G.Skill
G.Skill F5-5600J3036D32GA2-RS5K RipJaws S5 64GB DDR5 5600 RAM
★★★★★
64GB DDR5
A 64GB DDR5-5600 dual-channel kit built for high-capacity desktop builds with Intel XMP 3.0 overclocking support.
$184.99*
Check availability
*Price sourced from Amazon.com. Last updated:Jun 04, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
G.SKILL Ripjaws S5 Series DDR5 U-DIMM Memory Kit, Model: F5-5600J3036D32GA2-RS5K
64GB total capacity kit containing 2x32GB modules, rated for up to DDR5-5600 CL30-36-36-89 at 1.25V
Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming
Includes JEDEC default profile, and Intel XMP 3.0 memory overclock profile
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
For Intel Z890, Intel Z790, Intel Z690, Intel B760, Intel B660 platforms. Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.
Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.
Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP and/or EXPO overclock profile, enable XMP/EXPO/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP or EXPO overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP or EXPO is an act of overclocking and requires BIOS setting adjustments.
Reaching the rated XMP or EXPO overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
Specifications
Brand
G.Skill
Series
RipJaws S5
Model
F5-5600J3036D32GA2-RS5K
Memory Type
DDR5
Capacity
64GB (2 x 32GB)
Speed
5600 MHz
CAS Latency
CL30-36-36-89
Voltage
1.25V
Pin Count
288-Pin
Form Factor
U-DIMM (Non-ECC)
XMP Support
Intel XMP 3.0
Color
Matte Black
Compatible Platforms
Intel Z890, Z790, Z690, B760, B660
Pros & Cons
👍 Pros
- Large 64GB capacity across two 32GB modules supports memory-intensive workloads and multitasking
- DDR5-5600 speed with CL30 timings delivers strong bandwidth for gaming and productivity
- Intel XMP 3.0 profile allows one-click overclocking in BIOS without manual tuning
- Low-profile matte black heatspreader design fits under most tower CPU coolers without clearance issues
- Matched dual-channel kit is factory-tested together for verified stability
👎 Cons
- No AMD EXPO profile limits out-of-the-box overclocking optimization on AMD platforms
- Reaching rated XMP speeds depends on motherboard and CPU compatibility with no guarantee on all supported boards
- Cannot be mixed with other memory kits without risking system instability
- 1.25V operating voltage is slightly above DDR5 baseline which may matter for low-power builds
Frequently Asked Questions
What Intel platforms are compatible with this memory kit?
This kit is validated for Intel Z890, Z790, Z690, B760, and B660 platforms. Check G.Skill's QVL or RAM Configurator tool for specific motherboard compatibility.
Do I need to enable anything in BIOS to reach the DDR5-5600 speed?
Yes, the kit boots at JEDEC default speed out of the box. You must enable the Intel XMP 3.0 profile in your BIOS to reach the rated DDR5-5600 CL30 speed.
Can I mix this kit with other DDR5 memory I already own?
G.Skill strongly advises against mixing memory kits, as modules are matched and tested together. Mixing kits can result in system instability or failure.
Does this kit support AMD platforms with EXPO profiles?
This kit includes a JEDEC default profile and an Intel XMP 3.0 profile. It does not feature an AMD EXPO profile, though it may still function at JEDEC speeds on compatible AMD boards.
What is the voltage requirement for this memory?
The kit runs at 1.25V when the XMP profile is enabled, which is a standard voltage for DDR5 memory.
Related Products
