
Monoprice
Monoprice 109835 Flexboot Cat6 10ft Ethernet Cable White
★★★★★
550MHz bandwidth and pure bare copper conductors in a 10-foot patch cable that won't be the bottleneck in your Gigabit or 10GbE network run.
$10.76*
View on Amazon
✓ In Stock on Amazon.com
Price history
*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
Unshielded Twisted Pairs (UTP).
550MHz bandwidth.
50µm gold plated contacts
Color matched, snagless strain relief boots.
Specifications
Cable Type
Category 6 (CAT6)
Bandwidth
550MHz
Wire Gauge
24AWG
Wire Material
Pure Bare Copper
Connector Type
RJ45
Contact Plating
50µm Gold
Shielding
UTP (Unshielded Twisted Pair)
Length
10 ft
Color
White
Boot Design
Flexboot Snagless Strain Relief
Warranty
Lifetime
Pros & Cons
👍 Pros
- 550MHz bandwidth rating exceeds the Cat6 standard minimum, providing SNR headroom that maintains signal integrity even in denser patch environments with higher crosstalk potential
- 24AWG pure bare copper wire construction ensures consistent low DC resistance across the 10-foot length, avoiding the impedance irregularities introduced by copper-clad aluminum (CCA) alternatives
- 50µm gold-plated RJ45 contacts provide corrosion resistance that maintains connection reliability over years of service in variable humidity environments
- Flexboot snagless strain-relief boot protects the RJ45 latch tab from breakage during repeated insertions in densely packed patch panels or switch bays
- Monoprice Lifetime Warranty on all cables removes the long-term replacement cost risk for infrastructure installations where a failed cable means rewiring and downtime
👎 Cons
- UTP construction provides no EMI shielding — unsuitable for runs near high-power electrical equipment, fluorescent lighting conduit, or industrial motor environments without upgrading to STP Cat6
- 10-foot fixed length means it cannot serve longer rack-to-device runs — routing around physical obstacles in a server or media rack often requires a 15-foot or longer cable to avoid excessive tension
- Cat6 is rated for 10GbE only up to approximately 37 meters — this cable's 10-foot length is well within that limit, but specifying Cat6 for a 40-meter run would require Cat6A
- The white color, while clean in appearance, shows soiling and discoloration more visibly than black or gray cables in high-traffic patch environments over time
- No locking connector or keyed variant is available for environments requiring tamper-resistant or accidental-removal-resistant patch connections
Frequently Asked Questions
What's the actual performance difference between Cat5e and this Cat6 cable for Gigabit Ethernet?
For standard Gigabit Ethernet (1000BASE-T), both Cat5e and Cat6 deliver identical throughput — Gigabit is fully supported on Cat5e. The difference is headroom: Cat6's 550MHz bandwidth rating (versus Cat5e's 100MHz) provides significantly lower crosstalk and better signal integrity, which matters for longer runs, densely patched panels, and 10GbE (10GBASE-T) connections up to 37 meters. If you're building for longevity or running 10GbE equipment, Cat6 is the correct specification.
Does the "Flexboot" in the name indicate anything about the cable's physical construction?
Yes — Flexboot refers to the snagless strain-relief boot design, which is color-matched and flexible enough to insert and remove from densely packed switch ports or patch panels without catching on adjacent connectors. The boot protects the RJ45 latch from snapping off during repeated insertions, which is the most common failure mode for patch cables in high-density environments.
Are the 50µm gold-plated contacts actually necessary, and what do they provide?
Gold plating at 50 microns provides meaningful corrosion resistance for RJ45 contacts, which are exposed metal surfaces subject to oxidation in humid environments. Oxidized contacts introduce intermittent signal loss that is notoriously difficult to diagnose. For a patch cable that will be in service for years, the gold plating is a legitimate engineering specification rather than marketing detail.
Does the UTP (unshielded) construction cause any interference problems in typical environments?
In standard office, home, or studio environments, UTP Cat6 performs without issue. UTP becomes a liability only in environments with significant EMI sources — near high-voltage power lines, industrial motor equipment, or running in the same conduit as power cables. For those environments, STP (shielded twisted pair) Cat6 is appropriate. The 24AWG pure bare copper conductors in this cable provide adequate signal integrity for UTP in normal deployments.
Does Monoprice's Lifetime Warranty actually cover this cable in practice?
Monoprice's Lifetime Warranty on cables covers manufacturing defects — physical failures in the cable construction or connectors. It doesn't cover accidental damage (cuts, crushing, sharp bends). In practice, Monoprice's warranty service has a strong reputation for hassle-free replacement on genuinely defective cables, which is relevant for infrastructure runs where a single defective cable can take hours to diagnose and replace.