Monoprice

Monoprice 142085 Right Angle Power Cord 2ft

4.8 (380 reviews)

Solve tight-space power connections with this heavy-duty 14AWG right-angle cord in a compact 2-foot length.

$12.53*$19.19Save 34%
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 15, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice 142085 Right Angle Power Cord is a 2-foot cable designed for equipment installations where space behind devices is limited. The 90-degree IEC 60320 C13 connector allows the cord to exit the device parallel to the rear panel rather than protruding straight out, which can save several inches of clearance in server racks, wall-mounted setups, and crowded desk configurations. The opposite end terminates in a standard grounded NEMA 5-15P three-prong plug compatible with any North American 125V AC outlet, UPS, or power distribution unit.

Despite its compact length, this cord is built with 14AWG conductors — heavier than the 16AWG or 18AWG wire found in many standard power cables. This supports a full 15-amp, 1875-watt capacity, making it appropriate for workstations, large monitors, laser printers, and other devices with higher power demands. The cord is manufactured to the same electrical safety standards as longer, straight-connector power cables, so the right-angle design and short length do not come at the expense of reliability. It is a straightforward cable solution for anyone dealing with cramped power connections and excess cord length behind their equipment.

Key Features

Works with most PCs, monitors, scanners, and printers.

Features a 90 degree C13 connector (PC side), which allows for better placement in tight situations.

Made to the same stringent standards as are standard PC power cables with the convenience of an angled connector.

Features a standard, grounded NEMA 5-15P plug on one end and an IEC 60320 C13 connector on the other end.

Simply mate the female C13 connector with the male C14 connector on your device or power adapter, then plug the NEMA connector into a nearby AC power outlet, UPS, or other AC power source.

Specifications

Plug Type
NEMA 5-15P (Grounded)
Connector Type
Right Angle IEC 60320 C13
Wire Gauge
14AWG
Amperage
15 Amp
Wattage
1875 Watt
Voltage
125 Volt
Length
2 Feet
Color
Black

Pros & Cons

👍 Pros

  • Right-angle C13 connector fits cleanly in tight spaces behind equipment and against walls
  • 14AWG wire gauge supports up to 15 amps and 1875 watts for high-draw devices
  • Short 2-foot length reduces cable clutter in rack and desk setups
  • Grounded NEMA 5-15P plug meets standard safety requirements
  • Built to the same standards as full-length power cords with no compromises on capacity

👎 Cons

  • 2-foot length is too short for setups where the outlet is not immediately adjacent
  • Right-angle orientation may conflict with neighboring ports or connectors on some devices
  • Only available in black, which may not match all equipment aesthetics
  • Single fixed angle direction may not suit every mounting orientation
  • Does not include any cable management clips or ties

Frequently Asked Questions

It works with most devices that use a standard IEC 60320 C13 power inlet, including PCs, monitors, scanners, printers, and network equipment.
The C13 connector is angled at 90 degrees to allow the cord to route flat against walls or surfaces, improving cable management in tight spaces behind equipment.
The 14AWG gauge supports up to 15 amps and 1875 watts, providing a thicker conductor than the more common 18AWG or 16AWG cords. This allows it to safely handle higher-draw devices.
Yes, the NEMA 5-15P plug is a standard three-prong grounded connector that fits any standard North American 125V AC outlet, UPS, or power distribution unit.
The 2-foot length is designed for situations where the power outlet or UPS is immediately behind or beside the equipment. For setups requiring more reach, a longer cord would be needed.