Monoprice

Monoprice 111265 1ft Cat5e Ethernet Patch Cable Green

4.7 (834 reviews)

Monoprice's lifetime-warranted 1ft Cat5e patch cable delivers 350MHz bandwidth and gold-plated contacts in a snagless form factor built for tight rack runs.

$6.49*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 111265 is a 1-foot Cat5e UTP patch cable built around 24AWG stranded pure bare copper conductors rated to 350MHz — roughly 3.5 times the bandwidth floor required for 1000BASE-T Gigabit Ethernet. At this length, the cable operates well below any meaningful insertion loss or near-end crosstalk (NEXT) threshold defined by the TIA-568 Cat5e specification. The 50 microinch gold plating on the RJ45 contacts is the critical long-term reliability factor: it prevents the contact oxidation that degrades cheaper cables after repeated insertions in high-density environments.

This cable is engineered specifically for the short-run patch application — connecting a patch panel port to a nearby switch port, or jumping between adjacent rack-mounted devices. The 1-foot length keeps cable trays clean, and the green color coding maps cleanly to standard network color-coding conventions. The snagless boot design prevents the latch from catching on neighboring cables during blind insertions into crowded patch panels, which is a real operational advantage in any rack with more than a few dozen ports. The Flexboot-adjacent construction also means this cable tolerates the tight bend radii that come with dense 1U spacing better than stiffer solid-core alternatives.

Key Features

Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Unshielded Twisted Pairs (UTP)

350MHz bandwidth

50m gold plated contacts

Color matched, snagless strain relief boots

Specifications

Cable Type
Cat5e Ethernet Patch Cable
Length
1 foot
Color
Green
Shielding
Unshielded Twisted Pairs (UTP)
Bandwidth
350MHz
Connector Contacts
50m gold plated
Strain Relief
Color matched, snagless boots
Warranty
Lifetime Warranty on all Cables

Pros & Cons

👍 Pros

  • 350MHz bandwidth rating exceeds Gigabit Ethernet's 100MHz requirement, leaving ample headroom for reliable signal integrity.
  • 50 microinch gold-plated contacts resist oxidation and maintain low-resistance connections across repeated insertions.
  • Stranded pure bare copper conductors provide flexibility for repeated repositioning without conductor fatigue.
  • Snagless strain relief boot protects the RJ45 latch clip during cable routing in dense rack environments.
  • Lifetime warranty from Monoprice backs the build quality with no defined expiration date.

👎 Cons

  • UTP construction offers no shielding — unsuitable for electrically noisy environments with significant EMI sources near cabling runs.
  • At 1 foot, this cable has a very specific use case; it is not a general-purpose patch cable and offers no flexibility for longer runs.
  • 24AWG stranded construction is not rated for in-wall or plenum installation — patch use only.
  • Cat5e tops out at 1Gbps over 100 meters; this cable does not support 10GBASE-T, which requires Cat6A or better.

Frequently Asked Questions

This cable is rated for 350MHz bandwidth, which comfortably exceeds the 100MHz minimum required for Gigabit Ethernet (1000BASE-T). At 1 foot, signal integrity is a non-issue — the short run means virtually zero attenuation or crosstalk degradation.
Yes. At 1 foot, this is purpose-built for short rack-to-rack or patch panel-to-switch jumps where a longer cable would create cable management chaos. The snagless boot protects the RJ45 latch from snagging on adjacent cables during routing.
Stranded conductors use multiple thin copper strands twisted together, making the cable more flexible and bend-tolerant than solid-core wire. For a patch cable that gets moved or repositioned regularly, stranded construction resists conductor fatigue far better than solid wire would.
Yes — Monoprice specifies 50 microinch gold plating on the contacts. This thickness is the industry standard for patch cable connectors, providing corrosion resistance and reliable contact over thousands of insertions.
Color coding is a network management convention, not a technical differentiator. Green is commonly used to denote standard data ports or a specific VLAN segment. The color-matched snagless boot ensures the designation is immediately visible even in dense patch panels.