
Gigabyte
Gigabyte GP-AG41TB 1TB AORUS Gen4 NVMe SSD
★★★★★
PCIe 4.0 NVMe SSD delivering up to 5,000 MB/s reads with a Phison E16 controller and 1GB DDR4 cache.
$169.00*
Check availability
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
AORUS Next Generation PCIe 4.0 NVMe SSD
Capacity : 2 TB
External DDR Cache Buffer: DDR4 2 GB
Interface : NVMe 1.3, PCI-Express 4.0 x4
Seq. Read speed : up to 5000 MB/s (Random Rear IOPS 750K)
Seq. Write speed : up to 4400 MB/s (Random Write IOPS 700K)
Controller :Phison E16
NAND Flash :3D-TLC NAND Flash
Wear Leveling, Over-Provision Technologies
TRIM & S.M.A.R.T supported
Specifications
Brand
Gigabyte
Model
GP-AG41TB
Capacity
1 TB
Interface
PCIe 4.0 x4, NVMe 1.3
Form Factor
M.2
Controller
Phison E16
NAND Type
3D TLC NAND Flash
DRAM Cache
1GB DDR4
Sequential Read
Up to 5,000 MB/s
Sequential Write
Up to 4,400 MB/s
Pros & Cons
👍 Pros
- Sequential read speeds up to 5,000 MB/s significantly reduce load and transfer times
- 1GB DDR4 DRAM cache buffer helps sustain performance during prolonged writes
- Phison E16 controller is a proven, widely adopted PCIe 4.0 NVMe controller
- 1TB capacity provides ample room for an operating system, games, and project files
👎 Cons
- Requires a PCIe 4.0-compatible motherboard and CPU to reach advertised speeds
- TLC NAND has lower endurance per cell compared to MLC-based drives
- No heatsink mentioned, and the drive may throttle under sustained loads without adequate cooling
- First-generation PCIe 4.0 controller (E16) has been surpassed by newer designs offering higher efficiency
Frequently Asked Questions
What interface does the AORUS Gen4 SSD use?
It uses an M.2 form factor with a PCIe 4.0 x4 interface and NVMe 1.3 protocol, so your motherboard needs a PCIe 4.0-capable M.2 slot for full speed.
What are the sequential read and write speeds?
The drive is rated for up to 5,000 MB/s sequential read and up to 4,400 MB/s sequential write speeds.
Does this SSD have a DRAM cache?
Yes, it includes a 1GB external DDR4 cache buffer, which helps maintain consistent performance during sustained workloads.
What type of NAND flash does it use?
It uses 3D TLC (Triple-Level Cell) NAND flash, which balances storage density, performance, and endurance.
Is a heatsink included?
Product details do not specify an included heatsink. Many motherboards provide their own M.2 heatsinks, or aftermarket options are available.