Corsair

Corsair CMSX4GX4M1A2400C16 Vengeance 4GB SODIMM DDR4 RAM

DDR4-2400 at 1.2V gives your 6th-gen Intel notebook a bandwidth boost without touching the BIOS.

$19.99*
Check availability

*Price sourced from Amazon.com. Last updated:Sep 16, 2026.Price and availability are subject to change — details.

Affiliate Disclosure: As an Amazon Associate, Studio Supplies earns from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Corsair Vengeance CMSX4GX4M1A2400C16 is a single 4GB DDR4 SODIMM module rated at 2400MHz with CL16-16-16-39 timings at 1.2V. On its rated 6th-generation Intel Core platforms, those specs represent a step up from the DDR3-1600 memory common in older notebooks — DDR4's wider bus and higher clock provide measurably more bandwidth, which matters most in scenarios where the integrated GPU is sharing system memory for graphics tasks, or where background application memory pressure is high. The 1.2V operating voltage is the DDR4 standard and runs approximately 15–20% more efficiently than DDR3's typical 1.5V, a useful property in a thermally constrained notebook chassis.

This module is built for one job: straightforward capacity and speed upgrades in compatible 6th-gen Intel notebooks. The auto-overclocking feature removes the friction of BIOS configuration — important in an audience that may be upgrading a work laptop rather than tuning a gaming rig. Where it falls short for power users is the single-channel penalty: a lone 4GB stick operates in single-channel mode, cutting memory bandwidth in half compared to a matched dual-channel kit. For anyone rebuilding memory from scratch, a matched pair of two 4GB or two 8GB DDR4-2400 sticks is the more efficient configuration. As a complement to an existing 4GB module, this brings total capacity to a workable 8GB at a cost-effective price point.

Key Features

4GB (1x4GB) ddr4 SODIMM kit for 6th generation Intel Core i5 and i7 notebooks

2400MHz

16-16-16-39 latency

1.2V

Auto-overclocking with compatible notebooks (no BIOS configuration required).

Specifications

Capacity
4GB (1x4GB)
Type
DDR4 SODIMM
Speed
2400MHz
Latency
16-16-16-39
Voltage
1.2V
Compatibility
6th generation Intel Core i5 and i7 notebooks

Frequently Asked Questions

Corsair rates this module for 6th-generation Intel Core i5 and i7 notebooks. It uses the standard DDR4 SODIMM form factor and voltage spec, so it will physically seat in most DDR4 SODIMM slots, but validated auto-overclock behavior to 2400MHz is specified for 6th-gen Intel platforms. Verify your specific model's memory support list before purchasing.
No. The auto-overclocking feature negotiates 2400MHz automatically on compatible notebooks without requiring any BIOS entry or XMP profile selection. On non-compatible systems it will default to the JEDEC standard speed for your platform.
Physically yes, but dual-channel operation requires two matched identical modules running in the same-capacity, same-speed configuration. Pairing this with an existing 4GB DDR4 stick from a different manufacturer or spec may result in dual-channel operation, but compatibility isn't guaranteed — and speed will be limited to the slower module's rating.
The module runs CL16-16-16-39 at 2400MHz and 1.2V. These are standard JEDEC DDR4-2400 timings — not tight by enthusiast standards, but consistent and reliable across compatible platforms.
4GB as a total system amount is below the recommended floor for Windows 10/11 or macOS. This module is best used as an addition to existing memory rather than a standalone total. In a system with an existing 4GB stick, this brings you to 8GB — a more workable baseline for web browsing, office applications, and light multitasking.