Monoprice

Monoprice 105576 Premium 3.5mm Stereo Audio Cable

4.5 (122 reviews)

Shielded 22AWG coaxial construction delivers clean, interference-free audio over a 3-foot 3.5mm stereo connection.

$5.54*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 105576 is a 3-foot 3.5mm stereo male-to-male audio cable built around individually shielded 22AWG coaxial conductors — a construction typically found in cables costing several times more. The shielding on each conductor independently blocks electromagnetic and radio-frequency interference, which translates to a cleaner signal path between your source and output device. Gold-plated TRS connectors on both ends resist oxidation, maintaining reliable electrical contact through hundreds of plug cycles. At 12mm x 6mm in cross-section, this cable is substantially thicker than commodity audio cables, reflecting its heavier gauge and shielding layers.

This cable is best suited for fixed desktop or studio installations where short, reliable interconnects are needed between a DAC and powered monitors, a laptop and a mixer input, or a headphone amp and a source device. The 3-foot length keeps cable runs tidy without excess slack. Professionals and hobbyists who have dealt with ground loop hum or RF interference bleeding into audio chains will appreciate the shielding, while the 22AWG gauge ensures minimal signal loss at the connectors. It is not the cable to throw in a travel bag — the stiff, thick profile is a trade-off for its durability and noise rejection — but for a permanent connection between components, it delivers clean audio at a fraction of boutique cable pricing.

Key Features

This cable features a male 3. 5mm stereo (TRS) plug on each end with molded connector housings and strain relief boots

The conductors are 22AWG and each conductor is shield to prevent EMI or RFI interference from entering your audio system

The cable is made of heavy-duty coaxial cable for each conductor.

The cable is 12mm x 6mm thick, while the connector housings are 41mm long x 15mm diameter.

Specifications

Connector Type
3.5mm Stereo Male (TRS) to 3.5mm Stereo Male (TRS)
Conductor Gauge
22AWG
Connector Plating
Gold Plated
Cable Construction
Heavy-duty coaxial, shielded conductors
Cable Thickness
12mm x 6mm
Connector Housing Length
41mm
Connector Housing Diameter
15mm
Cable Length
3 Feet
Color
Black

Pros & Cons

👍 Pros

  • Individually shielded coaxial conductors effectively reject EMI and RFI in electrically noisy environments
  • 22AWG conductor gauge provides lower resistance and improved durability over standard 26-28AWG audio cables
  • Gold-plated connectors resist corrosion for consistent contact quality over years of repeated plug cycles
  • Molded strain relief boots at each connector reduce flex damage at the most failure-prone point
  • Heavy-duty build quality at a budget price point typical of Monoprice's direct-to-consumer model

👎 Cons

  • 12mm x 6mm cable profile is bulky for portable use and awkward to route in tight desktop setups
  • 3-foot length limits placement flexibility and may be too short for rack-to-desk or component-to-speaker runs
  • Molded connectors cannot be repaired or re-terminated if damaged
  • No right-angle connector option, which can create strain when plugged into devices with side-mounted jacks

Frequently Asked Questions

Any device with a standard 3.5mm stereo (TRS) output or input — laptops, phones, headphone amplifiers, powered speakers, car aux ports, and audio interfaces. The TRS connector carries left, right, and ground signals.
Yes. Each conductor is individually shielded with a coaxial construction, which blocks electromagnetic and radio-frequency interference. You'll notice the difference in environments with nearby power supplies, monitors, or wireless devices that typically introduce hum or buzz into unshielded runs.
For a 3-foot run, 22AWG is more than sufficient. Signal degradation over this length is negligible. The heavier gauge primarily contributes to durability and lower resistance, which helps maintain signal integrity at the connector joints.
Gold plating prevents oxidation and corrosion at the contact points, which maintains a reliable connection over time. The audible benefit is longevity of a clean signal rather than an immediate sound quality boost over nickel or chrome plating.
The cable is noticeably stiffer than thin patch cables due to its coaxial construction. It bends easily enough for desktop routing but is not ideal for tight spaces or portable use where a slim cable would be preferable.