Brands Guides About
Monoprice 106385 Fiber Optic Cable - 1 Meter LC-LC — main product image
Monoprice 106385 Fiber Optic Cable - 1 Meter LC-LC
Monoprice 106385 Fiber Optic Cable - 1 Meter LC-LC
Monoprice 106385 Fiber Optic Cable - 1 Meter LC-LC
Monoprice

Monoprice 106385 Fiber Optic Cable - 1 Meter LC-LC

★★★★★4.8 (39 reviews)

OM3 50/125 multimode fiber delivers verified 10 Gigabit throughput across a 1-meter LC-LC link with zero EMI sensitivity.

$11.99*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 106385 is a 1-meter OM3 50/125 multimode fiber patch cable with LC duplex connectors on both ends, rated for 10 Gigabit Ethernet operation. OM3 multimode fiber — with its 50-micron core and laser-optimized design — supports 10GBASE-SR transmission at up to 300 meters, meaning this 1-meter run operates at a fraction of the medium's theoretical limits. The duplex configuration provides simultaneous bidirectional 10 Gbps throughput, and the OFNR-rated jacket meets riser fire code classification for permanent building installations. Electrical isolation is inherent to fiber: unlike copper patch cables, this link is entirely immune to electromagnetic interference, ground loops, and conducted noise from adjacent power infrastructure.

At 1 meter, this cable is purpose-built for same-rack connections: top-of-rack switch to server, patch panel to switch, or NIC to storage array. It fits into any 10G-capable data center or home lab environment where SFP+ SR transceivers are in use. The LC duplex interface is the de facto standard on 10G SFP+ hardware from Cisco, Mellanox, Intel, and virtually every other vendor, making compatibility concerns minimal. This is not a cable for long structured cabling runs — for those, OM3 or OM4 bulk fiber with proper termination is appropriate. But for clean, short 10G interconnects inside a rack, the 106385 does exactly what the spec sheet says.

Specifications

Brand
Monoprice
Model
106385
Length
1 Meter
Connector Type
LC to LC Duplex
Fiber Type
OM3 Multimode
Core/Cladding
50/125 µm
Maximum Data Rate
10 Gbps
Duplex
Yes (Full Duplex)
Jacket Rating
OFNR (Optical Fiber Non-conductive Riser)

Pros & Cons

👍 Pros

  • 50/125 OM3 multimode core delivers verified 10 Gbps bandwidth over the full 300-meter specification — at 1 meter, there is zero distance-related signal degradation
  • LC duplex connectors are the dominant interface on modern 10G SFP+ transceivers, switches, and patch panels, ensuring broad compatibility
  • OFNR jacket rating satisfies riser-rated fire code requirements for permanent in-wall or between-floor installations
  • Complete electrical isolation eliminates ground loop interference and EMI susceptibility — a measurable advantage over copper in electrically noisy environments
  • Duplex configuration provides simultaneous full-duplex 10 Gbps transmission without half-duplex penalty

👎 Cons

  • 1-meter length is only appropriate for same-rack or directly adjacent device connections — any run beyond arm's reach requires a longer cable
  • OM3 multimode fiber is not compatible with single-mode (OS1/OS2) transceivers — mixing fiber types will result in no link
  • LC connectors are fragile relative to copper RJ45 — the push-pull tab can break under aggressive handling or repeated connection cycles in high-density patch environments
  • Requires compatible SFP+ 10G SR transceivers at both ends to achieve rated 10 Gbps; the cable alone does not provide any active signal amplification

Frequently Asked Questions

The cable itself is passive and protocol-agnostic — it will physically connect any LC-compatible SFP or SFP+ transceiver. However, to achieve 10 Gbps, both endpoints must use 10G SFP+ transceivers (e.g., SR type rated for OM3). Running it with 1G SFP optics works fine but caps throughput at 1 Gbps.
OM3 multimode fiber supports 10 Gbps (10GBASE-SR) at up to 300 meters. At 1 meter, distance is irrelevant to performance — this cable operates well within every bandwidth-distance constraint for the OM3 standard.
OFNR (Optical Fiber Non-conductive Riser) means the jacket is rated for vertical runs inside building walls and between floors — it meets fire safety codes for riser applications. For patch panel runs in a rack or server room, OFNR is compliant with most data center cabling standards without requiring the more expensive OFNP (plenum) rating.
OM3 supports 40GBASE-SR4 up to 100 meters and 100GBASE-SR10 up to 100 meters using parallel optics (MPO connectors). This specific cable uses LC duplex connectors, which are not compatible with parallel-optic MPO transceivers. For 40G/100G use, an MPO-terminated OM3 or OM4 cable would be required.

Related Products