Panasonic

Panasonic Panasonic FM Series 16V 470uf Low Impedance Capacitors (6 pcs)

4.7 (105 reviews)

Cut ripple noise by up to 70% with Panasonic's FM Series 16V 470µF low-impedance electrolytic capacitors — six-pack for serious circuit work.

$4.42*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Panasonic FM Series EEU-FM1C471 is a 16V, 470µF radial electrolytic capacitor engineered specifically for low-impedance filter applications. What separates the FM Series from standard electrolytics isn't capacitance — it's what happens when current is actually moving. The 40–70% impedance reduction versus the FC Series means less voltage drop and less heat generation under ripple load, which directly improves regulation on output rails in switching power supplies and DC-DC converters. At 1290 mA rated ripple current and a 105°C/5000-hour endurance rating, these are built for positions where commodity caps degrade prematurely. The 8×15mm body with 5mm lead spacing is a production-standard footprint, requiring no PCB modification for most through-hole designs.

These capacitors are the right tool for anyone repairing or upgrading switching power supplies, motor controllers, audio amplifier power stages, or any circuit where bulk output filtering matters. The six-unit quantity suits multi-rail PSU builds or boards requiring parallel capacitor banks for added ripple headroom. Hobbyists recapping vintage audio gear will find the low-impedance characteristic beneficial for reducing hum on sensitive supply rails. For professional repair technicians, the authentic Panasonic part number (EEU-FM1C471) ensures the component matches the original BOM specification exactly — no guesswork on whether a substitute will perform equivalently under load.

Key Features

Panasonic FM Series

Low Impedance(40 % to 70 % less than FC Series)

Endurance : 105 °C 2000 h to 7000 h

100% Authentic Panasonic made P/N EEU-FM1C471

8x15mm Lead spacing 5mm(0.394" x 0.551" 0.197")

Specifications

Series
Panasonic FM
Part Number
EEU-FM1C471
Voltage Rating
16V
Capacitance
470µF
Impedance
Low (40–70% less than FC Series)
Ripple Current
1290 mA
Endurance
5000 hours at 105°C
Body Dimensions
8mm × 15mm
Lead Spacing
5mm
Construction
Radial through-hole electrolytic
Quantity
6 pieces

Pros & Cons

👍 Pros

  • Impedance is 40–70% lower than the FC Series, reducing power supply output noise measurably at switching frequencies.
  • 1290 mA ripple current rating supports demanding filter positions in switching regulators and motor drive circuits.
  • 5000-hour endurance at 105°C provides substantial design margin in thermally controlled enclosures.
  • Standard 8×15mm / 5mm pitch through-hole footprint drops into existing PCB layouts without modification.
  • Sold in a six-pack, making them practical for multi-channel or redundant-filter board designs.

👎 Cons

  • 16V rating is a hard ceiling — circuits with transient spikes approaching that rail require derating to a higher-voltage series for reliability margin.
  • 470µF capacitance is fixed; applications needing fine-tuned filter corner frequencies must substitute different values and re-characterize the layout.
  • Electrolytic construction means polarity must be observed — incorrect installation causes failure and potential venting.
  • Not suitable for high-frequency bypass above a few hundred kHz where ceramic capacitors outperform electrolytics on impedance curves.

Frequently Asked Questions

The FM Series offers 40% to 70% lower impedance than the FC Series. Lower impedance means less energy is wasted as heat during high-frequency switching, which translates directly to cleaner power delivery and less ripple on sensitive supply rails.
Each EEU-FM1C471 is rated for 1290 mA ripple current. This makes them suitable for moderately loaded switching power supply output stages and DC-DC converter filter positions where ripple handling matters more than raw capacitance alone.
These are rated for 5000 hours at 105°C. Operated below maximum temperature — as most real-world circuits do — lifespan extends substantially, with Panasonic's general derating rule roughly doubling life for every 10°C reduction.
The capacitor body measures 8mm diameter × 15mm height, with a 5mm lead pitch. This is a standard through-hole footprint that fits most PCB layouts designed for 8mm-diameter radial electrolytics without pad modification.
Yes. These are listed as 100% authentic Panasonic parts with the manufacturer part number EEU-FM1C471. Verify the part number against Panasonic's official datasheet if sourcing for production use.