G.Skill
G.Skill F5-5600J2834F16GX2-RS5K Ripjaws S5 32GB (2x16GB) DDR5 5600MHz Desktop Memory
★★★★★
32GB of DDR5-5600 speed in a low-profile dual-channel kit built for Intel 12th through 14th Gen and Core Ultra platforms.
$97.99*
Check availability
*Price sourced from Amazon.com. Last updated:Jun 04, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Ripjaws S5 Series, designed for Intel 600/700/800 Series Chipset with 12th/13th/14th Gen Intel Core Series CPU or Intel Core Ultra 200 Series CPU
Brand: G.Skill, Series: RipJaws S5, Model: F5-5600J3036D16GA2-RS5K
32GB kit containing 2 x 16GB modules, DDR5-5600, 288-Pin, CAS Latency CL30 (30-36-36-89) at 1.25V (Intel XMP)
ECC: No, Dual Channel Kit, Recommended Use: High Performance or Gaming Memory
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Specifications
Brand
G.Skill
Series
RipJaws S5
Model
F5-5600J2834F16GX2-RS5K
Capacity
32GB (2x16GB)
Type
DDR5 SDRAM
Speed
DDR5-5600MHz
CAS Latency
CL28 (28-34-34-89)
Voltage
1.25V (XMP)
Form Factor
288-Pin DIMM
ECC
No
Channel
Dual Channel Kit
Platform Compatibility
Intel 600/700/800 Series Chipset (12th/13th/14th Gen Core, Core Ultra 200)
Heatspreader
Matte Black Aluminum, Low-Profile
Pros & Cons
👍 Pros
- 32GB (2x16GB) dual-channel configuration provides ample capacity for gaming, multitasking, and content creation
- DDR5-5600 speed with CL28 timings delivers strong bandwidth and responsive performance at a competitive latency
- Low-profile heatspreader design fits under tall CPU coolers and in compact cases without clearance issues
- Intel XMP-certified for one-click overclocking to rated speed without manual BIOS tuning
👎 Cons
- Designed and validated for Intel platforms only — AMD compatibility is not guaranteed or officially supported
- Reaching the full 5600MHz XMP speed depends on the specific motherboard and CPU combination used
- Non-ECC, so it is not suitable for workstation or server environments that require error-correcting memory
- The matte black heatspreader offers no RGB lighting for builders who want illuminated memory
Frequently Asked Questions
What Intel platforms is the RipJaws S5 DDR5-5600 kit designed for?
It is designed for Intel 600, 700, and 800 series chipset motherboards paired with 12th, 13th, or 14th Gen Intel Core processors, as well as Intel Core Ultra 200 series CPUs.
Do I need to enable XMP to reach the rated 5600MHz speed?
Yes, the kit boots at the default SPD speed out of the box. You must enable the Intel XMP profile in your motherboard's BIOS to reach the rated 5600MHz overclock speed.
Can I mix this kit with other memory modules?
No, G.Skill strongly advises against mixing memory kits. The two 16GB modules in this kit are matched and tested together; mixing with other modules can cause instability or system failure.
What is the CAS latency of this kit?
The kit is rated at CL28 with full timings of 28-34-34-89 when running at the XMP profile speed.
Does this memory support ECC?
No, this is non-ECC memory designed for consumer desktop platforms, not ECC workstation or server use.
Related Products
