
Monoprice
Monoprice 107147 3.5mm to RCA Gold Adapter
★★★★★
Gold-plated contacts and a male 3.5mm-to-female RCA conversion in a sub-inch adapter — the Monoprice 107147 bridges the analog audio gap between modern devices and legacy equipment without signal compromise.
$10.49*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
It is a reliable and efficient product for you
Package Dimensions: 0.762 H x 4.318 L x 1.777 W (centimetres)
Package Weight: 0.022 pounds
Country of Origin : China
Specifications
Package Height
0.762 cm
Package Length
4.318 cm
Package Width
1.777 cm
Package Weight
0.022 pounds
Country of Origin
China
Pros & Cons
👍 Pros
- Gold-plated contacts resist oxidation at the connection interface, maintaining electrical continuity over years of intermittent use without signal degradation from corrosion.
- Compact form factor — measuring under 5cm in overall length — makes it a practical addition to a cable kit without adding meaningful bulk or weight.
- Passive design means no power source, no drivers, and no latency — the signal passes through without any active processing or impedance transformation.
- Works bidirectionally for both input and output signal routing, covering a broad range of connection scenarios with a single adapter.
- Monoprice's consistent quality control at this price tier makes the 107147 a reliable bulk purchase for AV installers, educators, and system integrators who need spares on hand.
👎 Cons
- A single RCA female output means this adapter carries only a mono signal — stereo separation requires a separate Y-cable, which the adapter does not include or replace.
- No strain relief on the 3.5mm plug end makes the adapter vulnerable to damage at the joint if cables are pulled or bent repeatedly at an angle.
- The physical length of the adapter adds a small but real stress point at the 3.5mm jack on thin devices like tablets or phones if a heavy RCA cable is plugged directly into it.
- Passive impedance characteristics are fixed — there is no matching circuit, so in signal chains where input/output impedances differ significantly, some level loss is possible.
- Product documentation and packaging are minimal, which can lead to buyer confusion about channel behavior (stereo vs. mono) without prior knowledge of the signal type.
Frequently Asked Questions
What exactly does this adapter convert — which end is which?
It converts a male 3.5mm stereo plug to a female RCA jack. That means a device with a 3.5mm output (phone, laptop, audio interface) can plug into an RCA cable or device using this adapter as the go-between.
Does this adapter support stereo audio or only mono?
The 3.5mm plug side is stereo (left and right channels), but a single RCA jack is inherently mono. To maintain full stereo separation, you would need a Y-splitter cable that breaks the 3.5mm signal into two separate RCA outputs — this adapter alone does not split the channels.
Will this adapter work for both audio input and output connections?
Yes. The adapter is a passive electrical connector with no direction-specific components — it works for routing a 3.5mm source into an RCA input or adapting an RCA output to feed a 3.5mm input, depending on how your signal chain is wired.
Does the gold plating provide any measurable signal improvement?
Gold plating primarily prevents oxidation on contact surfaces rather than improving signal transmission in a measurable way. For short-run passive audio connections, gold-plated contacts ensure a clean, corrosion-resistant connection over time — particularly useful in infrequently-connected applications.
Is this adapter compatible with balanced audio connections?
No. Both 3.5mm TRS and RCA are unbalanced consumer-level audio standards. This adapter operates entirely within the unbalanced signal domain and is not suitable for balanced professional audio connections.