Monoprice 108780 SATA 6Gbps Data Cable 2ft — main product image

Monoprice 108780 SATA 6Gbps Data Cable 2ft

Monoprice

Monoprice 108780 SATA 6Gbps Data Cable 2ft

Name: Monoprice 108780 SATA 6Gbps Data Cable 2ft
Brand: Monoprice
SKU: 108780

★★★★★4.7 (6096 reviews)

Ten inches of SATA 6Gbps connectivity with a locking latch — built for tight chassis where cable routing demands a right-angle connector.

$6.23*

Check availability

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 108780 in its 10-inch configuration is a SATA Revision 3.0 cable rated to the interface's full 6Gbps throughput ceiling — equivalent to approximately 550–600MB/s of real-world sustained transfer, which is the practical maximum of any SATA-attached storage device currently available. The cable's geometry is its defining specification: a 90-degree connector at one end and a straight (180-degree) connector at the other, separated by exactly 10 inches of cable. That length is not arbitrary — it corresponds to the typical routing distance in Mini-ITX cases, 2.5-inch SSD cage installations, and compact NAS enclosures where the drive and motherboard SATA port are in close proximity. Locking latches at both terminations add mechanical retention to what is otherwise a friction-fit connector standard.

This cable belongs in the kit of any builder working with space-constrained hardware. In a Fractal Node 304, a Silverstone SG series, or a standard 4-bay NAS chassis, a standard 2-foot SATA cable creates cable management problems — excess length blocks airflow paths and requires awkward bundling. The 10-inch 108780 routes cleanly between adjacent components with minimal excess. The backward compatibility with SATA 3Gbps and 1.5Gbps devices means a single cable SKU covers HDDs, SSDs, and optical drives across all SATA generations. For system integrators cabling multiple drives in high-density enclosures, the locking latches are not a luxury — they're a reliability requirement that eliminates a common source of intermittent drive errors.

Key Features

Up to 6 Gbps when used with equivalent devices and controllers.

One end features a straight connector, while the other end uses a 90-degree connector.

With attached locking latch to ensure that your connections do not come loose due to movement or vibration.

10 inches long.

Backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices.*

Specifications

Interface

SATA Revision 3.0

Data Transfer Rate

Up to 6Gbps

Connector A

90-degree SATA

Connector B

180-degree (straight) SATA

Locking Latch

Yes, both ends

Length

10 inches

Color

Black

Backward Compatibility

SATA 3Gbps, SATA 1.5Gbps

Pros & Cons

👍 Pros

10-inch length eliminates cable slack in compact ITX and SFF builds where a standard 18-inch or 24-inch cable creates airflow obstruction.
Locking latches on both ends provide mechanical retention against vibration-induced disconnection — critical in NAS and server chassis.
Full SATA Revision 3.0 compliance means no cable-side throughput ceiling for any current SATA device.
90-degree-to-straight connector configuration reduces cable stress at the motherboard port in clearance-limited builds.
Backward compatible with SATA 3Gbps and 1.5Gbps, covering the full installed base of SATA drives.

👎 Cons

10-inch length is restrictive — drive placement even a few inches farther from SATA ports than expected makes this cable unusable without a longer replacement.
Single right-angle end may not fit vertically-oriented SATA port layouts on certain compact motherboards.
No sleeving or EMI shielding on the cable jacket, which is a minor concern in signal-dense environments.
Black colorway makes cable tracing difficult in dark interiors during troubleshooting.

Frequently Asked Questions

At 10 inches, how does this cable's length compare to the 2-foot version, and when should I choose it?

Ten inches (approximately 25cm) is optimized for compact ITX builds, NAS enclosures, and cases where the drive bay sits adjacent to the motherboard SATA ports. A 2-foot cable in the same scenario creates excess slack that complicates airflow management. If your routing distance exceeds roughly 8 inches, size up.

Does the 90-degree connector on this cable fit all motherboard SATA port orientations?

The 90-degree connector works with horizontally-oriented motherboard SATA ports — the most common layout on ATX and mATX boards. Vertically-oriented ports (found on some compact boards) may require a straight connector on both ends. Check your motherboard's port orientation before ordering.

Will this cable limit throughput on a SATA SSD rated above 500MB/s?

No SATA SSD exceeds the SATA 6Gbps (roughly 600MB/s real-world) interface ceiling, so this cable introduces zero throughput constraint. The cable supports the full SATA 3.0 specification.

Does backward compatibility with SATA 3Gbps and 1.5Gbps devices affect cable performance?

Backward compatibility means the cable negotiates down to the device's native speed — the cable itself is not degraded. Using this cable with a SATA 3Gbps HDD will operate that drive at its 3Gbps ceiling, not at 6Gbps.

What does the locking latch do that a standard SATA connector doesn't?

Standard SATA connectors rely on friction retention alone and can work loose under vibration or cable tension. The locking latch on the 108780 clips mechanically into the drive's or motherboard port's retention groove, requiring deliberate depression to disconnect — a meaningful reliability difference in any chassis with active vibration.