Monoprice

Monoprice 115169 Cat6A Ethernet Patch Cable 10-Pack

4.9 (19 reviews)

Slim 30AWG Cat6A patch cables in a 10-pack deliver 10G speeds while cutting cable clutter in half.

$41.71*$52.24Save 20%
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 16, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 115169 SlimRun Cat6A Ethernet Patch Cable 10-Pack is designed for environments where cable density and airflow matter. Each cable uses 30AWG pure bare copper conductors — roughly 40% thinner than standard Cat6A patch cables — while still meeting the Cat6A specification for 10 Gbps throughput at up to 550 MHz. This makes them particularly well suited for data centers, server rooms, and high-density networking closets where dozens or hundreds of cables compete for limited space.

At 14 feet per cable, this 10-pack covers typical patch panel-to-switch and wall jack-to-workstation distances. The snagless RJ45 connectors protect the locking tabs from damage during frequent plugging and unplugging, which is especially valuable in environments with tight cable bundles. While the slim gauge delivers clear benefits for organization and airflow, it does mean these cables are less robust under physical stress and less suitable for PoE deployments that demand higher current capacity.

Key Features

At half the size of standard Cat6A patch cables (0.149" v 0.29"), SlimRun Cat6A helps reduce congestion in high-density environments, such as data centers and telecommunications rooms

With SlimRun Cat6A, you can fit more cables in the same space, saving you the time and cost of expanding or replacing cable pathways

0.118-inch diameter, 30AWG flexible cable and snagless narrow boot design

10-Pack

Specifications

Brand
Monoprice
Model
115169
Series
SlimRun
Type
Cat6A Ethernet Patch Cable
Frequency
550 MHz
Data Transfer Rate
10G
Wire
Pure Bare Copper
Gauge
30AWG
Length
14 Feet
Connector
Snagless RJ45
Quantity
10-Pack

Pros & Cons

👍 Pros

  • Slim 30AWG design dramatically improves airflow and cable management in dense rack environments
  • 10-pack quantity provides consistent cabling for switch-to-patch-panel or workstation runs
  • Pure bare copper conductors deliver reliable 10G performance without signal degradation
  • Snagless RJ45 connectors simplify cable routing and prevent tab breakage
  • 550 MHz frequency rating meets Cat6A standards for future-proof networking

👎 Cons

  • 30AWG wire is more fragile than standard gauge and can be damaged if pulled or bent aggressively
  • 14-foot length may be too long for short patch runs or too short for room-spanning connections
  • Thinner gauge limits suitability for Power over Ethernet applications

Frequently Asked Questions

These Cat6A cables support up to 10 Gbps data transfer rates at frequencies up to 550 MHz.
The SlimRun design uses 30AWG pure bare copper wire, making these cables significantly thinner and more flexible than standard 23-24AWG Cat6A cables.
The 30AWG wire gauge limits current capacity, so these are not ideal for high-wattage PoE applications. They may support low-power PoE but standard-gauge cables are recommended for PoE devices.
Each of the 10 cables is 14 feet long.
Yes, the RJ45 connectors feature a snagless boot design to prevent the locking tab from catching on other cables or equipment during installation and removal.