G.Skill F4-2400C15D-8GVR 8GB Ripjaws V DDR4 2400MHz RAM

Name: G.Skill F4-2400C15D-8GVR 8GB Ripjaws V DDR4 2400MHz RAM
Brand: G.Skill
SKU: F4-2400C15D-8GVR

Overview

The G.Skill Ripjaws V F4-2400C15D-8GVR is a dual-channel DDR4 memory kit consisting of two 4GB UDIMM modules rated at 2400MT/s with CAS latency timings of 15-15-15-35. Running at the standard DDR4 voltage of 1.20V, this kit is designed as an efficient and hassle-free upgrade for desktop systems. Intel XMP profile support means users can simply enable XMP in their motherboard BIOS to have the memory automatically configured at its rated speed and timings without manual overclocking.

Each module features G.Skill's Ripjaws V red aluminum heatspreader, which provides passive cooling and a distinctive appearance inside windowed or open-air cases. At 8GB total, this kit is best suited for general office productivity, light gaming, and everyday computing. Users building for heavier workloads such as video editing, large dataset work, or modern AAA gaming should consider higher-capacity and faster-speed kits from the outset, as the 2x4GB configuration leaves little room for growth without full replacement.

Key Features

G.SKILL RipjawsV Series DDR4 U-DIMM Memory Kit, Model: F4-2400C15D-8GVR

8GB total capacity kit containing 2x4GB modules, rated for up to DDR4-2400 CL15-15-15-35 at 1.20V

Non-ECC, DDR4 U-DIMM, 288-pin, for Desktop PC & Gaming

Includes JEDEC default profile, and Intel XMP memory overclock profile

Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.

Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.

Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.

Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.

For memory kits with XMP overclock profile, enable XMP/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP is an act of overclocking and requires BIOS setting adjustments.

Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.

Specifications

Brand

G.Skill

Model

F4-2400C15D-8GVR

Series

Ripjaws V

Capacity

8GB (2x4GB)

Memory Type

DDR4

Speed

2400MT/s

CAS Latency

CL15-15-15-35

Voltage

1.20V

Form Factor

UDIMM

Color

Red

Features

Intel XMP Support

Similar Products

Other products from the same family that visitors often consider:

Currently Unavailable

Pros & Cons

👍 Pros

Dual-channel 2x4GB configuration provides better bandwidth than a single 8GB stick
Runs at standard 1.20V, keeping power consumption and heat minimal
Intel XMP support makes it easy to set the rated 2400MHz speed without manual tuning
Distinctive red aluminum heatspreader aids heat dissipation and adds a visual accent to builds

👎 Cons

8GB total capacity is limiting for modern multitasking, gaming, or content creation workloads
2400MHz speed is entry-level by current DDR4 standards, with faster kits widely available
4GB per module leaves little headroom — upgrading later means replacing rather than adding sticks in a dual-slot board
Only available in red, which may clash with other color-themed builds

Frequently Asked Questions

What is the configuration of this 8GB kit — is it one stick or two?

This is a dual-channel kit consisting of two 4GB DDR4 modules (2x4GB), which enables dual-channel memory bandwidth when installed in matched slots.

What CAS latency does this Ripjaws V kit run at?

The kit is rated at CL15 with full timings of 15-15-15-35 at 1.20V.

Does this RAM require Intel XMP to reach its rated 2400MHz speed?

Yes, enabling Intel XMP in your motherboard BIOS will automatically configure the memory to run at the rated 2400MHz speed with the correct timings.

What voltage does the G.Skill F4-2400C15D-8GVR operate at?

It runs at 1.20V, which is the standard DDR4 voltage and does not require extra power or cooling considerations.

Will this memory fit under large CPU coolers?

The Ripjaws V series uses a moderate-height heatspreader design, though clearance should still be verified against tall tower coolers with low-hanging fans.