
EVGA
EVGA 100-BP-0750-K1 750 BP 750W 80+ Bronze Power Supply
★★★★★
750W80 PLUS Bronze
Pushes 750W of stable, DC-DC regulated power at 85%+ efficiency — enough headroom for a full mid-range gaming build without overpaying for wattage you won't use.
$89.99*
Check availability
*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
80 PLUS Bronze certified, with 85% efficiency or higher under typical loads
Active Power Factor Correction
EVGA Global 3 Year Limited Warranty and unparalleled EVGA Customer Support
DC-DC Converter improves 3.3V/5V stability
Specifications
Brand
EVGA
Model
100-BP-0750-K1
Wattage
750W
Efficiency Certification
80 PLUS Bronze (85%+ at typical loads)
Power Factor Correction
Active PFC
Rail Architecture
DC-DC converter (3.3V/5V)
Form Factor
ATX
Cooling
Air (fan-cooled)
Modular
Non-modular
Warranty
3-Year EVGA Global Limited Warranty
Pros & Cons
👍 Pros
- 80 PLUS Bronze certification guarantees 85% efficiency at 50% load — the real-world operating range for most mid-range builds — reducing waste heat generation and long-term electricity costs compared to uncertified units.
- DC-DC converter for the 3.3V and 5V rails delivers independent regulation on lower-voltage rails, measurably improving voltage stability when GPU load spikes on the 12V rail simultaneously.
- 750W capacity provides a comfortable 200–300W buffer above typical mid-range system peak draw, which keeps the PSU operating in its high-efficiency zone rather than near its rated ceiling.
- Active Power Factor Correction improves the power factor to near unity, reducing reactive current draw from the AC circuit — a meaningful spec for UPS sizing and power strip load calculations.
- EVGA 3-year global limited warranty covers the unit against defects over the standard failure-window horizon for PSU components.
👎 Cons
- Non-modular cable design means all cables are permanently attached — unused cables (second PCIe connector, surplus SATA runs) must be bundled and stuffed into the case, which complicates cable management in compact Mid-Tower builds.
- No 80 PLUS Gold or higher certification — at Gold efficiency (87–90% at 50% load), long-run electricity savings become meaningful for systems running 24/7; Bronze is adequate for gaming systems but not optimal for always-on workloads.
- No semi-modular configuration option at this wattage tier in the BP lineup, limiting its suitability for builds where clean aesthetics behind a windowed side panel are a priority.
- Specific 12V rail amperage and rail topology (single vs. multi-rail) are not detailed in available documentation — power users building high-end single-GPU systems should verify 12V rail delivery before assuming headroom.
Frequently Asked Questions
Is 750W enough for a mid-range gaming PC with a discrete GPU?
Yes, for the vast majority of mid-range builds. A system with a current-generation mid-range GPU (drawing 150–200W TDP) and a mainstream CPU (65–125W TDP) will peak well under 500W under full synthetic load. The 750W rating gives you a meaningful headroom buffer without the efficiency penalty that comes from a severely underloaded higher-wattage unit.
What does 80 PLUS Bronze certification mean in practice?
80 PLUS Bronze requires 82% efficiency at 20% load, 85% at 50% load, and 82% at 100% load. At 50% load — the most common real-world operating point for a 750W PSU in a mid-range build — you're converting at least 85 cents of every dollar of AC power into usable DC. The remaining ~15% is lost as heat. This is the efficiency floor for a sensible modern build; anything below 80 PLUS is not worth the electricity costs over the unit's lifespan.
What does the DC-DC converter improve over a traditional group-regulated design?
Traditional PSU designs regulate the 3.3V and 5V rails in a group, meaning voltage stability on one rail is influenced by load changes on the other. The DC-DC converter in the 750 BP derives the 3.3V and 5V rails independently, so a GPU spike on the 12V rail does not destabilize the 5V rail powering storage or USB controllers. The practical result is tighter voltage regulation under mixed-load conditions.
Is the 750 BP modular or non-modular?
The 750 BP is a non-modular design, meaning all cables are permanently attached. This is standard for value-tier PSUs and reduces connector resistance, but it means unused cables must be managed inside the case. For a first build or a budget-focused system where cable management is secondary, this is a non-issue; for a showcase build in a windowed case, a semi-modular or fully modular unit may be preferable.
What warranty does the EVGA 750 BP carry?
EVGA backs the 750 BP with a 3-year global limited warranty. For a value-tier PSU, this is a reasonable coverage window — most PSU failures manifest within the first three years of operation.