
RCF
RCF HDL6AWHITE Active Line Array Module 1400W 6" Speaker White
6.0"1400W
RCF's 1400W active line array module delivers 131 dB SPL from dual 6-inch neodymium woofers in a sleek white enclosure.
$1,799.00*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Total power: 1400 W, Two-Way Amplification
Frequency Response -3 dB: 65 Hz ÷ 20000 Hz / Max SPL: 131 dB
1.7" voice coil neodymium compression driver
2 x high power neodymium 6.0"woofers
48 kHz, 32 bit floating point DSP processing
Specifications
Type
Active Line Array Module
Total Power
1400 W
Amplification
Two-Way
Frequency Response (-3 dB)
65 Hz – 20,000 Hz
Max SPL
131 dB
Compression Driver
1.7" Voice Coil Neodymium
Woofers
2 x 6.0" High Power Neodymium
DSP Processing
48 kHz, 32-bit Floating Point
Color
White
Pros & Cons
👍 Pros
- Built-in 1400W two-way amplification eliminates the need for external amp racks
- Onboard 32-bit floating point DSP reduces outboard processing requirements
- Compact 6-inch format keeps array weight and wind load manageable for mid-size venues
- White finish suits architectural installations where black speakers would be visually intrusive
- Neodymium drivers in both the compression driver and woofers keep the module lightweight
👎 Cons
- 65 Hz low-frequency limit means dedicated subwoofers are required for full-range reproduction
- Six-inch woofers produce less output per box than larger-format line arrays, requiring more modules for big venues
- White enclosure may show dirt and scuff marks more readily than black cabinets on tour
- Premium pricing compared to passive line array modules that share a single amplifier rack
Frequently Asked Questions
How many RCF HDL6-A modules can be flown together in a single array?
RCF recommends arraying up to 24 HDL6-A modules per column depending on rigging hardware and venue requirements. Consult the RCF rigging guide for specific load calculations.
Does the HDL6-A White include onboard DSP processing?
Yes, the module features built-in 48 kHz, 32-bit floating point DSP for crossover management, EQ, delay, and limiting without requiring an external processor.
What is the coverage pattern of the HDL6-A module?
Each module provides wide horizontal coverage suitable for line array deployment. Vertical coverage is controlled by the splay angle set between adjacent modules in the array.
Can the white version be used alongside the standard black HDL6-A modules?
Both versions share identical electronics, drivers, and rigging hardware. The white finish is designed for installations where visual aesthetics require a lighter-colored speaker system.
Does this module require an external amplifier?
No. The HDL6-A is a fully active module with a built-in 1400W two-way amplification system, so no external amplifier rack is needed.