Brands Guides About
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC CS-DR162(2PRS)+Magnet DR Series 6.5
JVC

JVC CS-DR162(2PRS)+Magnet DR Series 6.5" Coaxial Speakers

★★★★★4.2 (17 reviews)
4lbs3lbs8oz

Upgrade your factory car audio to punchy, clear sound with four JVC 6.5-inch coaxial speakers and a bonus phone mount.

$55.00*
Check availability

*Price sourced from Amazon.com. Last updated:Jun 04, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

If your factory speakers sound flat, muddy, or lack any real low-end presence, the JVC CS-DR162 bundle is a straightforward solution that addresses both the front and rear channels at once. The 2-way coaxial design pairs a 6.5-inch woofer with an integrated tweeter in a single unit, and the 50-watt RMS handling means these work without an amplifier — plug them into your existing head unit and the improvement over OEM speakers is immediate. The 4-ohm impedance is standard for aftermarket car audio and compatible with virtually every factory and aftermarket receiver on the market.

What sets these apart from generic replacement speakers is the reduced mounting depth of 44mm — a practical engineering detail that dramatically expands vehicle compatibility. Many cars, trucks, and SUVs have shallow door cavities that reject standard aftermarket speakers, and this shorter profile solves that without cutting or shimming. The full-cover grille snaps on for protection or comes off for a cleaner look, and the two-pair bundle means you're outfitting the entire car in one transaction. The included gravity phone magnet mount is a nice convenience add-on, though the speaker performance is the real value proposition here.

Key Features

6 5" 2-Way Coaxial car speakers (4 speakers) + gravity phone magnet holder

Power handling RMS 50 watts peak 300 watts Impedance 4 ohms

Great factory replacement - installable vehicle types are greatly increased thanks to its shorter height

Full cover grill design - protects the woofer and tweeter in open installations

Dimensions weight (w/ grille) 0 64kg (1 4lbs) weight (w/o grille) 0 57kg (1 3lbs) magnet mass 220G (7 8oz) mounting depth 44 mm (1-3/4")

Specifications

Speaker Type
2-Way Coaxial
Speaker Size
6.5"
RMS Power
50 Watts
Peak Power
300 Watts
Impedance
4 Ohms
Quantity
4 Speakers (2 Pairs)
Mounting Depth
44mm (1-3/4")
Weight (with grille)
0.64 kg (1.4 lbs)
Weight (without grille)
0.57 kg (1.3 lbs)
Magnet Mass
220g (7.8 oz)
Includes
4 speakers + gravity phone magnet holder

Pros & Cons

👍 Pros

  • The shallow 44mm mounting depth makes these speakers compatible with a wider range of vehicles than most aftermarket 6.5-inch options, including cars with tight door cavities.
  • Four speakers in one purchase means you can upgrade both front and rear channels simultaneously without mixing speaker brands or sound signatures.
  • The full-cover grille design protects the woofer cone and tweeter in open-baffle door installations where exposed speakers are vulnerable to debris.
  • At 50 watts RMS, these speakers extract noticeably more dynamic range from a factory head unit than typical OEM paper-cone speakers — bass feels tighter and vocals cleaner.
  • The included gravity phone magnet holder adds practical everyday value without requiring a separate purchase or additional mounting hardware.

👎 Cons

  • At 300 watts peak, the CS-DR162 is not designed for high-powered amplified systems — dedicated audio enthusiasts running 75+ watts RMS per channel will need higher-rated speakers.
  • The grille design, while protective, can slightly color the high-frequency response in open-baffle installations compared to grille-free setups.
  • These are 2-way coaxial speakers, not component sets — tweeter placement is fixed at the center of the woofer, which limits the soundstage imaging that component setups can achieve.
  • The included phone magnet mount uses a generic gravity-grip mechanism that may not fit oversized phone cases or accommodate all dashboard vent sizes.
  • No included wiring harness or adapter — you'll need vehicle-specific connectors separately if you want a clean plug-and-play installation without splicing.

Frequently Asked Questions

In most cases, yes — the CS-DR162 is specifically engineered with a shorter mounting depth (44mm / 1-3/4 inches) than typical aftermarket speakers, which dramatically increases the number of vehicles they fit without cutting or modification. Check your car's mounting depth spec before ordering to confirm.
The CS-DR162 handles 50 watts RMS, which is well within the range of most factory and aftermarket head units. The 300-watt peak rating applies to short transient bursts, not continuous power — driving these with a standard 20-30 watt RMS factory deck will still produce noticeably better sound than most OEM speakers.
No — at 4-ohm impedance and 50 watts RMS sensitivity, these are designed to run efficiently off a head unit's built-in amplifier. An external amp will improve dynamics and headroom, but these speakers deliver a solid upgrade even without one.
The bundle includes two pairs (4 total) of the CS-DR162 speakers plus a gravity-style phone magnet holder. The phone mount is a bonus add-on — the speakers are the primary product and come with full-cover protective grilles.
Yes, the grilles are removable. Mounting depth without grille is approximately 44mm (1-3/4 inches). With grille, speaker weight is 0.64kg (1.4 lbs) per unit.

Related Products