Monoprice

Monoprice 111365 Cat5e Ethernet Cable 75ft Blue

4.7 (834 reviews)

75 feet of pure bare copper Cat5e delivers full gigabit throughput across the room — or across the building.

$17.11*
Check availability

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 111365 is a 75-foot Cat5e UTP patch cable built to the full electrical specification: 24AWG pure bare copper conductors, 350MHz bandwidth, and gold-plated RJ45 connectors. The 350MHz rating means this cable supports Gigabit Ethernet (1000BASE-T) across its entire 75-foot span — the maximum distance for Cat5e is 100 meters, and 75 feet sits comfortably inside that ceiling. Pure bare copper is the load-bearing spec here: it has lower resistance per unit length than copper-clad aluminum, which matters progressively more as cable runs get longer. At 75 feet, a CCA cable is measurably worse; pure copper is simply the right material for a run this long.

This cable is built for fixed infrastructure runs — connecting a workstation to a distant wall port, bridging floors in a small office, or reaching a switch in a server closet from a device across the room. The snagless strain relief boots protect the RJ45 tab during the more demanding installation process a longer cable requires, and the blue color-coding makes it easy to identify in a structured cabling environment. As a pre-terminated patch cable it works best for accessible point-to-point runs rather than in-wall permanent installation. Monoprice backs every cable with a lifetime warranty — for an infrastructure component you plan to route and forget, that's a meaningful assurance that the company stands behind its spec claims.

Key Features

Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Unshielded Twisted Pairs (UTP)

350MHz bandwidth

50m gold plated contacts

Color matched, snagless strain relief boots

Specifications

Cable Type
Cat5e Ethernet Patch Cable
Construction
Unshielded Twisted Pairs (UTP)
Bandwidth
350MHz
Wire Gauge
24AWG
Wire Material
Pure Bare Copper
Connectors
RJ45
Contact Plating
50-Micron Gold
Length
75 ft
Color
Blue
Warranty
Lifetime

Pros & Cons

👍 Pros

  • 75-foot length covers cross-room and floor-to-floor runs that short patch cables can't reach without daisy-chaining — a single unbroken cable always beats a chain of shorter ones.
  • Pure bare copper 24AWG wire maintains full Cat5e electrical spec over the entire length without the resistance increase that degrades longer CCA cable runs.
  • 350MHz bandwidth rating fully supports Gigabit Ethernet with significant headroom over the minimum required bandwidth for the standard.
  • Snagless strain relief boots protect the RJ45 locking tabs during the more demanding routing process a 75ft cable requires.
  • Monoprice lifetime warranty backs both the cable and connectors — meaningful for infrastructure you're routing and don't plan to replace.

👎 Cons

  • At 75 feet this cable is unwieldy to route neatly — excess cable needs management, and the sheer length makes it impractical in tight equipment racks or desktop setups.
  • UTP construction offers no EMI shielding, which becomes a more relevant limitation over longer runs passing near electrical interference sources.
  • 350MHz Cat5e does not support 10 Gigabit Ethernet — if you're building toward a 10GbE network, this cable will need to be replaced with Cat6A.
  • As a pre-terminated patch cable it cannot be used for permanent in-wall installation the way bulk solid-core cable can.

Frequently Asked Questions

Yes. Cat5e supports Gigabit Ethernet (1000BASE-T) up to 100 meters — 75 feet is well within that limit. At 350MHz bandwidth with pure bare copper conductors, this cable won't be the bottleneck on a gigabit link.
UTP is adequate for most indoor runs at this length in standard office or home environments. In environments with heavy EMI sources — near fluorescent lighting banks, large motors, or dense power cabling — shielded (STP/FTP) cable is the more appropriate choice.
At 75 feet, the difference between pure bare copper and copper-clad aluminum becomes more noticeable. CCA has higher resistance per foot, and over a longer run that compounds — particularly for PoE devices drawing power through the cable. Pure copper is the correct spec for runs beyond 25–30 feet.
On a permanent run you won't be plugging and unplugging repeatedly, but the snagless design also protects the tab during initial routing — threading a 75ft cable through walls, drops, or cable trays puts mechanical stress on the connector that snagless boots help absorb.
This is a patch cable, not bulk cable — it has pre-terminated RJ45 ends and is not designed to be punched down to a keystone. It works for device-to-switch runs in open environments, but for in-wall structured cabling you'd use bulk solid-core Cat5e terminated to keystones.