Brands Guides About
Generic

AVYCON AVN-E16-2P16W250 18-Port Gigabit Smart PoE Switch

Power up to 16 cameras or access points over Ethernet at 30W each, then aggregate it all through two gigabit uplinks

Check availability
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The AVYCON AVN-E16-2P16W250 is a fixed-configuration switch aimed squarely at powered edge devices. Its layout tells the story: sixteen 10/100Base-TX ports carry both data and PoE+ power, and two 10/100/1000Base-T RJ45 ports serve as gigabit uplinks. Each PoE port can push up to 30W under the PoE+ spec, which covers the appetite of most fixed and pan-tilt-zoom IP cameras as well as ceiling-mounted wireless access points. For installers wiring a small building or a cluster of cameras, that combination of power and connectivity in one chassis is the main draw.

On the practical side, the switch leans on a single reliable power adapter to energize both the internal switching hardware and every connected PoE load, so there is no juggling of injectors or midspan devices. Support spans the familiar Ethernet family — IEEE802.3 10Base-T, 802.3i, 802.3u 100Base-TX, 802.3ab 1000Base-T, and 802.3x flow control — which keeps it friendly to a mix of legacy and current gear. AVYCON frames the smart PoE supply as stable and easy to use, pointing to a plug-and-play role rather than a heavily configured one. The result is infrastructure that quietly does one job well: getting power and data out to the endpoints that need them.

Key Features

10/100M Access, Gigabit RJ45

Smart PoE power supply

Stable and reliable, easy to use

IEEE802.3 10Base-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3x

16-Port 10/100Base-TX PoE

2-Port 10/100/1000Base-T RJ45

Reliable Power Adapter supply power for both network switch and PoE

Max Power per port is 30W, PoE+

Specifications

Model
AVN-E16-2P16W250
Manufacturer
AVYCON
Total Ports
18
PoE Ports
16 x 10/100Base-TX
Uplink Ports
2 x 10/100/1000Base-T RJ45
PoE Standard
PoE+ (IEEE802.3)
Max Power Per Port
30W
Standards Supported
802.3 10Base-T, 802.3i, 802.3u 100Base-TX, 802.3ab 1000Base-T, 802.3x
Power Supply
Single adapter for switch and PoE
PoE Management
Smart PoE power supply

Frequently Asked Questions

It provides sixteen PoE+ ports, each supplying up to 30W, so it can power up to sixteen IP cameras or access points from a single unit.
The sixteen PoE ports run at 10/100Base-TX speeds. Only the two dedicated RJ45 uplink ports support 10/100/1000Base-T gigabit connections.
No. A single bundled power adapter supplies both the switch and the PoE loads, delivering power directly over each port without external injectors.
It is described as a smart PoE switch focused on stable, easy-to-use operation, so it emphasizes plug-and-play PoE delivery rather than full managed-switch configuration.
It supports IEEE802.3 10Base-T, 802.3i, 802.3u 100Base-TX, 802.3ab 1000Base-T, and 802.3x flow control, covering both legacy and gigabit devices.
PoE+ is a power-over-Ethernet standard delivering more wattage than basic PoE. Each of the sixteen PoE ports supports it with a maximum of 30W per port.

Related Products