
Monoprice
Monoprice 106520 Moonrise Fixed TV Wall Mount - 10-26" TVs
★★★★★
100x100
A flush-to-wall fixed mount that puts small-to-mid TVs exactly 17mm from the surface — clean, permanent, and rated for panels up to 30 lbs.
$19.99*
Check availability
*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
This high quality low profile wall mount sits a super slim 17mm from the wall
Will support VESA compliant displays with mounting patterns up-Inch 100x100
Low profile design that sits less than an inch from the wall
Specifications
Mount Type
Fixed TV Wall Mount
TV Size Compatibility
10-26 inches
VESA Compliance
Up to 100x100
Profile from Wall
17mm
Pros & Cons
👍 Pros
- 17mm profile is genuinely slim — the TV sits nearly flush against the wall, delivering a clean built-in aesthetic without a full in-wall installation.
- 30 lb weight rating comfortably covers most TVs in the 10–26 inch size range, including older panels that skew heavier than modern displays.
- Fixed design eliminates the mechanical complexity and long-term loosening that can affect tilting and articulating mounts over time.
- VESA 100×100 compatibility covers the standard mounting pattern for the vast majority of small TVs and monitors in this size class.
- Low purchase price makes it viable for multi-unit installations — digital signage, kitchen TVs, or secondary room displays where cost-per-mount matters.
👎 Cons
- Zero adjustment capability after mounting — if the installation angle is off or viewing needs change, the bracket must be physically repositioned on the wall.
- VESA support tops out at 100×100mm, which excludes a number of 24–26 inch monitors and TVs that use 200×100 or 200×200 patterns.
- 26-inch maximum size ceiling limits this to secondary and specialty installations — it's not a solution for a living room primary display.
- No cable management features are included, so wiring behind a nearly flush-mounted TV requires separate planning to avoid visible cable runs.
- The near-wall proximity (17mm) can make cable routing behind the TV awkward after installation, particularly for ports that face rearward.
Frequently Asked Questions
What is the maximum TV size and weight this mount supports?
The 106520 supports TVs from 10 to 26 inches with a maximum weight capacity of 30 lbs. Panels within that size range but heavier than 30 lbs are not compatible — verify your TV's weight before mounting.
What VESA mounting patterns does this bracket accommodate?
The mount supports VESA patterns up to 100×100mm. TVs with larger VESA patterns — 200×200 or above, common on 32-inch and larger panels — are not compatible with this bracket.
How far does the TV sit from the wall?
The low-profile design holds the TV just 17mm (approximately 0.7 inches) from the wall surface. This is one of the slimmer profiles available in fixed mounts for small TVs — it creates a near-flush appearance.
Does this mount allow any tilt or swivel adjustment after installation?
No — this is a fixed mount with no tilt, swivel, or articulation. The TV position is locked at installation. If viewing angle flexibility is needed, a tilting or full-motion mount would be the appropriate alternative.
What wall types is this mount compatible with?
The mount can be installed on standard stud-framed walls and concrete or masonry surfaces with appropriate anchors. Hardware requirements will vary by wall type; confirm anchor specifications with a hardware professional for non-stud installations.