Monoprice

Monoprice 107623 20M Fiber Optic Cable LC/LC Multi-Mode

5.65 lbs

OM3 duplex fiber at 20 meters — delivers full 10GbE bandwidth with complete immunity to electrical interference across longer inter-rack runs.

$24.65*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Aug 31, 2026.Price and availability are subject to change — details.

Affiliate Disclosure: As an Amazon Associate, Studio Supplies earns from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 107623 is a 20-meter OM3 multimode duplex fiber patch cable with LC/LC connectors, rated for 10 Gigabit Ethernet. The OM3 fiber grade specifies a minimum modal bandwidth of 2000 MHz·km at 850 nm — the VCSEL wavelength used by SFP+ SR transceivers — which means the fiber's light-carrying capacity is engineered specifically for laser-based 10GbE transmission, not legacy LED-driven 1GbE. At 20 meters, the cable operates well within the physics of OM3: insertion loss at this distance is typically under 1 dB including connector losses, leaving substantial link budget margin for real-world connector contamination and aging. The OFNR jacket is UL 1666-listed, authorizing use in building risers where fire code requires rated cabling.

The 107623 targets network installers and IT administrators building 10GbE switched infrastructure in environments where copper is impractical — server rooms with high electromagnetic noise, runs adjacent to power distribution equipment, or any installation where ground loops on copper Ethernet would be a concern. The 20-meter length is the practical step up from 15-meter patch cables, covering two-rack spans, MDF-to-IDF connections within a single floor, or any run where cable tray routing adds distance beyond a direct line-of-sight measurement. There is no configuration, no drivers, and no active components — performance is entirely determined by the fiber grade and connector quality, both of which Monoprice sources to OM3 specification.

Key Features

country of origin :China

Package Weight: 5.65 lbs

Package Dimensions: 14.223 L x 2.54 H x 17.78 W (cm)

Product type:ELECTRONIC CABLE

Specifications

Country of Origin
China
Product Type
ELECTRONIC CABLE
Package Weight
5.65 lbs
Package Length
14.223 cm
Package Height
2.54 cm
Package Width
17.78 cm

Frequently Asked Questions

This OM3 50/125 µm multimode cable is rated for 10 Gigabit Ethernet at distances up to 300 meters. At 20 meters, you're operating at 6.7% of that maximum reach — attenuation and modal dispersion are non-issues at this length.
The additional 5 meters matters when connecting equipment in non-adjacent racks or routing cable through overhead trays. The 20-meter length accommodates longer cabinet-to-cabinet runs and provides enough slack to re-route without purchasing a new cable if your rack layout changes.
Yes. LC duplex is the standard connector for SFP+ short-range (SR) multimode transceivers operating at 850 nm. Any 10GbE switch or NIC with an SFP+ cage and SR optics will accept this cable directly.
OFNR (Optical Fiber Non-conductive Riser) meets UL 1666 requirements for vertical cable runs through building floors and risers. It is appropriate for in-wall and in-riser installation where local fire code requires a rated jacket — though plenum-rated (OFNP) is required in air-handling ceiling spaces.
Not with this LC/LC connector configuration. 40GBASE-SR4 and 100GBASE-SR10 require MPO/MTP multi-fiber connectors. This cable is purpose-built for 10GbE (and lower-speed) LC-connected applications.