G.Skill

G.Skill Trident Z5 RGB 64GB DDR5 6400MHz Desktop Memory

64GB DDR5

Blazing DDR5-6400 speed and 64GB capacity make the G.Skill Trident Z5 RGB a top-tier choice for demanding desktops.

$1,299.99*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Oct 21, 2026.Price and availability are subject to change — details.

Affiliate Disclosure: As an Amazon Associate, Studio Supplies earns from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The G.Skill Trident Z5 RGB Series DDR5-6400 memory kit pairs two matched 32GB modules to deliver 64GB of high-speed DDR5 memory for demanding desktop systems. Rated at DDR5-6400 with CL32-39-39-102 timings and a 1.40V operating voltage, this kit is purpose-built for Intel platforms including Z890, Z790, and B760 chipsets. An Intel XMP 3.0 profile is included, allowing users to reach the full rated speed with a single BIOS toggle rather than manual overclocking. Out of the box, the kit boots at standard JEDEC default speeds for broad initial compatibility.

Beyond raw performance, the Trident Z5 RGB modules feature an integrated RGB lighting bar along the top edge, controlled through compatible motherboard software. The metallic silver heat spreader provides both thermal management and a clean aesthetic. With 64GB of total capacity in a dual-channel configuration, this kit is well suited for gaming at high resolutions, video editing, 3D rendering, and other memory-intensive workflows where both speed and capacity matter. As with all high-performance memory, users should consult G.Skill's QVL or RAM Configurator tool to confirm compatibility with their specific motherboard and CPU combination.

Key Features

* Requires overclocking/BIOS adjustments. Maximum speed and performance depends on system components, including motherboard and CPU.

G.SKILL Trident Z5 RGB Series DDR5 U-DIMM Memory Kit, Model: F5-6400J3239G32GX2-TZ5RS

Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming

Includes JEDEC default profile, and Intel XMP 3.0 memory overclock profile

Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.

For Intel Z890, Intel Z790, Intel B760 platforms. Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.

Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.

Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.

Visit the G.SKILL warranty policy webpage for more details.

Specifications

Series
Trident Z5 RGB
Model
F5-6400J3239G32GX2-TZ5RS
Capacity
64GB (2 x 32GB)
Memory Type
DDR5
Speed
DDR5-6400
CAS Latency
CL32 (32-39-39-102)
Voltage
1.40V
Pin Count
288-Pin
Form Factor
U-DIMM (Desktop)
Channel
Dual Channel
ECC
No
XMP Support
Intel XMP 3.0
Platform Compatibility
Intel Z890, Z790, B760
Color
Metallic Silver

Similar Products

Other products from the same family that visitors often consider:

Frequently Asked Questions

This kit includes Intel XMP 3.0 profiles and is validated for Intel Z890, Z790, and B760 platforms. While it may physically fit AMD DDR5 boards, G.Skill validates compatibility specifically for Intel chipsets with this model.
Yes. The kit boots at JEDEC default speeds out of the box. You must enable the Intel XMP 3.0 profile in your motherboard BIOS to reach the rated DDR5-6400 CL32 speed.
G.Skill strongly advises against mixing memory kits. These modules are tested and matched as a pair, and combining them with other kits can cause stability issues or system failure.
The rated XMP speed of DDR5-6400 runs at 1.40V, which is slightly above the DDR5 standard of 1.1V but typical for high-performance DDR5 overclocked kits.