Monoprice

Monoprice 104998 Cat5e 30ft Red Ethernet Patch Cable

4.7 (1386 reviews)

Deliver reliable 350MHz Cat5e networking over 30 feet with gold-plated contacts and pure copper conductors.

$10.98*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 104998 is a 30-foot Cat5e patch cable built with 24AWG stranded pure bare copper wire, rated at 350MHz bandwidth and terminated with 50-micron gold-plated RJ45 connectors. In practical terms, this means the cable comfortably supports Gigabit Ethernet (1000BASE-T) at its full length with significant headroom. The pure copper specification matters — cheaper cables using copper-clad aluminum (CCA) exhibit higher resistance, which leads to signal degradation and unreliable PoE delivery. The stranded conductor design provides flexibility for routing between devices, patch panels, and switches in environments where cables are frequently handled.

This cable fits squarely in the patch-cable role: connecting a workstation to a wall jack, linking a switch to a router, or running from a patch panel to rack-mounted equipment. The 30-foot length covers most room-scale connections without excessive slack. UL 444 listing and TIA-568-C.2 compliance confirm it meets industry electrical performance standards, not just physical fit. For home networks, small office setups, and rack environments running at gigabit speeds, this is a reliable, cost-effective interconnect that does exactly what the spec sheet promises.

Key Features

Los cables de red Cat5e de longitud fija son la combinación perfecta de valor y rendimiento

Disponible en un gran surtido de colores y longitudes tenemos un cable para adaptarse a cada situación

La mayoría de los cables de presupuesto escatiman con sólo 10m

Specifications

Brand
Monoprice
Model
104998
Cable Type
Cat5e UTP (Unshielded Twisted Pair)
Length
30 feet
Color
Red
Conductor
24AWG Stranded Pure Bare Copper
Bandwidth
350MHz
Connector
RJ45
Contact Plating
50µm Gold (Short Body)
Strain Relief
Snagless, Color-Matched Boots
Compliance
UL Code 444, TIA-568-C.2

Pros & Cons

👍 Pros

  • 24AWG stranded pure bare copper conductors ensure full-spec signal integrity and PoE compatibility over the 30-foot run
  • 50-micron gold-plated RJ45 contacts resist corrosion and maintain low contact resistance over thousands of insertion cycles
  • 350MHz rated bandwidth provides comfortable headroom for gigabit Ethernet with margin to spare
  • Snagless strain relief boots protect the locking tab from breakage during cable pulls and rearrangement
  • UL 444 and TIA-568-C.2 compliance means verified electrical performance, not just a marketing claim

👎 Cons

  • Cat5e tops out at 1 Gbps — networks planning a 10 Gigabit upgrade path will need Cat6a or better
  • Unshielded (UTP) construction offers no protection in environments with significant electromagnetic interference from motors or power lines
  • At 30 feet the cable creates notable slack in short rack-to-device runs, and excess cable cannot be tightly coiled without risking crosstalk
  • Stranded conductors are not suitable for permanent in-wall or conduit installations where solid-core cable is required

Frequently Asked Questions

Cat5e supports up to 1 Gbps (1000BASE-T) at distances up to 100 meters. At 30 feet (roughly 9 meters), you are well within spec and will achieve full gigabit throughput without signal degradation.
Yes. The 24AWG stranded pure bare copper conductors can carry PoE (802.3af/at) power. Copper-clad aluminum (CCA) cables struggle with PoE delivery, but this cable uses pure copper, which handles both data and power reliably.
No. This is an unshielded (UTP) patch cable with stranded conductors and snagless boots — designed for device-to-switch connections in indoor environments. For in-wall runs you would need solid-conductor, riser-rated (CMR) or plenum-rated (CMP) cable.
For gigabit Ethernet, 350MHz is more than sufficient. The bandwidth limitation of Cat5e becomes relevant only if you attempt 10GBASE-T, which requires Cat6a. For 1 Gbps networks, this cable operates well within its rated capacity.