, which can help eliminate hum and noise caused by ground loops in audio systems.
👎 Cons
- At 100W RMS per channel at 8 Ohms, the stereo output power might be considered modest for larger venues or high-demand setups.
- The specified Damping Factor of 260 at 8 ohms is a solid figure, but not the highest available in its category.
- With only two individual fans, very long, high-output operations could still test the limits of its cooling system.
- The total harmonic distortion (Less Than 0.1% 20Hz - 20kHz @ 8 Ohms) indicates good audio quality, but some premium amplifiers offer lower distortion.
- The impedance specifications are fixed at 20 Ohms balanced / 10 Ohms unbalanced, requiring compatible input sources.
Frequently Asked Questions
What is the maximum output power of the American Audio VLP300 amplifier?
The American Audio VLP300 Power Amplifier can deliver 300W RMS when operated in Bridge Mode (Mono) at 8 Ohms.
How many watts does this amplifier provide per channel in stereo mode?
In stereo mode, the amplifier provides 150W RMS per channel at 4 Ohms, or 100W RMS per channel at 8 Ohms.
What cooling features does the VLP300 amplifier include?
The amplifier is equipped with two individual fans, designed to provide effective cooling during operation.
Does the American Audio VLP300 offer any controls for audio shaping?
Yes, it includes both high/low pass filters and an input sensitivity selector, allowing for adjustments to the audio output.
Are there any visual indicators on the front of the amplifier?
Yes, the VLP300 features front LED meters that provide visual feedback on the audio signal levels.
What are the physical dimensions of this power amplifier?
The dimensions of the American Audio VLP300 are 13-1/4"L x 19"W x 1-3/4"H, indicating a compact and rack-mountable design.
Related Products
