Kiwee Broadband

Kiwee Broadband KB-G3-03 G.hn Coax-to-Ethernet Adapter Kit

Turn the coax already inside your walls into a 2.5GbE wired backbone that also delivers 30W of PoE+ power over the very same run

$129.99*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Aug 10, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Kiwee Broadband KB-G3-03 is a two-pack coax-to-Ethernet kit built for people who have coaxial TV wiring in the walls but weak Wi-Fi in the rooms that matter. Rather than drilling or pulling new cable, it repurposes that existing coax into a wired backbone using G.hn Wave 2 technology on a 200MHz profile, rated for PHY transmission speeds up to 1.6Gbps. Each adapter carries a 2.5G RJ45 port, which is the detail that sets this kit apart from older single-gigabit coax bridges: it is aimed squarely at homes moving to multi-gigabit fiber and Wi-Fi 6E or Wi-Fi 7 access points that can actually use the extra headroom.

What makes it genuinely versatile is PoE+. That same 2.5G port supplies up to 30 watts of IEEE 802.3at power, so a ceiling-mounted access point, an outdoor 4K or 8K IP camera, or a VoIP phone can draw data and power from one cable with no AC outlet at the mount. An integrated diplexer operating between 2 and 200MHz lets the network traffic coexist with satellite TV and UHF over-the-air HDTV on the same coax. Setup is described as a five-minute plug-and-play process with automatic discovery, AES-128 hardware encryption at the touch of a button, and the ability to scale a single coax domain to 16 adapters.

The important caveat is compatibility. This is a G.hn device, not DOCSIS, so it is designed for dark or dedicated coax, satellite lines, or UHF-only antenna setups — not a shared, active cable-internet line. VHF OTA channels 2 through 13 fall outside the diplexer's window, which antenna households should weigh before buying.

Key Features

COMPLETE 2-PACK STARTER KIT FOR INSTANT SETUP – Convert your home's existing coaxial TV wiring into an ultra-fast Multi-Gigabit wired network backbone. Includes two KB-G3-03 adapters, power supplies, coaxial cables, and Ethernet cables—everything needed to build a high-speed coaxial Ethernet bridge in minutes without drilling or pulling new cables.

DATA & 30W POWER OVER ONE CABLE (IEEE 802.3at PoE+) – The 2.5G RJ45 Ethernet port features Power over Ethernet (PoE+) support, delivering up to 30 Watts of power directly to connected devices. Perfect for powering ceiling-mounted Wi-Fi 6E/7 Access Points, outdoor 4K/8K IP security cameras, or VoIP phones without needing an AC power outlet at the installation location.

TRUE 2.5G MULTI-GIGABIT PERFORMANCE & G.hn WAVE 2 – Harnessing advanced G.hn Wave 2 technology (200MHz profile), this kit delivers physical PHY transmission speeds up to 1.6 Gbps over coax. Paired with 2.5GbE LAN ports, it ensures maximum throughput for gigabit and multi-gigabit fiber internet connections throughout your whole house.

INTERNET OVER COAX (NO DRILLING REQUIRED) – Effortlessly penetrate thick drywall, brick, and multi-story floor plans. Utilize coaxial TV cables already inside your walls to bring loss-free wired LAN to rooms where Wi-Fi fails, saving thousands on expensive professional cabling installation.

ULTRA-LOW LATENCY <1MS FOR GAMING & 8K STREAMING – Forget unstable Wi-Fi extenders or noisy Powerline (PLC) adapters. Enjoy rock-solid, low-latency connectivity (<1 ms) designed for competitive online gaming, high-bitrate 8K streaming, cloud backups, and seamless local NAS file transfers.

TV COEXISTENCE (SATELLITE & UHF OTA ANTENNA) – Operating between 2–200 MHz with an integrated diplexer, this adapter lets your network traffic run on the exact same coax cable alongside Satellite TV (DirecTV, DISH) and UHF Over-The-Air HDTV (470–608 MHz). Note: Incompatible with VHF OTA channels (Channels 2–13 / 54–216 MHz).

5-MINUTE PLUG & PLAY INSTALLATION – No IT knowledge, software, or router configuration required. Simply connect the coaxial cables, plug in the power adapters, and connect your devices via Ethernet cable—the adapters discover and auto-synchronize automatically.

AES-128 BIT HARDWARE ENCRYPTION – Protect your network privacy at the touch of a button. Integrated chip-level AES 128-bit hardware encryption reliably secures your data against unauthorized access—ideal for multi-family homes, apartments, or office buildings.

FUTURE-PROOF NETWORK BACKBONE – Easily scale your network by connecting up to 16 adapters within a single coaxial network domain. Build an uncompromising, wired Multi-Gigabit backbone to eliminate Wi-Fi dead zones permanently.

IMPORTANT: NOT DOCSIS COMPATIBLE – This adapter utilizes the G.hn standard and is NOT compatible with active DOCSIS cable internet (e.g., Comcast Xfinity, Spectrum, Cox) on the same shared line. Designed exclusively for dark/dedicated coax lines, UHF-only OTA antenna setups, or satellite TV lines

Specifications

Brand
Kiwee Broadband
Model
KB-G3-03
Technology
G.hn Wave 2 (200MHz profile)
Max PHY Speed
Up to 1.6Gbps over coax
Ethernet Port
2.5G RJ45 (2.5GbE)
PoE Support
IEEE 802.3at PoE+, up to 30W
Operating Frequency
2–200MHz with integrated diplexer
Encryption
AES-128 hardware encryption
Max Adapters Per Domain
Up to 16
Latency
Under 1ms
In the Box
2 adapters, power supplies, coax cables, Ethernet cables
Not Compatible With
Active DOCSIS cable internet; VHF OTA channels 2–13

Frequently Asked Questions

No. The KB-G3-03 uses the G.hn standard and is not DOCSIS compatible, so it cannot share an active cable-internet line from providers like Xfinity, Spectrum, or Cox. It needs a dark, dedicated, satellite, or UHF-only antenna line.
The 2.5G RJ45 port supports IEEE 802.3at PoE+ and delivers up to 30 watts, enough to power a ceiling access point, an outdoor 4K or 8K IP camera, or a VoIP phone over the same cable that carries data.
The kit uses G.hn Wave 2 on a 200MHz profile rated for PHY speeds up to 1.6Gbps over coax, paired with 2.5GbE ports. That physical rate is a ceiling, so real-world throughput after overhead will be somewhat lower.
Yes, with one limit. An integrated 2–200MHz diplexer lets network traffic coexist with satellite TV and UHF over-the-air HDTV, but it does not support VHF OTA channels 2 through 13.
Yes. The kit ships with two KB-G3-03 adapters, power supplies, coax cables, and Ethernet cables, and setup is a plug-and-play process where the adapters discover and auto-synchronize automatically.
Yes. A single coaxial network domain supports up to 16 adapters, so you can add units over time to extend the wired backbone to more rooms across the home.