Monoprice

Monoprice 115140 SlimRun Cat6A Ethernet Cable 7ft 5-Pack

4.8 (3383 reviews)

Monoprice SlimRun Cat6A 7ft Ethernet cables deliver 10G speeds at half the diameter of standard Cat6A in a convenient 5-pack.

$18.49*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Monoprice SlimRun Cat6A Ethernet cables address one of the most common frustrations in networking: cable bulk. By using 30AWG pure bare copper conductors instead of the standard 23-24AWG found in conventional Cat6A cables, Monoprice has cut the cable diameter roughly in half without sacrificing the 10-Gigabit data transfer capability that Cat6A is rated for. The result is a cable that bends more easily, takes up less space in cable trays and bundles, and allows better airflow in equipment racks—practical benefits that matter most in high-density environments like server closets, patch panels, and crowded desks.

Each cable in this 5-pack is 7 feet long with white UTP (Unshielded Twisted Pair) construction and snagless RJ45 connectors on both ends. The snagless boot design protects the plastic locking tab from snagging on adjacent cables during installation or reconfiguration, a small detail that prevents one of the most common causes of connector failure. The pure bare copper wire ensures consistent conductivity and signal integrity across the full rated distance. For anyone building or maintaining a network where space is at a premium and cable management matters, these SlimRun cables offer a meaningful reduction in clutter without compromising on Cat6A performance.

Key Features

At half the size of standard Cat6A patch cables (0.149" v 0.29"), SlimRun Cat6A helps reduce congestion in high-density environments, such as data centers and telecommunications rooms

With SlimRun Cat6A, you can fit more cables in the same space, saving you the time and cost of expanding or replacing cable pathways

0.118-inch diameter, 30AWG flexible cable and snagless narrow boot design

5-Pack

Specifications

Brand
Monoprice
Model
115140
Cable Type
Cat6A Ethernet Patch Cable
Wire Gauge
30AWG
Construction
UTP (Unshielded Twisted Pair)
Conductor Material
Pure Bare Copper
Data Transfer Rate
10G
Length
7 Feet
Color
White
Connector
Snagless RJ45
Pack Quantity
5

Pros & Cons

👍 Pros

  • Half the diameter of standard Cat6A cables dramatically reduces bulk in dense cable runs
  • Pure bare copper conductors ensure reliable 10G data transfer performance
  • Five-pack provides enough cables for a typical small network setup at a bundled price
  • Snagless RJ45 connectors protect the locking tabs from breakage during handling
  • 30AWG construction makes the cables highly flexible and easy to route around tight corners

👎 Cons

  • 30AWG conductors are more fragile than standard gauge and less suited to permanent in-wall pulls
  • UTP construction lacks the shielding that may be needed in electrically noisy environments
  • 7-foot length may be too short for connections spanning larger rooms or between racks
  • Thinner cables can be more susceptible to damage from sharp bends or repeated flexing at the connector

Frequently Asked Questions

SlimRun cables use 30AWG conductors instead of the typical 23-24AWG found in standard Cat6A, reducing the cable diameter by roughly half. This makes them significantly more flexible and easier to route in tight spaces.
Yes, despite the smaller wire gauge, these cables are rated for 10G data transfer, meeting Cat6A performance standards for runs within their rated length.
UTP stands for Unshielded Twisted Pair. Unlike shielded (STP) cables, these rely on the twist rate of the conductor pairs for noise rejection rather than a foil or braid shield. For most home and office environments, UTP Cat6A is sufficient.
The snagless boot covers the locking tab on the RJ45 connector, preventing it from catching on other cables or equipment during installation and removal, which reduces the risk of tab breakage.
These cables use pure bare copper conductors, which provide better conductivity and reliability compared to copper-clad aluminum alternatives.