Brands Guides About
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply — main product image
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply
EVGA

EVGA 100-GD-0600-V1 600 GD 600W 80+ Gold Power Supply

★★★★★4.7 (2545 reviews)
600W80 plus Gold

600W of 80+ Gold-certified power with a five-year warranty — reliable, efficient delivery for mid-range builds that don't compromise on protection.

$74.99*$84.99Save 11%
Check availability

*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The EVGA 600 GD is a 600W ATX power supply rated at 80+ Gold efficiency, meaning it converts at least 87% of AC input to usable DC power across typical load ranges, rising to 90% at 50% load. That efficiency gap versus a Bronze-rated unit translates to measurably less heat inside the chassis and lower operating costs over a multi-year lifespan. Its single 12V rail topology — paired with a DC-DC converter for the 3.3V and 5V rails — is the correct modern architecture for systems with discrete GPUs: all 600W of 12V capacity is available to any connector without per-rail caps interrupting power delivery during GPU transients. Active power factor correction (APFC) keeps power draw from the wall clean and consistent, reducing reactive power waste and the electrical noise that uncontrolled PFC can introduce.

The 600 GD is best suited to mainstream mid-range builds: think Ryzen 5 or Core i5 platforms paired with a GPU in the RTX 3060 Ti to RX 7700 XT class, with a moderate storage and peripheral load. The five-layer protection stack — OVP, UVP, OCP, OPP, and SCP — provides hardware-level fault response that doesn't depend on system software to trigger, which matters for always-on workstations and home servers. The fixed cable configuration is the primary trade-off: unlike semi-modular competitors, every harness is permanently attached, requiring deliberate cable management in the case. For builders prioritizing proven reliability, efficiency certification, and long warranty coverage over cable aesthetics, the 600 GD is a straightforward, well-engineered choice.

Key Features

80 plus Gold certified, with 90% efficiency or higher under typical loads

Single 12V. Rail, DC DC converter to improve 3. 3V./ 5V. Stability

Active power factor correction

5 year and unparalleled EVGA customer support

Heavy duty protections, including OVP (Over voltage protection), UVP (Under voltage protection), OCP (Over current protection), OPP (over power protection), and SCP (short circuit protection)

Specifications

Efficiency Certification
80 Plus Gold
Efficiency Rating
90% or higher (typical loads)
12V Rail Design
Single
Converter Type
DC to DC
3.3V/5V Stability Improvement
Yes
Power Factor Correction
Active
Warranty
5 Year
Over Voltage Protection (OVP)
Yes
Under Voltage Protection (UVP)
Yes
Over Current Protection (OCP)
Yes
Over Power Protection (OPP)
Yes
Short Circuit Protection (SCP)
Yes
Wattage
600W

Pros & Cons

👍 Pros

  • 80+ Gold certification guarantees 87–90% efficiency under typical loads, meaningfully reducing heat output and electricity cost compared to Bronze-rated units over years of operation.
  • The single 12V rail with DC-DC converter for 3.3V and 5V rails provides stable voltage delivery under dynamic GPU load spikes without the current-limiting drawbacks of older multi-rail designs.
  • Active power factor correction ensures cleaner power draw from the wall, which reduces electrical noise that can affect sensitive audio hardware sharing the same circuit.
  • Five comprehensive hardware protection circuits (OVP, UVP, OCP, OPP, SCP) guard against a full range of fault conditions without relying solely on software or firmware intervention.
  • The five-year warranty reflects genuine manufacturer confidence in component longevity — a meaningful assurance for a component that runs continuously.

👎 Cons

  • Fixed cabling means every connector is always present inside the case, requiring careful management of unused cables that can restrict airflow in tighter builds.
  • 600W headroom is adequate for current mid-range builds but leaves little margin for future GPU upgrades to high-TDP cards without replacing the PSU.
  • No modular or semi-modular design option in this model tier limits cable routing flexibility compared to competing units at similar price points.
  • ATX form factor only — not usable in SFX-compatible small form factor cases that are increasingly common in compact workstation and gaming builds.

Frequently Asked Questions

600W covers most builds pairing a mid-tier CPU (Ryzen 5/Core i5 class) with a GPU in the RTX 3060 / RX 6700 XT tier. For high-TDP cards like the RTX 4080 or RX 7900 XT, step up to 750W or higher — the 600 GD will run close to its ceiling under sustained load, which shortens component lifespan.
A single 12V rail delivers all available amperage to any connector without per-rail current limits tripping under surge. For systems with a high-draw GPU and multiple storage drives, this simplifies load balancing and avoids nuisance shutdowns that can occur when a multi-rail PSU's individual rail limit is hit.
The unit includes OVP (over-voltage — protects components if rail voltage spikes), UVP (under-voltage — shuts down before brownout damage), OCP (over-current — prevents excessive current draw per rail), OPP (over-power — total wattage cap enforcement), and SCP (short-circuit — immediate shutdown on a dead short). Together they form a complete hardware safety net for the system.
The 600 GD is an ATX form factor PSU. It fits standard mid-tower and full-tower cases. It is not compatible with SFX or SFX-L slots in compact ITX or small form factor builds.
The 600 GD uses a fixed (non-modular) cable configuration. All cables are permanently attached, which means unused cables must be managed inside the case. For builds where cable management is a priority, factor in routing space when selecting a chassis.

Related Products