Brands Guides About
Monoprice 612651 Hologram 3D Display Protective Cover — main product image
Monoprice

Monoprice 612651 Hologram 3D Display Protective Cover

★★★★★5.0 (1 reviews)

Purpose-built protective cover for the Stage Right hologram 3D display, preventing tampering and contact injuries.

Check availability
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 612651 Protective Cover is a dedicated safety accessory for the Stage Right by Monoprice Hologram 3D Display (model 612650). Hologram fan displays create their visual effect using rapidly spinning LED blades, which presents an obvious hazard in environments where people can reach the unit. This cover provides a physical barrier that prevents accidental contact and discourages tampering, making it a practical requirement for any installation mounted below 8 feet — particularly in retail stores, trade show booths, lobbies, and event spaces where foot traffic passes close to the display.

Measuring 20 x 20.25 x 6.5 inches and weighing 5 pounds, the cover is built to fit precisely over the 612650 unit. Its white finish is designed to be unobtrusive in most commercial settings. While Monoprice does not specify the exact material, the cover is rigid enough to serve as a reliable safety barrier. For operators using the hologram display in any public-facing context, this accessory addresses a genuine liability concern and is worth treating as a mandatory companion to the display itself.

Key Features

The display should normally be mounted at least 8 feet above the ground to prevent tampering and injury

If it must be mounted below 8 feet, This protective cover should be used

This is a protective cover for the stage right by Monoprice hologram 3D display

Quality at a fair price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

Specifications

Brand
Monoprice
Model
612651
Compatibility
Stage Right by Monoprice Hologram 3D Display (612650)
Purpose
Prevents tampering and injury
Color
White
Dimensions
20 x 20.25 x 6.5 inches
Weight
5 pounds

Pros & Cons

👍 Pros

  • Prevents accidental contact with the spinning fan blades of the hologram display
  • Designed as an exact fit for the Stage Right 612650, ensuring secure coverage
  • Adds a tamper-deterrent layer for public and commercial installations
  • Lightweight at 5 pounds, minimizing added stress on the mounting setup

👎 Cons

  • Only compatible with a single product (Monoprice 612650), limiting versatility
  • Material composition is not specified by the manufacturer
  • At 20 x 20.25 x 6.5 inches, the cover adds noticeable bulk to the display setup
  • May slightly reduce hologram brightness or clarity depending on viewing conditions

Frequently Asked Questions

Yes, it is designed exclusively for model 612650. It will not fit other hologram displays or projectors due to its specific dimensions and mounting design.
Monoprice recommends using it whenever the hologram display is installed below 8 feet, where people could reach the spinning blades. It is essential for public-facing installations like retail, trade shows, and events.
The cover is designed to allow the holographic effect to remain visible while providing a physical barrier. Some minor reduction in brightness or clarity may occur depending on viewing angle and ambient lighting.
It is designed to mount directly over the hologram unit. Refer to the included instructions for the specific attachment method for your installation type.

Related Products