Monoprice

Monoprice 103619 50ft SVGA Video Cable 2-Pack Ferrites

CL2-rated 50-foot dual-pack with ferrite shielding keeps VGA signal clean across long runs to projectors and monitors.

$59.49*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 103619 is a 50-foot CL2-rated Super VGA extension cable with HD15 (male-to-female) connectors, sold in a two-pack. At 28 AWG conductor gauge, the cable is sized for the signal-carrying demands of a 50-foot analog run — thicker than commodity VGA cables, which reduces resistive signal loss across the full length. The ferrite chokes clamped at each connector end filter out RF interference that accumulates over long cable runs, protecting against the horizontal noise bars and color banding that plague cheaper, unshielded alternatives. CL2 certification is a concrete technical credential: it means UL has verified this cable's jacket won't contribute to flame propagation in a wall cavity.

This cable is built for permanent AV infrastructure — conference rooms, classrooms, training facilities, and any installation where legacy VGA equipment needs to reach a distant display or projector without signal degradation. The 2-pack format suits dual-display rooms or any installer who wants an on-site spare. It won't help users who need audio transmission or who are running digital signals (HDMI, DisplayPort), but for its specific purpose — extending an analog VGA signal reliably over 50 feet in a building installation — it checks every practical box without overengineering the solution.

Specifications

Cable Type
Super VGA (HD15)
Connector Type
Male to Female
Length
50 Feet
Gauge
28 AWG
Rating
CL2 (In-Wall Rated)
EMI Suppression
Ferrite Chokes
Color
Black
Pack Size
2 Pack
Brand
Monoprice
Model
103619

Pros & Cons

👍 Pros

  • 50-foot reach eliminates the need for signal repeaters or active extenders in most single-room AV installations.
  • CL2 fire-safety rating permits in-wall routing without conduit, reducing installation complexity in permanent AV setups.
  • Ferrite chokes on both cables actively suppress high-frequency EMI that would otherwise introduce artifacts over long analog signal runs.
  • 28 AWG conductor gauge maintains signal integrity at this cable length for resolutions up to 1920x1080.
  • Male-to-female HD15 configuration extends any existing VGA cable, providing genuine flexibility in rack-mount and wall-plate scenarios.

👎 Cons

  • 28 AWG is adequate but not optimal for 50-foot runs at resolutions above 1080p — power users pushing 1600p or higher may see image softening at this length.
  • Analog VGA carries no audio signal regardless of cable quality — separate audio cabling is always required alongside these runs.
  • The male-to-female gender lock is fixed; users needing male-to-male or female-to-female runs must source separate gender adapters.
  • No shielding specification beyond ferrite chokes is listed — environments with heavy electrical interference (near motors, HVAC, fluorescent lighting) may still see residual noise.
  • VGA's analog bandwidth ceiling means this cable offers no upgrade path for display resolutions or refresh rates beyond what the VGA standard supports.

Frequently Asked Questions

CL2 (Class 2) is a UL fire-safety rating that certifies the cable's jacket meets the requirements for in-wall installation in residential and commercial buildings. This means you can route these cables through walls or ceilings without a conduit — a significant installation advantage over unrated cables.
Ferrites are passive EMI suppression components clamped onto the cable near the connectors. They act as high-frequency filters, absorbing and dissipating electromagnetic interference that can cause screen noise, rolling bars, or color degradation — particularly at 50-foot signal runs where interference accumulates.
VGA resolution support depends on the source device, not the cable. At 28 AWG gauge over 50 feet you can expect reliable support up to 1920x1080 at standard refresh rates, though signal quality at higher resolutions over extended lengths may show degradation compared to shorter runs.
Yes. The HD15 male-to-female configuration is the universal VGA connector standard. It will extend any existing VGA cable or connect directly between any VGA output (computer, media player, AV switcher) and any VGA input (monitor, projector, display).
The 2-pack delivers direct cost-per-cable savings for dual-display setups, training rooms requiring two projection points, or simply keeping a spare on hand. Both cables in the pack carry identical specifications and the same CL2 rating.