Acer

Acer 60.M09N2.002 Aspire E1-521 E1-531 E1-571 Lower Cover

Name: Acer 60.M09N2.002 Aspire E1-521 E1-531 E1-571 Lower Cover
Brand: Acer
SKU: 60.M09N2.002

Restore your Acer Aspire's structural integrity with an exact-fit OEM lower cover designed for the E1-521, E1-531, and E1-571 chassis.

View price on Amazon

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Acer 60.M09N2.002 is the OEM bottom case panel for the Aspire E1-521, E1-531, and E1-571 notebook series. Unlike aftermarket replacements that may use thinner ABS plastic or misaligned screw bosses, this part carries the original Acer part number, indicating it was produced to the same tooling specifications as the unit that shipped from the factory. The lower cover performs several mechanical functions simultaneously: it provides the structural floor of the chassis, houses the rubber feet contact points, and protects internal components from below. A cracked or shattered lower cover compromises all three of these roles, making replacement a functional necessity rather than merely cosmetic.

This part is the correct solution for E1-521, E1-531, and E1-571 owners dealing with impact-cracked bases, stress-fractured screw bosses, or broken retention clips. It is a drop-in repair requiring standard disassembly tools and no component transfers beyond hardware. The repair profile — remove perimeter screws, release clips, swap panel, reinstall — makes this accessible to users with basic laptop repair experience. It is not suitable as a universal fix across the broader Aspire lineup; fitment depends on matching the 60.M09N2.002 part number precisely to the original chassis label.

Specifications

Brand

Acer

Part Number

60.M09N2.002

Type

Lower Cover / Bottom Case

Compatible Models

Acer Aspire E1-521, E1-531, E1-571

Pros & Cons

👍 Pros

Direct OEM part number match (60.M09N2.002) eliminates guesswork on fitment for E1-521, E1-531, and E1-571 chassis.
Acer-branded sourcing means material thickness, screw boss placement, and clip geometry match factory tolerances.
Restores full bottom-panel structural rigidity, protecting the motherboard and battery from chassis flex caused by a cracked base.
Straightforward screw-and-clip attachment requires no specialized tools beyond a Phillips screwdriver.

👎 Cons

Compatibility is limited to three Aspire E1 models — does not cross-fit other Acer product lines, even visually similar ones.
Screws and rubber feet are not confirmed as included, requiring careful parts management during the original disassembly.
Chassis revision variations within the E1-531/E1-571 production run mean the part number must be verified against the original label — the model name alone is not sufficient confirmation.
As a cosmetic/structural part, it ships without any active components, so it cannot address hinge, motherboard, or port damage.

Frequently Asked Questions

Which Acer Aspire models is this lower cover compatible with?

This cover is confirmed compatible with the Acer Aspire E1-521, E1-531, and E1-571. The part number 60.M09N2.002 is the OEM identifier — match this number against your existing bottom case label before ordering.

Does this lower cover include mounting screws or rubber feet?

The product listing does not indicate that screws or rubber feet are included. Retain your original hardware during disassembly and transfer it to this replacement panel.

Will this cover fit if my laptop has a different sub-model revision of the E1-531 or E1-571?

The E1-521/E1-531/E1-571 series had multiple board revisions across their production runs. The 60.M09N2.002 part number targets a specific chassis revision — verify your existing bottom case's part number matches before purchasing to avoid fitment issues.

Is this an OEM Acer part or an aftermarket reproduction?

This is listed as an Acer-branded part with the OEM part number 60.M09N2.002, indicating it originates from Acer's supply chain rather than a third-party manufacturer.

How difficult is it to swap out the lower cover on these Aspire models?

The E1-series lower cover is secured by perimeter Phillips screws, typically 10–14 depending on revision. It is a straightforward disassembly requiring only a Phillips screwdriver and a plastic spudger to release the clip perimeter — no soldering or cable transfers required.