Brands Guides About
Monoprice 103370 Cat5e Ethernet Cable 2ft Orange — main product image
Monoprice 103370 Cat5e Ethernet Cable 2ft Orange
Monoprice 103370 Cat5e Ethernet Cable 2ft Orange
Monoprice 103370 Cat5e Ethernet Cable 2ft Orange
Monoprice 103370 Cat5e Ethernet Cable 2ft Orange
Monoprice

Monoprice 103370 Cat5e Ethernet Cable 2ft Orange

★★★★★4.7 (1393 reviews)

Pure bare copper Cat5e patch cable delivers 350MHz bandwidth with gold-plated contacts in a compact 2-foot run.

$0.10*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 103370 is a 2-foot Cat5e UTP Ethernet patch cable built with 24AWG pure bare copper conductors and rated for 350MHz bandwidth. Pure copper is significant at this price tier — many budget cables substitute copper-clad aluminum (CCA), which increases resistance and can cause packet loss on longer runs or under sustained load. The 50-micron gold plating on the RJ45 connectors provides corrosion resistance and maintains low contact resistance across hundreds of plug-unplug cycles, which matters in environments where cables are frequently swapped.

At 2 feet, this cable is designed for short patch connections: switch-to-patch-panel links in a rack, device-to-wall-jack runs on a desk, or bridging adjacent equipment. It supports Gigabit Ethernet (1000BASE-T) comfortably within Cat5e specifications. The orange color and snagless strain relief boots make it easy to identify and manage in a rack full of cables. For users who need speeds above 1Gbps — such as 2.5GBase-T for Wi-Fi 6 access points — a Cat6 or Cat6a cable would be the appropriate step up, as Cat5e tops out at Gigabit.

Key Features

Electrical

Manufacturer: Monoprice

Country of Manufacturer: United States

Specifications

Brand
Monoprice
Model
103370
Cable Type
Cat5e
Conductor Material
Pure Bare Copper Wire
AWG
24AWG
Bandwidth
350MHz
Shielding
UTP (Unshielded Twisted Pairs)
Connector
RJ45, 50µm gold plated contacts
Length
2ft
Color
Orange
Strain Relief
Snagless, color matched

Pros & Cons

👍 Pros

  • Pure bare copper conductors ensure consistent signal quality without the degradation found in copper-clad aluminum alternatives.
  • 50-micron gold-plated RJ45 contacts resist corrosion and maintain reliable connection over repeated plug cycles.
  • 350MHz bandwidth provides headroom above the Cat5e baseline, supporting Gigabit Ethernet without signal integrity concerns.
  • Snagless strain relief boots protect the locking tab from breaking during insertion and removal in dense patch panel environments.

👎 Cons

  • Cat5e is limited to Gigabit Ethernet — it cannot support 2.5GBase-T or higher speeds that Cat6 and above handle.
  • UTP construction offers no electromagnetic shielding, making it unsuitable for high-interference industrial environments.
  • 2-foot length is very short, useful only for same-rack or adjacent-device connections with no routing flexibility.
  • No flat or slim profile option — standard round cable may be harder to route in tight spaces compared to flat patch cables.

Frequently Asked Questions

Yes. Cat5e supports Gigabit Ethernet (1000BASE-T) at distances up to 100 meters. At 2 feet, this cable is well within specification and will handle gigabit speeds without issue.
The 350MHz rating defines the maximum frequency the cable can carry signals at before crosstalk and attenuation degrade performance. For Ethernet, this exceeds the 100MHz minimum required for Cat5e and provides additional headroom for signal integrity on short runs.
Monoprice specifies 24AWG pure bare copper wire. Patch cables in this form factor are typically stranded for flexibility, which suits the short-run, device-to-switch connections this cable is designed for.
UTP (Unshielded Twisted Pairs) is the standard for most office and home network runs. Shielding is only necessary in environments with significant electromagnetic interference, such as adjacent to heavy machinery or industrial equipment. For typical rack, desk, and patch panel use, UTP is appropriate.
Yes. The connectors are standard RJ45 with 50-micron gold plating and snagless strain relief boots, compatible with any standard Ethernet port on switches, routers, patch panels, and network interface cards.

Related Products