Gravity

Gravity 6000.1D Car Amplifier 6000W Monoblock Class D

3.9 (4 reviews)
16.9 in8.3 in2.5 in6000W

Gravity 6000.1D monoblock Class D amplifier delivers 6000W max power with bass boost control for thunderous car audio bass.

$299.99*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jun 04, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Gravity 6000.1D is a monoblock Class D car amplifier engineered for subwoofer duty, rated at a maximum of 6000 watts at 1 Ohm. Its Class D topology delivers high power output with greater efficiency and less heat generation than traditional Class AB designs, which is critical when pushing demanding subwoofer loads in an enclosed vehicle environment. The amplifier is also stable at 2 Ohm and 4 Ohm, giving you flexibility in how you wire single or multiple subwoofers. A MOSFET power supply underpins the output stage for responsive, reliable power delivery.

Tuning controls are comprehensive for this price range. The variable low pass filter adjusts from 40 Hz to 180 Hz so you can set a clean crossover point, while the subsonic filter (0–50 Hz) protects ported subwoofers from damaging ultra-low frequencies. Bass boost is adjustable from 0 to 12 dB for added impact when desired. Both high-level and low-level inputs are provided, ensuring compatibility whether your head unit has RCA pre-outs or only speaker-level outputs. The included 2nd-generation bass knob lets you make real-time adjustments from the driver's seat. At 431.5 x 211 x 64.5 mm, it is reasonably compact for its power class, though you will want to measure your intended mounting location carefully.

Key Features

6000W Max Class D @ 1 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included (2nd Generation)

S/N Ratio > 70 dB with Frequency Response at 8 Hz ~ 180 Hz and THD < 0.2%

Bass Boost Level 0 ~ 12 dB with LPF 40 Hz ~ 180 Hz and Subsonic Filter 0 ~ 50 Hz

High and Low Level Inputs, Variable Low Pass Crossover, Variable Bass Boost

Dimension ( L×W×H ): 431.5 mm (16.9 in) × 211 mm (8.3 in) × 64.5 mm (2.5 in)

Specifications

Brand
Gravity
Model
6000.1D
Amplifier Class
Class D
Max Power
6000W @ 1 Ohm
Impedance Stability
1 Ohm, 2 Ohm, 4 Ohm
S/N Ratio
&gt; 70 dB
Frequency Response
8 Hz – 180 Hz
THD
&lt; 0.2%
Bass Boost
0 – 12 dB
Low Pass Filter (LPF)
40 Hz – 180 Hz
Subsonic Filter
0 – 50 Hz
Inputs
High-Level and Low-Level
Crossover
Variable Low Pass
Bass Knob
Included (2nd Generation)
Dimensions (L x W x H)
431.5 x 211 x 64.5 mm (16.9 x 8.3 x 2.5 in)

Pros & Cons

👍 Pros

  • 1 Ohm stable design delivers maximum power output for demanding subwoofer configurations
  • Included bass knob provides convenient in-cabin bass level adjustment
  • Variable low pass crossover and subsonic filter allow precise tuning to your subwoofer
  • Accepts both high-level and low-level inputs for broad head unit compatibility
  • Compact 2.5-inch profile height allows installation in tight spaces

👎 Cons

  • 6000W max power rating is a peak figure and continuous RMS output will be substantially lower
  • Large 16.9-inch length requires careful planning for trunk or under-seat mounting
  • May require upgraded electrical system (alternator, battery, wiring) to deliver full power reliably
  • Signal-to-noise ratio of 70 dB is modest compared to higher-end amplifiers

Frequently Asked Questions

The Gravity 6000.1D is stable at 1 Ohm, 2 Ohm, and 4 Ohm, with its maximum 6000W output rated at 1 Ohm.
Yes, a 2nd-generation bass knob is included, allowing you to adjust bass levels from the driver's seat.
The variable low pass filter (LPF) is adjustable from 40 Hz to 180 Hz, letting you set the crossover point to match your subwoofer setup.
Yes, it features both high-level (speaker-level) and low-level (RCA) inputs for compatibility with a wide range of head units.
It measures 431.5 x 211 x 64.5 mm (16.9 x 8.3 x 2.5 inches), so you should verify it fits your intended mounting location before purchasing.