AdaLov

AdaLov CPE882 Outdoor WiFi 6 Point-to-Point Bridge Kit

A factory-paired WiFi 6 bridge and router kit that carries internet up to 3.1 miles to a barn, garage, or shop without trenching cable

$299.99*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Aug 01, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The AdaLov CPE882 kit is aimed at property owners who need internet in a second building but can't easily run cable to reach it. Rather than selling the bridge alone, AdaLov bundles the CPE882 outdoor WiFi 6 unit with the WR3000K WiFi 6 router, creating a two-part chain: the bridge moves the connection across the property over a wireless point-to-point link, and the router rebuilds usable WiFi and wired ports once it arrives. That makes it a fit for detached garages, barns, workshops, guesthouses, studios, and offices, and it can extend Ethernet-enabled networks compatible with Starlink when one satellite source needs to serve several locations.

On the performance side, the CPE882 leans on WiFi 6 and a 14dBi directional antenna, with a rated reach of up to 3.1 miles under clear line-of-sight. Dual 2.4GHz and 5.8GHz bands give installers a fallback when interference or obstacles interfere with the link. Ownership details reflect its outdoor purpose: the enclosure is IP65-sealed, TVS protection defends against surges, and PoE with 24V/48V support lets the unit mount where the signal path is clearest while power stays sheltered. The units ship factory-paired, and a pairing control helps re-establish the link after a reset. At the destination, the six-antenna WR3000K distributes access with WPA3, guest networking, and mesh expansion on tap.

Key Features

COMPLETE WIFI 6 BRIDGE AND ROUTER KIT: This all-in-one package combines the CPE882 WiFi 6 outdoor bridge with the WR3000K WiFi 6 router to create a complete network for a second building. The bridge carries the connection across the property, while the router provides indoor WiFi and wired access at the destination. It reduces the need for extra hardware in garages, barns, workshops, guesthouses, studios, and offices and can extend Ethernet-enabled networks compatible with Starlink.

WIFI 6 PERFORMANCE FOR LONG-RANGE LINKS: The CPE882 uses WiFi 6 technology to improve wireless efficiency for building-to-building data transmission. Its 14dBi directional antenna supports links up to 3–5 km under ideal, unobstructed line-of-sight conditions. Mounting height, antenna alignment, terrain, trees, walls, metal structures, and nearby interference can affect final speed, signal quality, stability, and usable range, so careful site planning is important.

WIFI 6 COVERAGE INSIDE THE REMOTE BUILDING: After the bridge delivers internet to the destination, the included WR3000K WiFi 6 router distributes access to phones, laptops, tablets, smart TVs, cameras, and other devices. Its six-antenna design supports broader indoor coverage, while Mesh compatibility allows expansion with supported devices when more coverage is needed. This makes the kit useful for detached offices, garages, guest spaces, workshops, and studios.

DUAL-BAND FLEXIBILITY FOR DIFFERENT INSTALLATIONS: The CPE882 supports 2.4GHz and 5.8GHz connectivity, giving installers more options when distance, interference, building materials, or neighboring networks affect the link. The 2.4GHz band supports wider compatibility, while 5.8GHz can deliver stronger throughput when conditions are favorable. This flexibility helps adapt the bridge to suburban homes, rural properties, farms, warehouses, job sites, and storage areas.

DUAL GIGABIT PORTS FOR FLEXIBLE DEVICE CONNECTIONS: Use the Ethernet ports to connect IP cameras, NVR systems, computers, access points, routers, or network switches without being limited to one wired device. The bridge can feed a surveillance system, support several endpoints through a switch, or send the connection into the included WR3000K for indoor WiFi. This versatility is useful for offices, barns, workshops, warehouses, remote gates, and security locations.

FACTORY-PAIRED FOR FASTER INSTALLATION: The two CPE units arrive configured as a matched point-to-point pair, helping users avoid complex first-time setup. Connect power and Ethernet, mount the devices, align the antennas, and confirm signal quality before final tightening. A built-in pairing control also helps reconnect the wireless link after a reset or settings change, making deployment easier for homeowners, installers, contractors, technicians, and property managers.

FLEXIBLE POE PLACEMENT FOR BETTER ALIGNMENT: Power and network data can share one Ethernet run, allowing the outdoor bridge to be mounted where the signal path is clearer instead of beside a wall outlet. Installers can place the unit higher on a pole, eave, wall, or rooftop while keeping the power equipment in a protected area. Compatibility with 24V/48V power options can simplify cable routing for detached buildings, gate systems, camera posts, workshops, and rural properties.

IP65 OUTDOOR HOUSING WITH TVS SURGE PROTECTION: The sealed CPE enclosure helps reduce exposure to dust, rain, and common outdoor weather conditions, while TVS protection adds defense against electrical surges linked to unstable power or nearby storms. Proper grounding, weather-protected cable connections, secure mounting hardware, and drip loops are recommended for outdoor deployment. This design suits farms, yards, warehouses, shops, and other exposed installation points.

COMPATIBLE WITH STARLINK FOR MULTI-BUILDING EXPANSION: Connect the bridge to an Ethernet-enabled network compatible with Starlink and extend service to a barn, workshop, livestock area, gatehouse, camera pole, remote office. The outdoor link carries internet across the property, while the included router or a network switch distributes access at the destination. This is useful when one satellite internet source serves several locations and trenching cable is difficult or expensive.

ADVANCED SECURITY AND GUEST NETWORK CONTROL: Use guest-network tools to separate visitors, tenants, customers, or temporary workers from computers, cameras, storage devices, and other primary equipment. WPA/WPA2/WPA3 encryption, hidden SSID settings, WPS, and anti-DDoS protection provide multiple ways to organize and protect network access. This is valuable for rental units, workshops, offices, guest buildings, family properties and shared multi-building sites with different users.

Specifications

Brand
AdaLov
Kit Contents
CPE882 bridge and WR3000K router
WiFi Standard
WiFi 6
Frequency Bands
2.4GHz / 5.8GHz
Maximum Range
Up to 3.1 miles (line-of-sight)
Bridge Antenna
14dBi directional
Router Antennas
Six
Ethernet Ports
Dual Gigabit
Power
PoE, 24V/48V compatible
Weather Rating
IP65 with TVS surge protection
Security
WPA/WPA2/WPA3, hidden SSID, WPS, anti-DDoS
Mesh
Compatible with supported devices

Frequently Asked Questions

No. The two CPE units arrive factory-paired as a matched point-to-point set, so you mainly connect power and Ethernet, mount them, align the antennas, and confirm signal.
The 14dBi antenna is rated up to 3.1 miles, but only under ideal unobstructed line-of-sight. Trees, walls, metal structures, terrain, and interference all reduce real-world range and speed.
Yes. The included WR3000K WiFi 6 router uses a six-antenna design to distribute WiFi and wired access at the destination once the CPE882 bridge delivers the connection.
It can connect to an Ethernet-enabled network compatible with Starlink and extend that service to a barn, workshop, gatehouse, or remote office across the property.
It uses PoE, so power and data share one Ethernet run and the power gear stays indoors. The unit supports 24V/48V options to simplify cable routing to detached locations.
The enclosure carries an IP65 rating against dust and rain plus TVS surge protection. AdaLov still recommends proper grounding, weather-sealed connections, and drip loops on install.