Panasonic

Panasonic RPHS220D Clip Sports Earphones with Extension - Orange

4.0 (27 reviews)

A 12.4mm neodymium driver delivers 101 dB/mW sensitivity in a sweat-resistant clip design built to stay put through every workout.

$21.31*
Check availability

*Price sourced from Amazon.com. Last updated:Jun 19, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Panasonic RP-HS220D is a sport-focused clip earphone built around a 12.4mm side-mount dynamic driver — a form factor choice that positions the driver at the entrance to the ear canal rather than inserting deeply, reducing listening fatigue during extended sessions. The neodymium magnet allows the driver to achieve 101 dB/mW sensitivity within a compact 0.26 oz body, and the 17.5 Ω impedance ensures compatibility across the full range of portable audio sources. The stated 10–22,000 Hz frequency response covers the full audible spectrum, and the side-firing driver orientation produces a broader, less pressurized sound profile than deep-insertion earphones.

The RP-HS220D is designed for active users who need an earphone that stays in place through impact — runners, cyclists, and gym users who have lost conventional earbuds mid-workout. The soft elastomer ear hanger distributes load across the outer ear rather than relying on ear canal tension alone, and the sweat- and water-resistant construction addresses the primary failure mode of budget sport earphones. The included extension cord adds practicality: train with 2.0 ft of cable for a clean, tangle-reduced setup, then attach the extension when your device is in a bag. At this price and form factor, the RP-HS220D fills a specific need — a light, secure, driveable earphone for athletic use where fit stability matters more than audiophile-grade resolution.

Key Features

In-the-ear type Clip Earphones, ideal for sports

Soft, comfort fit Elastomer Hanger

Sweat & water resistant design

Enhanced sound quality with large side mount 12.4mm speaker

Powerful Neodymium magnet

Specifications

Drive Unit
12.4 mm side mount dynamic
Impedance
17.5 Ω
Sensitivity
101 dB/mW
Max Input
100 mW
Frequency Response
10 – 22,000 Hz
Cord Length
2.0 ft + 2.0 ft extension
Weight (without cord)
0.26 oz
Plug
3.5mm nickel
Magnet Type
Neodymium
Color
Orange

Pros & Cons

👍 Pros

  • The 12.4mm side-mount driver is unusually large for a clip-style sport earphone, yielding more bass output than comparably priced competitors with 9–10mm drivers.
  • At 0.26 oz without cord, the earphone body exerts minimal pull on the ear clip during extended wear.
  • 101 dB/mW sensitivity means the RPHS220D reaches listening volume from low-output devices like older fitness trackers without clipping or distortion.
  • The detachable extension cord is practical — the short 2.0 ft default cord reduces cable flap while exercising, and the extension is there when you need the reach.
  • Neodymium magnet provides a stronger magnetic flux density per gram than ferrite alternatives, keeping the driver compact without sacrificing output.

👎 Cons

  • The 3.5mm nickel plug is not an L-shaped connector, which can create cable strain where it enters a phone case port during side-pocket use.
  • A 60 Hz upper frequency ceiling is not relevant here, but the 22 kHz ceiling, while technically adequate, leaves no headroom compared to earphones specced to 24–25 kHz.
  • No in-line microphone or remote is included, making these exclusively audio playback earphones — call answering requires reaching for the device.
  • The clip-over-ear fit works well for medium ear sizes but users with very small or very large ears may find the elastomer hanger fits loosely or causes pressure after 45+ minutes.

Frequently Asked Questions

The elastomer (soft rubber) hanger loops over the ear and flexes to conform to different ear shapes, distributing the weight of the earphone rather than relying solely on the ear canal insertion to hold position. This reduces the chance of the earphone working loose during running or cycling.
At 17.5 Ω, the RP-HS220D is a low-impedance load that virtually any portable source — smartphone, fitness tracker, MP3 player — can drive to full volume without an amplifier. The 101 dB/mW sensitivity compounds this: these will play loud from even weak headphone outputs.
The main cord is 2.0 ft; the included extension adds another 2.0 ft, giving you 4.0 ft total. The short default length keeps the cable from flopping during exercise, while the extension lets you reach a phone in a jacket pocket or bag.
The design is rated sweat- and water-resistant — meaning splash and perspiration protection — not full submersion. They will handle rain and heavy sweating reliably, but should not be submerged or rinsed under a tap.
The stated 10–22,000 Hz response covers the full audible range. The 12.4mm driver is large for an earbud-class earphone, which supports more low-frequency displacement — bass reproduction is more capable here than with typical 9–10mm budget sport earphones.